scholarly journals Hydrophilic PAN based carbon nanofibres with improved graphitic structure and enhanced mechanical performance using ethylenediamine functionalized graphene

RSC Advances ◽  
2017 ◽  
Vol 7 (5) ◽  
pp. 2621-2628 ◽  
Author(s):  
Zhenyu Li ◽  
Omid Zabihi ◽  
Jinfeng Wang ◽  
Quanxiang Li ◽  
Jiemin Wang ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
High Performance ◽  
Carbon Materials ◽  
Mechanical Performance ◽  
Low Cost ◽  
Functionalized Graphene ◽  
Carbon Nanofibres ◽  
Great Opportunity ◽  
Graphitic Structure

Polyacrylonitrile (PAN) reinforced with nano-carbons such as graphene (Gr) and carbon nanotubes (CNTs) provides great opportunity for the development of low-cost and high-performance carbon materials.

Direct Growth of Polyaniline Chains from Nitrogen Site of N-Doped Carbon Nanotubes for High Performance Supercapacitor

2014 ◽  
Vol 93 ◽  
pp. 164-167 ◽  
Author(s):  
Joon Won Lim ◽  
Atta Ul Haq ◽  
Sang Ouk Kim
Keyword(s):  
Carbon Nanotubes ◽  
High Performance ◽  
Chemical Structure ◽  
Carbon Materials ◽  
Graphitic Carbon ◽  
Polymer Grafting ◽  
Aniline Monomer ◽  
Defect Site ◽  
Direct Growth ◽  
Grafting From

Polymer grafting from graphitic carbon materials has been explored for several decades. Currently existing methods mostly employ harsh chemical treatment to generate defect site in graphitic carbon plane, which are used as active site for polymerization of precursors. Unfortunately, the treatment cause serious degradation of chemical structure and material properties. Here, we present a straightforward route for growth of polyaniline chain from nitrogen (N)-sites of carbon nanotubes. N site in the CNT wall initiates the polymerization of aniline monomer, which generates seamless hybrids composed of polyaniline directly grafted onto the CNT walls. The synthesized hybrids show excellent synergistic electrochemical performance, and are employed for electrodes of pseudo-capacitor. This approach offers an efficient way to obtain hybrid system consisting of conducting polymers directly grafted from graphitic dopant sites.

scholarly journals Nanocone-Shaped Carbon Nanotubes Field-Emitter Array Fabricated by Laser Ablation

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3244
Author(s):  
Jiuzhou Zhao ◽  
Zhenjun Li ◽  
Matthew Thomas Cole ◽  
Aiwei Wang ◽  
Xiangdong Guo ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Laser Ablation ◽  
High Performance ◽  
Low Cost ◽  
Field Emitter ◽  
Beam Focusing ◽  
Field Emitter Arrays ◽  
Emitter Array ◽  
Field Emitter Array ◽  
Tip Radius

The nanocone-shaped carbon nanotubes field-emitter array (NCNA) is a near-ideal field-emitter array that combines the advantages of geometry and material. In contrast to previous methods of field-emitter array, laser ablation is a low-cost and clean method that does not require any photolithography or wet chemistry. However, nanocone shapes are hard to achieve through laser ablation due to the micrometer-scale focusing spot. Here, we develop an ultraviolet (UV) laser beam patterning technique that is capable of reliably realizing NCNA with a cone-tip radius of ≈300 nm, utilizing optimized beam focusing and unique carbon nanotube–light interaction properties. The patterned array provided smaller turn-on fields (reduced from 2.6 to 1.6 V/μm) in emitters and supported a higher (increased from 10 to 140 mA/cm2) and more stable emission than their unpatterned counterparts. The present technique may be widely applied in the fabrication of high-performance CNTs field-emitter arrays.

Novel ionic bioartificial muscles based on ionically crosslinked multi-walled carbon nanotubes-mediated bacterial cellulose membranes and PEDOT:PSS electrodes

2021 ◽  
Author(s):  
Yaofeng Wang ◽  
Fan Wang ◽  
Yang Kong ◽  
Lei Wang ◽  
Qinchuan Li
Keyword(s):  
Carbon Nanotubes ◽  
Bacterial Cellulose ◽  
Specific Capacitance ◽  
High Performance ◽  
Low Cost ◽  
Actuation Voltage ◽  
Fast Response ◽  
Bending Deformation ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Abstract High-performance bioartificial muscles with low-cost, large bending deformation, low actuation voltage, and fast response time have drawn extensive attention as the development of human-friendly electronics in recent years. Here, we report a high-performance ionic bioartificial muscle based on the bacterial cellulose (BC)/ionic liquid (IL)/multi-walled carbon nanotubes (MWCNT) nanocomposite membrane and PEDOT:PSS electrode. The developed ionic actuator exhibits excellent electro-chemo-mechanical properties, which are ascribed to its high ionic conductivity, large specific capacitance, and ionically crosslinked structure resulting from the strong ionic interaction and physical crosslinking among BC, IL, and MWCNT. In particular, the proposed BC-IL-MWCNT (0.10 wt%) nanocomposite exhibited significant increments of Young's modulus up to 75% and specific capacitance up to 77%, leading to 2.5 times larger bending deformation than that of the BC-IL actuator. More interestingly, bioinspired applications containing artificial soft robotic finger and grapple robot were successfully demonstrated based on high-performance BC-IL-MWCNT actuator with excellent sensitivity and controllability. Thus, the newly proposed BC-IL-MWCNT bioartificial muscle will offer a viable pathway for developing next-generation artificial muscles, soft robotics, wearable electronic products, flexible tactile devices, and biomedical instruments.

scholarly journals Review on Carbon/Polyaniline Hybrids: Design and Synthesis for Supercapacitor

Molecules ◽  
2019 ◽  
Vol 24 (12) ◽  
pp. 2263 ◽  
Author(s):  
Xiaoning Wang ◽  
Dan Wu ◽  
Xinhui Song ◽  
Wei Du ◽  
Xiangjin Zhao ◽  
...  
Keyword(s):  
Energy Storage ◽  
Hybrid Materials ◽  
Active Sites ◽  
High Performance ◽  
Electrode Materials ◽  
Carbon Materials ◽  
Low Cost ◽  
Specific Capacity ◽  
Chemical Properties ◽  
Combine Carbon

Polyaniline has been widely used in high-performance pseudocapacitors, due to its low cost, easy synthesis, and high theoretical specific capacitance. However, the poor mechanical properties of polyaniline restrict its further development. Compared with polyaniline, functionalized carbon materials have excellent physical and chemical properties, such as porous structures, excellent specific surface area, good conductivity, and accessibility to active sites. However, it should not be neglected that the specific capacity of carbon materials is usually unsatisfactory. There is an effective strategy to combine carbon materials with polyaniline by a hybridization approach to achieve a positive synergistic effect. After that, the energy storage performance of carbon/polyaniline hybridization material has been significantly improved, making it a promising and important electrode material for supercapacitors. To date, significant progress has been made in the synthesis of various carbon/polyaniline binary composite electrode materials. In this review, the corresponding properties and applications of polyaniline and carbon hybrid materials in the energy storage field are briefly reviewed. According to the classification of different types of functionalized carbon materials, this article focuses on the recent progress in carbon/polyaniline hybrid materials, and further analyzes their corresponding properties to provide guidance for the design, synthesis, and component optimization for high-performance supercapacitors.

scholarly journals Improved Mechanical and Electrochemical Properties of XNBR Dielectric Elastomer Actuator by Poly(dopamine) Functionalized Graphene Nano-Sheets

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 218 ◽  
Author(s):  
Dan Yang ◽  
Xinxin Kong ◽  
Yufeng Ni ◽  
Mengnan Ruan ◽  
Shuo Huang ◽  
...  
Keyword(s):  
Electrochemical Properties ◽  
High Performance ◽  
Low Cost ◽  
Dielectric Strength ◽  
Dielectric Elastomer ◽  
Hydroxyl Groups ◽  
Butadiene Rubber ◽  
Functionalized Graphene ◽  
Filler Dispersion ◽  
Phenolic Hydroxyl Groups

In this work, graphene nano-sheets (GNS) functionalized with poly(dopamine) (PDA) (denoted as GNS-PDA) were dispersed in a carboxylated nitrile butadiene rubber (XNBR) matrix to obtain excellent dielectric composites via latex mixing. Because hydrogen bonds were formed between –COOH groups of XNBR and phenolic hydroxyl groups of PDA, the encapsulation of GNS-PDA around XNBR latex particles was achieved, and led to a segregated network structure of filler formed in the GNS-PDA/XNBR composite. Thus, the XNBR composite filled with GNS-PDA showed improved filler dispersion, enhanced dielectric constant and dielectric strength, and decreased conductivity compared with the XNBR composite filled with pristine GNS. Finally, the GNS-PDA/XNBR composite displayed an actuated strain of 2.4% at 18 kV/mm, and this actuated strain was much larger than that of pure XNBR (1.3%) at the same electric field. This simple, environmentally friendly, low-cost, and effective method provides a promising route for obtaining a high-performance dielectric elastomer with improved mechanical and electrochemical properties.

scholarly journals Joule Heating-Induced Carbon Fibers for Flexible Fiber Supercapacitor Electrodes

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5255
Author(s):  
Jin Gu Kang ◽  
Gang Wang ◽  
Sung-Kon Kim
Keyword(s):  
Carbon Nanotubes ◽  
Joule Heating ◽  
High Performance ◽  
Electrochemical Impedance ◽  
High Current Density ◽  
Low Cost ◽  
Fast Response ◽  
Extrusion Process ◽  
Composite Fiber ◽  
Flexible Fiber

Microscale fiber-based supercapacitors have become increasingly important for the needs of flexible, wearable, and lightweight portable electronics. Fiber electrodes without pre-existing cores enable a wider selection of materials and geometries than is possible through core-containing electrodes. The carbonization of fibrous precursors using an electrically driven route, different from a conventional high-temperature process, is particularly promising for achieving this structure. Here, we present a facile and low-cost process for producing high-performance microfiber supercapacitor electrodes based on carbonaceous materials without cores. Fibrous carbon nanotubes-agarose composite hydrogels, formed by an extrusion process, are converted to a composite fiber consisting of carbon nanotubes (CNTs) surrounded by an amorphous carbon (aC) matrix via Joule heating. When assembled into symmetrical two-electrode cells, the composite fiber (aC-CNTs) supercapacitor electrodes deliver a volumetric capacitance of 5.1 F cm−3 even at a high current density of 118 mA cm−3. Based on electrochemical impedance spectroscopy analysis, it is revealed that high electrochemical properties are attributed to fast response kinetics with a characteristic time constant of 2.5 s. The aC-CNTs fiber electrodes exhibit a 94% capacitance retention at 14 mA cm−3 for at least 10,000 charge-discharge cycles even when deformed (90° bend), which is essentially the same as that (96%) when not deformed. The aC-CNTs fiber electrodes also demonstrate excellent storage performance under mechanical deformation—for example, 1000 bending-straightening cycles.

SUSTAINABLE ULTRA-HIGH-PERFORMANCE GLASS CONCRETE FOR INFRASTRUCTURES

2017 ◽  
Vol 4 (1) ◽  
Author(s):  
Arezki Tagnit-Hamou ◽  
Nancy A. Soliman
Keyword(s):  
High Performance ◽  
Glass Powder ◽  
Mechanical Performance ◽  
High Performance Concrete ◽  
Low Cost ◽  
Research Work ◽  
High Strength ◽  
Quartz Powder ◽  
Ultra High Performance Concrete ◽  
Powder Particles

This paper presents research work on the development of a green type of ultra-high-performance concrete using ground glass powders with different degrees of fineness (UHPGC). This article presents the development of an innovative, low-cost, and sustainable UHPGC through the use of glass powder to replace cement, and quartz powder particles. An UHPGC with a compressive strength (fc) of up to 220 MPa was prepared and its fresh, and mechanical properties were investigated. The test results indicate that the fresh UHPGC properties were improved when the cement and quartz powder were replaced with non-absorptive glass powder particles. The strength improvement can be attributed to the glass powder’s pozzolanicity and to its mechanical performance (very high strength and elastic modulus of glass). A case study of using this UHPGC is presented through the design and construction of a footbridge. Erection of footbridge at University of Sherbrooke Campus using UHPGC is also presented as a full-scale application.

scholarly journals Carbon nanotubes/Al2O3 composite derived from catalytic reforming of the pyrolysis volatiles of the mixture of polyethylene and lignin for highly-efficient removal of Pb(ii)

RSC Advances ◽  
2021 ◽  
Vol 11 (60) ◽  
pp. 37851-37865
Author(s):  
Zhanghong Wang ◽  
Kun Qin ◽  
Zhikang Wang ◽  
Dekui Shen ◽  
Chunfei Wu
Keyword(s):  
Carbon Nanotubes ◽  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Carbon Materials ◽  
Low Cost ◽  
Efficient Removal ◽  
Catalytic Reforming ◽  
Al2o3 Composite ◽  
High Efficient

The coked catalysts derived from catalytic reforming of the pyrolysis volatiles of polyethylene, lignin and their mixture were developed as low-cost and high-efficient carbon materials-containing composites to remove heavy metal ions from water.

scholarly journals Synchronously Strengthen and Toughen Polypropylene Using Tartaric Acid-Modified Nano-CaCO3

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2493
Author(s):  
Junlong Yao ◽  
Hanchao Hu ◽  
Zhengguang Sun ◽  
Yucong Wang ◽  
Huabo Huang ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Impact Toughness ◽  
Tartaric Acid ◽  
High Performance ◽  
Mechanical Performance ◽  
Low Cost ◽  
Complexing Agent ◽  
Environmental Technology ◽  
The Impact ◽  
First Time

In order to overcome the challenge of synchronously strengthening and toughening polypropylene (PP) with a low-cost and environmental technology, CaCO3 (CC) nanoparticles are modified by tartaric acid (TA), a kind of food-grade complexing agent, and used as nanofillers for the first time. The evaluation of mechanical performance showed that, with 20 wt.% TA-modified CC (TAMCC), the impact toughness and tensile strength of TAMCC/PP were 120% and 14% more than those of neat PP, respectively. Even with 50 wt.% TAMCC, the impact toughness and tensile strength of TAMCC/PP were still superior to those of neat PP, which is attributable to the improved compatibility and dispersion of TAMCC in a PP matrix, and the better fluidity of TAMCC/PP nanocomposite. The strengthening and toughening mechanism of TAMCC for PP involves interfacial debonding between nanofillers and PP, and the decreased crystallinity of PP, but without the formation of β-PP. This article presents a new applicable method to modify CC inorganic fillers with a green modifier and promote their dispersion in PP. The obtained PP nanocomposite simultaneously achieved enhanced mechanical strength and impact toughness even with high content of nanofillers, highlighting bright perspective in high-performance, economical, and eco-friendly polymer-inorganic nanocomposites.

Sign in / Sign up

Export Citation Format

Share Document