scholarly journals High absorption shielding material of poly(phthalazinone etherketone)/multiwall carbon nanotube composite films with sandwich configurations

RSC Advances ◽  
2019 ◽  
Vol 9 (33) ◽  
pp. 18758-18766 ◽  
Author(s):  
Yunping Hu ◽  
Ping Tang ◽  
Longwei Li ◽  
Junyu Yang ◽  
Xigao Jian ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Composite Films ◽  
Multiwall Carbon Nanotube ◽  
Shielding Effectiveness ◽  
Carbon Nanotube Composite ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se ◽  
Shielding Material ◽  
Multiwall Carbon ◽  
High Absorption

Sandwich structure can be induced to achieve excellent electromagnetic interference shielding effectiveness (EMI SE) as is well known.

The Humidity Sensitive Behavior of Poly(Ethyleneimine)/Multiwall Carbon Nanotube Composite Films

2012 ◽  
Vol 531-532 ◽  
pp. 588-591
Author(s):  
Tao Zhu ◽  
Guang Zhong Xie ◽  
Ya Dong Jiang ◽  
Jian Liao ◽  
Hui Ling Tai
Keyword(s):  
Carbon Nanotube ◽  
Relative Humidity ◽  
Composite Films ◽  
Multiwall Carbon Nanotube ◽  
Sensing Material ◽  
Nanotube Composites ◽  
Interdigitated Microelectrode ◽  
Carbon Nanotube Composite ◽  
Multiwall Carbon ◽  
Sensitive Behavior

In this paper, a novel humidity sensor based on polymer-carbon nanotube composites was prepared and characterized. Two different methods were adopted to fabricate the humidity-sensing film for these sensors. The surface of the films was observed by a scanning electron microscope (SEM). The sensing material made up of poly(ethyleneimine) and multiwall carbon nanotube was sprayed on the interdigitated microelectrode pairs(IDTs). The resistance between the two electrodes was measured at different relative humidity levels at 19°C. The data shows that the resistance increases with the rise of the relative humidity over the range of 5-90% RH and that, the resistance increases almost linearly in the range of 5-71% RH. The response of the sensors to NO2 and NH3 were also examined, and the results reveal that the sensor is not sensitive to both of them.

Electromagnetic interference shielding effectiveness of polypyrrole-silver nanocomposite films on silane-modified flexible sheet

2021 ◽  
pp. 095400832110645
Author(s):  
Karim Benzaoui ◽  
Achour Ales ◽  
Ahmed Mekki ◽  
Abdelhalim Zaoui ◽  
Boudjemaa Bouaouina ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Electromagnetic Interference ◽  
Nanocomposite Films ◽  
Electrical Characteristics ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Silver Nanocomposite ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

The conventional electromagnetic interference (EMI) shielding materials are being gradually replaced by a new generation of supported conducting polymer composites (CPC) films due to their many advantages. This work presents a contribution on the effects of silane surface–modified flexible polypyrrole-silver nanocomposite films on the electromagnetic interference shielding effectiveness (EMI-SE). Thus, the UV-polymerization was used to in-situ deposit the PPy-Ag on the biaxial oriented polyethylene terephthalate (BOPET) flexible substrates whose surfaces were treated by 3-aminopropyltrimethoxysilane (APTMS). X-ray Photoelectron Spectroscopy (XPS) analyzes confirmed the APTMS grafting procedure. Structural, morphological, thermal, and electrical characteristics of the prepared films were correlated to the effect of substrate surface treatment. Thereafter, EMI-SE measurements of the elaborated films were carried out as per ASTM D4935 standard for a wide frequency band extending from 50 MHz to 18 GHz. The obtained results confirmed that the APTMS-treated BOPET film exhibit higher EMI shielding performance and better electrical characteristics compared to the untreated film. In fact, a 32% enhancement of EMI-SE was noted for the treated films compared to the untreated ones. Overall, these results put forward the role played by the surface treatment in strengthening the position of flexible PPy-Ag supported films as high-performance materials in electronic devices and electromagnetic interference shielding applications.

scholarly journals Robust Design of PC/ABS Filled with Nano Carbon Black for Electromagnetic Shielding Effectiveness and Surface Resistivity

Processes ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 616
Author(s):  
Wipoo Sriseubsai ◽  
Arsarin Tippayakraisorn ◽  
Jun Wei Lim
Keyword(s):  
Carbon Black ◽  
Electromagnetic Interference ◽  
Electrostatic Discharge ◽  
Acrylonitrile Butadiene Styrene ◽  
Surface Resistivity ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Electromagnetic Shielding Effectiveness ◽  
Emi Se ◽  
Butadiene Styrene

This study focuses on the electromagnetic interference shielding effectiveness (EMI SE), dissipation of electrostatic discharge (ESD), and surface resistivity of polymer blends between polycarbonate (PC) and acrylonitrile–butadiene–styrene (ABS) filled with carbon black powder (CBp) and carbon black masterbatch (CBm). The mixtures of PC/ABS/CB composites were prepared by the injection molding for the 4-mm thickness of the specimen. The D-optimal mixture design was applied in this experiment. The EMI SE was measured at the frequency of 800 and 900 MHz with a network analyzer, MIL-STD-285. The result showed that the EMI SE was increased when the amount of filler increased. The surface resistivity of the composites was determined according to the ASTM D257. It was found that the surface resistivity of the plastic with no additives was 1012 Ω/ square. When the amount of fillers was added, the surface resistivity of plastic composites decreased to the range of 106–1011 Ω/square, which was suitable for the application without the electrostatic discharge. The optimization of multi-response showed using high amounts of PC and CB was the best mixture of this research.

Tunable electromagnetic interference shielding ability of MXene/chitosan/silver nanowire sandwich films

2021 ◽  
pp. 2151041
Author(s):  
Wei Wang ◽  
Xiaoyu Bing ◽  
Yutong Zhou ◽  
Miaomiao Geng ◽  
Yanhu Zhan ◽  
...  
Keyword(s):  
Thin Films ◽  
Electromagnetic Interference ◽  
Hybrid Composites ◽  
Core Layer ◽  
Structure Design ◽  
Silver Nanowire ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

The structural design of thin films is attracting attention in academia and industry in attempts to improve electromagnetic interference shielding effectiveness (EMI SE). In this study, MXene/chitosan/silver nanowire (AgNW) sandwich films, in which the AgNW core layer was bordered by two MXene/chitosan layers, were fabricated by vacuum-assisted filtration. Because of the interconnected AgNWs in the core layer and the aligned MXene sheets in the MXene/chitosan layers, the electrical conductivity of the sandwich film reached 11,459.1 S/m. Consequently, the sandwich film exhibited an SE value of 82.3 dB. What is more, when both the AgNW and MXene contents were 33.3%, the sandwich film’s EMI SE divided by its thickness was 26,167 dB/cm, which was much superior to the values reported for inorganic hybrid composites and polymer composites filled with hybrid fillers. Such a simple approach was proved to be an effective way for further structure design of thin films in EMI shielding field.

Microwave Irradiation of Graphene Aerogel and Its Use on the Electromagnetic Interference Shielding of BMI Nanocomposites

NANO ◽  
2020 ◽  
Vol 15 (11) ◽  
pp. 2050143
Author(s):  
Bowen Feng ◽  
Wei Li ◽  
Fei Xue ◽  
Xingyu Tong ◽  
Jiaying Li ◽  
...  
Keyword(s):  
Self Assembly ◽  
Electromagnetic Interference ◽  
Chemical Reduction ◽  
Three Dimensional ◽  
Microwave Treatment ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Graphene Aerogels ◽  
Electromagnetic Interference Shielding Effectiveness ◽  
Emi Se

In this work, graphene aerogels (GAs) with three-dimensional interconnected networks were prepared by chemical reduction and self-assembly of graphene oxide sheets. After microwave treatment, obtained microwave reduced graphene aerogels (MRGAs) were used in the preparation of bismaleimide (BMI) composites. The results show that the microwave treatment significantly enhanced the quality of GAs, and the three-dimensional networks in the GAs were well retained. Moreover, the MRGAs were highly efficient in endowing BMI with high electrical conductivity and excellent electromagnetic interference shielding effectiveness (EMI SE). The conductivity of MRGA/BMI composites was 42–68% higher than that of GA/BMI composites. When the filler content is 1.6 wt.%, the EMI SE of MRGA/BMI composite was 32.3% higher than that of GA/BMI composite in the X band.

Fabrication and characterization of organic semiconductor for electromagnetic interference shielding material

2011 ◽  
Vol 31 (4) ◽  
Author(s):  
Habibun Nabi Muhammad Ekramul Mahmud ◽  
Anuar Kassim
Keyword(s):  
Conducting Polymer ◽  
Polymer Composite ◽  
Indium Tin Oxide ◽  
Electromagnetic Interference ◽  
Composite Films ◽  
Oxide Glass ◽  
Poly Vinyl Alcohol ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Shielding Material

Abstract Conducting polymer films produced by electropolymerization technique are highly conductive, simple, and suitable for use especially in electronic devices. An attempt has been made to produce polypyrrole-poly(vinyl alcohol) (PPy-PVA) conducting polymer composite films using 0.1 m p-toluene sulfonate dopant at a potential of 1.2 V (vs. standard calomel electrode) on indium tin oxide glass electrode. The potential application of the prepared PPy-PVA conducting polymer composite films as an electromagnetic interference (EMI) shielding material has been investigated in the present study. The EMI shielding effectiveness of PPy-PVA composite films prepared from different experimental conditions was analyzed in the microwave frequency range of 8–12 GHz. The shielding effectiveness of 45.67–35.7 dB has been demonstrated by PPy-PVA conducting polymer composite films, which appears to be very attractive in any EMI shielding applications where a minimum shielding effectiveness of 35 dB is required.

Sign in / Sign up

Export Citation Format

Share Document