Separation of phenylenediamine isomers by using decamethylcucurbit[5]uril

2021 ◽  
Author(s):  
Long Cao ◽  
Han-Ling Guo ◽  
Rui Lian Lin ◽  
Li-Fei Tian ◽  
Zhi-Hua Zhang ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Solid State ◽  
Phenylenediamine Isomers

Using multiple techniques, this work studied the binding behaviors of decamethylcucurbit[5]uril (Me10Q[5]) with o-, m- and p-phenylenediamine (PDA) isomers both in solid state and in aqueous solution. Experimental data indicate...

Utilization of Waste of Enzymes Biomass as Biosorbent for the Removal of Dyes from Aqueous Solution in Batch and Fluidized Bed Column

2020 ◽  
Vol 71 (1) ◽  
pp. 1-12
Author(s):  
Salman H. Abbas ◽  
Younis M. Younis ◽  
Mohammed K. Hussain ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Particle Size ◽  
Adsorption Capacity ◽  
Fluidized Bed ◽  
Flow Rate ◽  
Fungal Biomass ◽  
Solution Flow Rate ◽  
Maximum Adsorption Capacity ◽  
Solution Flow

The biosorption performance of both batch and liquid-solid fluidized bed operations of dead fungal biomass type (Agaricusbisporus ) for removal of methylene blue from aqueous solution was investigated. In batch system, the adsorption capacity and removal efficiency of dead fungal biomass were evaluated. In fluidized bed system, the experiments were conducted to study the effects of important parameters such as particle size (701-1400�m), initial dye concentration(10-100 mg/L), bed depth (5-15 cm) and solution flow rate (5-20 ml/min) on breakthrough curves. In batch method, the experimental data was modeled using several models (Langmuir,Freundlich, Temkin and Dubinin-Radushkviechmodels) to study equilibrium isotherms, the experimental data followed Langmuir model and the results showed that the maximum adsorption capacity obtained was (28.90, 24.15, 21.23 mg/g) at mean particle size (0.786, 0.935, 1.280 mm) respectively. In Fluidized-bed method, the results show that the total ion uptake and the overall capacity will be decreased with increasing flow rate and increased with increasing initial concentrations, bed depth and decreasing particle size.

Capillary flows and self-assembly of porous hydrate structures

2012 ◽  
Vol 9 (1) ◽  
pp. 22-25
Author(s):  
S.V. Amel’kin ◽  
D.Ye. Igoshin
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Self Assembly ◽  
Capillary Flow ◽  
Secondary Crystallization ◽  
Assembly Model ◽  
Physical Processes ◽  
Good Correspondence ◽  
Solution Formation ◽  
Capillary Flows

A self-assembly model for porous hydrate structures is proposed, which takes into account the sequence of basic physical processes: hydrate growth on the surface of the aqueous solution, formation of islet structure, capillary flow, separation and transfer of secondary crystallization nuclei to the meniscus. The model was studied within the cellular automata method. A good correspondence between the results of the simulation and the experimental data is obtained.

scholarly journals Electrochemiluminescence Study of Europium (III) Complex with Coumarin3-Carboxylic Acid

2008 ◽  
Vol 2008 ◽  
pp. 1-6 ◽  
Author(s):  
Stefan Lis ◽  
Krzysztof Staninski ◽  
Tomasz Grzyb
Keyword(s):  
Aqueous Solution ◽  
Spectral Analysis ◽  
Energy Transfer ◽  
Solid State ◽  
Carboxylic Acid ◽  
Elemental Analysis ◽  
Aluminium Electrode ◽  
The Eu

The europium (III) complex of coumarin-3-carboxylic acid (C3CA) has been prepared and characterized on the basis of elemental analysis, IR, and emission (photoluminescence and electrochemiluminescence) spectroscopy. The synthesised complex having a formula Eu was photophysically characterized in solution and in the solid state. Electrochemiluminescence, ECL, of the system containing the Eu(III)/C3CA complex was studied using an oxide-covered aluminium electrode. The goal of these studies was to show the possibility of the use of electrochemical excitation of the Eu(III) ion in aqueous solution for emission generation. The generated ECL emission was very weak, and therefore its measurements and spectral analysis were carried out with the use of cut-off filters method. The studies proved a predominate role of the ligand-to-metal energy transfer (LMET) in the generated ECL.

Enhanced adsorption removal of methyl orange from aqueous solution by nanostructured proton-containing δ-MnO2

2015 ◽  
Vol 3 (10) ◽  
pp. 5674-5682 ◽  
Author(s):  
Yan Liu ◽  
Chao Luo ◽  
Jian Sun ◽  
Haizhen Li ◽  
Zebin Sun ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methyl Orange ◽  
Solid State ◽  
Solid State Reaction ◽  
Proton Exchange ◽  
Precipitation Method ◽  
Homogeneous Precipitation ◽  
Adsorption Removal ◽  
Homogeneous Precipitation Method ◽  
Enhanced Adsorption

Two nanostructured proton-containing δ-MnO2 (H-δ-MnO2) materials were synthesized through proton exchange for K-containing δ-MnO2 (K-δ-MnO2) nanosheets and nanoparticles prepared by the hydrothermal homogeneous precipitation method and solid-state reaction.

Technological Features of the Liquid-Solid State of the Boundary Layer in the Processes of Bimetallic Products

2022 ◽  
Vol 1049 ◽  
pp. 53-61
Author(s):  
Valeriy Lykhoshva ◽  
Dmitry Glushkov ◽  
Elena Reintal ◽  
Valeriy V. Savin ◽  
Ludmila Alexeyevna Savina ◽  
...  
Keyword(s):  
Mathematical Modeling ◽  
Experimental Data ◽  
Boundary Layer ◽  
Solid State ◽  
Liquid Phase ◽  
Contact Zone ◽  
Thermal Field ◽  
Thermal State ◽  
Existence Time ◽  
Modeling Data

The hydrodynamic and thermal state in the contact zone of the layers of a bimetallic product obtained by pouring liquid iron onto a solid steel billet, which changes in time and is responsible for the strength of the diffusion joint and the geometric parameters of the transition layer, has been investigated. Simplified analytical dependences, mathematical modeling data and experimental results of the liquid phase existence time in the contact zone based on research of the melt velocities during pouring and changes in the thermal field are presented. It is shown that simplified calculations data coincide in order and are close in values ​​to the calculations of mathematical modeling and experimental data, which makes it possible to use them for preliminary rough estimates by technologists and metallurgists.

Mechanistic studies on the decomposition of sodium cyanide in aqueous solution and in the solid state

2005 ◽  
Vol 153 (2-3) ◽  
pp. 125-131 ◽  
Author(s):  
Hiroshi Nishioka ◽  
Mayumi Nishikawa ◽  
Munehiro Katagi ◽  
Hitoshi Tsuchihashi ◽  
Osamu Muraoka
Keyword(s):  
Aqueous Solution ◽  
Solid State ◽  
Sodium Cyanide ◽  
Mechanistic Studies

A fluorescence study on the complexation of Sm(iii), Eu(iii) and Tb(iii) with tetraalkyldiglycolamides (TRDGA) in aqueous solution, in solid state, and in solvent extraction

2016 ◽  
Vol 45 (46) ◽  
pp. 18484-18493 ◽  
Author(s):  
Fei Kou ◽  
Suliang Yang ◽  
Hongjuan Qian ◽  
Lihua Zhang ◽  
Christine M. Beavers ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Solid State ◽  
Solvent Extraction ◽  
Lanthanide Ions ◽  
Tridentate Ligand ◽  
Fluorescence Study ◽  
Trivalent Lanthanide

Trivalent lanthanide ions form 1 : 1, 1 : 2, and 1 : 3 complexes with tridentate ligand TMDGA in 1 M H/NaNO3 and form 1 : 3 extracted complexes with DMDODGA during solvent extraction.

Sign in / Sign up

Export Citation Format

Share Document