scholarly journals High-performance non-enzymatic glucose detection: using a conductive Ni-MOF as an electrocatalyst

2020 ◽  
Vol 8 (25) ◽  
pp. 5411-5415 ◽  
Author(s):  
Yanxia Qiao ◽  
Qian Liu ◽  
Siyu Lu ◽  
Guang Chen ◽  
Shuyan Gao ◽  
...  
Keyword(s):  
Detection Limit ◽  
Response Time ◽  
Blood Serum ◽  
High Performance ◽  
Glucose Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Glucose Detection ◽  
Serum Samples ◽  
Fast Response Time

A glucose sensor based on a conductive Ni-MOF as an electrocatalyst exhibits a fast response time, low detection limit, and high sensitivity, and it can also be applied for the detection of glucose in blood serum samples.

A comparative study of electrocatalytic oxidation of glucose on conductive Ni-MOF nanosheet arrays with different ligands

2020 ◽  
Vol 44 (41) ◽  
pp. 17849-17853
Author(s):  
Yanxia Qiao ◽  
Rui Zhang ◽  
Fangyuan He ◽  
Wenli Hu ◽  
Xiaowei Cao ◽  
...  
Keyword(s):  
Detection Limit ◽  
Comparative Study ◽  
Response Time ◽  
Electrocatalytic Oxidation ◽  
Glucose Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Serum Samples ◽  
Nanosheet Arrays ◽  
Oxidation Of Glucose

A glucose sensor based on conductive Ni-MOF nanosheet arrays/CC exhibits a fast response time, a low detection limit, a high sensitivity, and it can also be applied for the detection of glucose in human serum samples.

Templating synthesis of hollow CuO polyhedron and its application for nonenzymatic glucose detection

2014 ◽  
Vol 2 (20) ◽  
pp. 7306-7312 ◽  
Author(s):  
Chuncai Kong ◽  
Linli Tang ◽  
Xiaozhe Zhang ◽  
Shaodong Sun ◽  
Shengchun Yang ◽  
...  
Keyword(s):  
Detection Limit ◽  
Modified Electrode ◽  
Glucose Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Good Stability ◽  
Glucose Detection ◽  
Nonenzymatic Glucose Sensor ◽  
Oxidation Of Glucose ◽  
Templating Synthesis

In this paper, we successfully fabricated a novel type of a hollow CuO polyhedron that consists of numerous nanoplates using Cu2O as a template. The hollow CuO polyhedron-modified electrode exhibits high sensitivity, low detection limit, good stability and fast response towards the oxidation of glucose, suggesting it to be a promising nonenzymatic glucose sensor.

scholarly journals Dual-Cation Electrolytes Crosslinked with MXene for High-Performance Electrochromic Devices

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 874
Author(s):  
Soyoung Bae ◽  
Youngno Kim ◽  
Jeong Min Kim ◽  
Jung Hyun Kim
Keyword(s):  
Ionic Conductivity ◽  
Response Time ◽  
Indium Tin Oxide ◽  
High Performance ◽  
Fast Response ◽  
High Ionic Conductivity ◽  
Electrochromic Device ◽  
Fast Response Time ◽  
Coloration Efficiency ◽  
Conduction Pathway

MXene, a 2D material, is used as a filler to manufacture polymer electrolytes with high ionic conductivity because of its unique sheet shape, large specific surface area and high aspect ratio. Because MXene has numerous -OH groups on its surface, it can cause dehydration and condensation reactions with poly(4-styrenesulfonic acid) (PSSA) and consequently create pathways for the conduction of cations. The movement of Grotthuss-type hydrogen ions along the cation-conduction pathway is promoted and a high ionic conductivity can be obtained. In addition, when electrolytes composed of a conventional acid or metal salt alone is applied to an electrochromic device (ECD), it does not bring out fast response time, high coloration efficiency and transmittance contrast simultaneously. Therefore, dual-cation electrolytes are designed for high-performance ECDs. Bis(trifluoromethylsulfonyl)amine lithium salt (LiTFSI) was used as a source of lithium ions and PSSA crosslinked with MXene was used as a source of protons. Dual-Cation electrolytes crosslinked with MXene was applied to an indium tin oxide-free, all-solution-processable ECD. The effect of applying the electrolyte to the device was verified in terms of response time, coloration efficiency and transmittance contrast. The ECD with a size of 5 × 5 cm2 showed a high transmittance contrast of 66.7%, fast response time (8 s/15 s) and high coloration efficiency of 340.6 cm2/C.

A dual-responsive fluorescent sensor for Hg2+ and thiols based on N-doped silicon quantum dots and its application in cell imaging

2019 ◽  
Vol 7 (44) ◽  
pp. 7033-7041 ◽  
Author(s):  
Sansan Shen ◽  
Bohui Huang ◽  
Xiaofeng Guo ◽  
Hong Wang
Keyword(s):  
Quantum Dots ◽  
Response Time ◽  
Cell Imaging ◽  
Fluorescent Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Silicon Quantum Dots ◽  
Fast Response Time ◽  
Dual Responsive ◽  
Doped Silicon

An on–off–on fluorescent sensor based on N-SiQD has the advantages of fast response time and high sensitivity to Hg2+ and GSH.

Highly sensitive potentiometric sensors for thorium ions detection using morpholine derivative self-assembled on silver nanoparticles

RSC Advances ◽  
2016 ◽  
Vol 6 (81) ◽  
pp. 77854-77862 ◽  
Author(s):  
Zeinab F. Akl ◽  
Tamer Awad Ali
Keyword(s):  
Silver Nanoparticles ◽  
Detection Limit ◽  
Response Time ◽  
Water Samples ◽  
High Selectivity ◽  
Fast Response ◽  
Potentiometric Sensors ◽  
Fast Response Time ◽  
Highly Sensitive ◽  
Morpholine Derivative

Potentiometric screen-printed electrodes were constructed for Th(iv) determination in water samples. The optimized electrodes exhibited fast response time, wide linear range, low detection limit and high selectivity towards Th(iv) ions.

High performance electrochromic devices based on a polyindole derivative, poly(1H-benzo[g]indole)

2015 ◽  
Vol 3 (43) ◽  
pp. 11318-11325 ◽  
Author(s):  
Guangming Nie ◽  
Ling Wang ◽  
Changlong Liu
Keyword(s):  
Response Time ◽  
High Performance ◽  
Optical Memory ◽  
Fast Response ◽  
Electrochromic Devices ◽  
Optical Contrast ◽  
Fast Response Time ◽  
Coloration Efficiency ◽  
Long Term Stability

An ECD based on electrochromic poly(1H-benzo[g]indole) was fabricated. The color of this ECD can switch between green and navy blue with good optical contrast, high coloration efficiency, fast response time, better optical memory and long-term stability.

scholarly journals Highly active and porous single-crystal In2O3 nanosheet for NOx gas sensor with excellent response at room temperature

RSC Advances ◽  
2017 ◽  
Vol 7 (53) ◽  
pp. 33419-33425 ◽  
Author(s):  
Li Sun ◽  
Wencheng Fang ◽  
Ying Yang ◽  
Hui Yu ◽  
Tingting Wang ◽  
...  
Keyword(s):  
Detection Limit ◽  
Response Time ◽  
Single Crystal ◽  
Gas Sensor ◽  
Room Temperature ◽  
Fast Response ◽  
Fast Response Time ◽  
Excellent Response ◽  
Highly Active ◽  
Nox Gas Sensor

Porous single-crystal In2O3 nanosheet was well-designed and prepared through calcination after liquid reflux, then exhibited a distinguished response, fast response time to NOx with good selectivity and low detection limit at room temperature.

scholarly journals Nanostructured copper selenide as an ultrasensitive and selective non-enzymatic glucose sensor

2021 ◽  
Author(s):  
Siddesh Umapathi ◽  
Harish Singh ◽  
Jahangir Masud ◽  
Manashi Nath
Keyword(s):  
Detection Limit ◽  
High Efficiency ◽  
Glucose Sensor ◽  
High Sensitivity ◽  
Copper Selenide ◽  
Glucose Detection ◽  
Applied Potential ◽  
Detection Range ◽  
Low Detection Limit ◽  
Linear Detection

CuSe nanostructures exhibit high-efficiency for glucose detection with high sensitivity (19.419 mA mM−1 cm−2) and selectivity at low applied potential (0.15 V vs. Ag|AgCl), low detection limit (0.196 μM) and linear detection range (100 nM to 40 μM).

scholarly journals Solvothermal synthesis of Fe3O4 nanospheres for high-performance electrochemical non-enzymatic glucose sensor

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Jiasheng Xu ◽  
Yuting Sun ◽  
Jie Zhang
Keyword(s):  
Active Sites ◽  
High Performance ◽  
Glucose Sensor ◽  
Limit Of Detection ◽  
Glucose Monitoring ◽  
High Sensitivity ◽  
Blood Glucose Monitoring ◽  
Glucose Detection ◽  
Uniform Size ◽  
Long Term Stability

Abstract Ferroferric oxide (Fe3O4) nanospheres have been synthesized via a facile solvothermal procedure to serve as an electrode material for high performance non-enzymatic glucose sensor. The as-synthesized Fe3O4 nanospheres with a uniform size from 16 to 18 nm, which can increase the reaction contact area and the active sites in the process of glucose detection. Benefiting from the particular nanoscale structure, the Fe3O4 nanospheres obviously enhanced the activity of electrocatalytic oxidation towards glucose. When the Fe3O4 nanospheres material was used for non-enzymatic glucose sensor, several electrochemical properties including the high sensitivity 6560 μA mM−1 cm−2 (0.1–1.1 mM), limit of detection 33 μM (S/N = 3) and good long-term stability were well demonstrated. Furthermore, Fe3O4 nanospheres electrode confirmed the excellent performance of selectivity in glucose detection with the interfering substances existed such as urea, citric acid, ascorbic acid, and NaCl. Due to the excellent electrocatalytic activity in alkaline solution, the Fe3O4 nanospheres material can be considered as a promising candidate in blood glucose monitoring.

scholarly journals Solid contact Zn2+ -selective electrode with low detection limit and stable and reversible potential

2014 ◽  
Vol 12 (3) ◽  
pp. 354-364 ◽  
Author(s):  
Cecylia Wardak
Keyword(s):  
Ionic Liquid ◽  
Detection Limit ◽  
Response Time ◽  
Tap Water ◽  
Direct Determination ◽  
Fast Response ◽  
Indicator Electrode ◽  
Solid Contact ◽  
Internal Reference ◽  
Fast Response Time

AbstractA new solid contact Zn2+ polyvinylchloride membrane sensor with 2-(2-Hydroxy-1-naphthylazo)-1,3,4 -thiadiazole as an ionophore has been prepared. For the electrode construction, ionic liquids, alkylmethylimidazolium chlorides are used as transducer media and as a lipophilic ionic membrane component. The addition of ionic liquid to the membrane phase was found to reduce membrane resistance and determine the potential of an internal reference Ag/AgCl electrode. The electrode with the membrane composition: ionophore: PVC: o-NPOE: ionic liquid in the percentage ratio of (wt.) 1:30:66:3, respectively, exhibited the best performance, having a slope of 29.8 mV decade−1 in the concentration range 3×10−7–1×10−1 M. The detection limit is 6.9×10−8 M. It has a fast response time of 5–7 s and exhibits stable and reproducible potential. It has a fast response time of 5–7 s and exhibits stable and reproducible potential, which does not depend on pH in the range 3.8–8.0. The proposed sensor shows a good and satisfactory selectivity towards Zn2+ ion in comparison with other cations including alkali, alkaline earth, transition and heavy metal ions. It was successfully applied for direct determination of zinc ions in tap water and as an indicator electrode in potentiometric titration of Zn2+ ions with EDTA.

Sign in / Sign up

Export Citation Format

Share Document