Pyrylium-mediated transformations of natural products. Part 9. The effect of temperature and ionic strength on the mechanism and rate of reactions of pyridinium ions in aqueous solution

Author(s):  
Alan R. Katritzky ◽  
Taher I. Yousaf
2020 ◽  
Vol 17 (1(Suppl.)) ◽  
pp. 0295
Author(s):  
Souad Abd Mousa

            In this work, the adsorption of crystal violet dye from aqueous solution on charcoal and rice husk has been investigated, where the impact of variable factors (contact time; the dosage of adsorbent, pH, temperature, and ionic strength) have been studied. It has been found that charcoal and rice husk have an appropriate adsorption limit with regards to the expulsion of crystal violet dye from fluid arrangements. The harmony adsorption is for all intents and purposes accomplished in 45 min for charcoal and 60 min for rice husk. The amount of crystal violet dye adsorbed (0.4 g of charcoal and 0.5 g of rice husk) increased with an increasing pH and the value of 11 is the best. The effect of temperature on the adsorption process was studied at the range (298-323) K. The test comes about were broken down by utilizing Freundlich and Tempkin isotherm models, where the Freundlich and Tempkin factors were determined, and it has been found that the adsorption isotherm obey the Freundlich isotherm. The effect of ionic strength on the adsorption process was studied also via sodium chloride electrolyte solution; the results have been revaled that the sodium ion has a positive impact on the adsorption process. The thermodynamic parameters are shown estimated as ∆H values were 2.8012 kJ mol-1 and 5.8252 kJ mol-1 for charcoal and rice husk, respectively; this behavior referred to endothermic adsorption.


2003 ◽  
Vol 68 (8) ◽  
pp. 1407-1419 ◽  
Author(s):  
Claudio Fontanesi ◽  
Roberto Andreoli ◽  
Luca Benedetti ◽  
Roberto Giovanardi ◽  
Paolo Ferrarini

The kinetics of the liquid-like → solid-like 2D phase transition of adenine adsorbed at the Hg/aqueous solution interface is studied. Attention is focused on the effect of temperature on the rate of phase change; an increase in temperature is found to cause a decrease of transition rate.


2003 ◽  
Vol 07 (03) ◽  
pp. 139-146 ◽  
Author(s):  
Peter Hambright ◽  
Ines Batinić-Haberle ◽  
Ivan Spasojević

The relative reactivities of the tetrakis( N -alkylpyridinium- X - yl )-porphyrins where X = 4 (alkyl = methyl, ethyl, n -propyl) , X = 3 (methyl) , and X = 2 (methyl, ethyl, n -propyl, n -butyl, n -hexyl, n -octyl) were studied in aqueous solution. From the ionic strength dependence of the metalation rate constants, the effective charge of a particular cationic porphyrin was usually larger when copper(II) rather than zinc(II) was the reactant. The kinetics of ZnOH + incorporation and the acid catalyzed removal of zinc from the porphyrins in 1.0 M HCl were also studied. In general, the more basic 4- (para-) and 3- (meta-) isomers were the most reactive, followed by the less basic 2- (ortho-) methyl to n -butyl derivatives, with the lipophilic ortho n -hexyl and n -octyl porphyrins the least reactive.


2001 ◽  
Vol 79 (4) ◽  
pp. 370-376 ◽  
Author(s):  
Catherine Morlay ◽  
Yolande Mouginot ◽  
Monique Cromer ◽  
Olivier Vittori

The possible removal of copper(II), nickel(II), or lead(II) by an insoluble crosslinked poly(acrylic acid) was investigated in dilute aqueous solution. The binding properties of the polymer were examined at pH = 6.0 or 4.0 with an ionic strength of the medium µ = 0.1 or 1.0 M (NaNO3) using differential pulse polarography as an investigation means. The highest complexing capacity of the polyacid was obtained with lead(II) at pH = 6.0 with µ = 0.1 M, 4.8 mmol Pb(II)/g polymer. The conditional stability constants of the complex species formed were determined using the method proposed by Ruzic assuming that only the 1:1 complex species was formed; for lead(II) at pH = 6.0 and µ = 0.1 M, log K' = 5.3 ± 0.2. It appeared that the binding properties of the polymer increased, depending on the metal ion, in the following order: Ni(II) < Cu(II) < Pb(II). The complexing capacity and log K' values decreased with the pH or with an increase of the ionic strength. These results were in agreement with the conclusions of our previous studies of the hydrosoluble linear analogues. Finally, with the insoluble polymer, the log K' values were comparable to those previously obtained with the linear analogue whereas the complexing capacity values expressed in mmol g-1 were slightly lower.Key words: insoluble crosslinked poly(acrylic acid), copper(II), nickel(II), and lead(II) complexation.


1980 ◽  
Vol 35 (9) ◽  
pp. 1096-1103 ◽  
Author(s):  
Matthias Kretschmer ◽  
Lutwin Labouvie ◽  
Karl-W. Quirin ◽  
Helmut Wiehn ◽  
Ludwig Heck

Acidity constants of ammine complexes of tetravalent platinum in aqueous solutions have been determined by a spectrophotometric method at very low ionic strengths and extrapolated to zero ionic strength. Temperature variations of pK-values (25 °C and 50 °C) yield thermodynamic parameters for two successive deprotonation steps of hexaammineplatinum(IV), pentaamminechloroplatinum(IV), and tris(ethylenediamine)pla- tinum(IV) complexes and for the deprotonation of pentaammineaquacobalt(III) ion.The enthalpy changes for the first and second steps are similar and range from 50 to 75 kJ/mole while for the aqua ligand of Co(III) 33 kJ/mole are found. The very large dif­ference in the entropy changes (about 70 to 80 J/K mole for the first step and -10 to + 20 J/K mole for the second step) is interpreted by a model of solvation change. The primary hydration sphere of strongly oriented and immobilized water dipoles around the highly charged complex cation is transformed to a hydrogen-bonded solvation sheath when the electric field of the complex is weakened upon release of the first proton.


1973 ◽  
Vol 95 (11) ◽  
pp. 3811-3812 ◽  
Author(s):  
R. W. Taft ◽  
M. Taagepera ◽  
K. D. Summerhays ◽  
J. Mitsky

Biochemistry ◽  
1975 ◽  
Vol 14 (19) ◽  
pp. 4286-4291 ◽  
Author(s):  
Kim Hock Tan ◽  
Steven Keresztes-Nagy ◽  
Allen Frankfater

Sign in / Sign up

Export Citation Format

Share Document