Fundamental operation and design of high-frequency high-efficiency tuned power oscillator

2016 ◽  
pp. 245-266
Author(s):  
Hiroo Sekiya Sekiya
Keyword(s):  
High Frequency ◽  
High Efficiency ◽  
Fundamental Operation ◽  
Power Oscillator

Method of high frequency therapy at cows' mastitis during machine milking

2020 ◽  
pp. 9-12
Author(s):  
Viktor E. Lyubimov ◽  
Keyword(s):  
Dairy Cows ◽  
Electromagnetic Fields ◽  
High Frequency ◽  
High Efficiency ◽  
Environmentally Friendly ◽  
Ultrahigh Frequency ◽  
Machine Milking ◽  
High Frequency Electromagnetic Field ◽  
Milking Machine ◽  
Methods Of Treatment

Health of dairy cows ensures human health, so it is important that dairy products do not contain antibiotics that are used to treat any inflammation, including mastitis. In Russia at present, the problem of mastitis in cows exists with both attached and loose housing of cows. Mastitis of dairy cows are the great problem in milking husbandry. Losses from mastitis in milk yield can reach 15-20%. The main reasons for the occurrence of nonspecific mastitis of cows are the shortcomings of the working components of the milking machine: the degree of deterioration of the nipple rubber and the violation of machine milking technology (the reduction in pre-milking time and vacuum fluctuations account for 70% of all causes). Treatment of mastitis with antibiotics is effective, but not environmentally friendly and unacceptable. For the treatment of inflammation of the udder, it is necessary to use more environmentally friendly methods of treatment, one of which is the exposure to ultra-high frequency electromagnetic field tested by medicine. Use of three types of medical-mobile milking machines with the same method of exposure to ultrahigh-frequency electromagnetic fields on cow's nipples through electrodes in milking cups: LPDA-1-UHF, LPDA-2-UHF and LPDA-UHF-30 M, is described in the article. Author proved that cows with subclinical forms of mastitis recovered faster during milking with exposure to the ultrahigh frequency than when treated by antibiotics, and milking with the ultrahigh frequency device helps to recover 82% of the affected quarters with clinical forms and 100% of cows with subclinical forms of mastitis or with udder irritation. The high efficiency of the method of exposure to electromagnetic fields of the ultrahigh frequency during machine milking by means of medical-mobile milking machines LPDA-UHF for the prevention and treatment of mastitis of cows was shown.

The Design of 5V/100W High Frequency Switching Power Supply

2013 ◽  
Vol 834-836 ◽  
pp. 1221-1224
Author(s):  
Hong Zhuan Cai ◽  
Li Bai
Keyword(s):  
Power Supply ◽  
High Frequency ◽  
High Efficiency ◽  
Design Method ◽  
Switching Power Supply ◽  
Widespread Application ◽  
Forward Converter ◽  
Switching Power ◽  
Dc Power ◽  
Important Field

Switching power supply is an important field of application of power electronic technology, the high frequency switching DC power supply with high efficiency, small size, light weight and other advantages obtain the widespread application. The application of synchronous rectifier technology, photoelectric coupling isolation technology and the active clamp forward converter design high frequency switching power supply with 16~40V DC input and 5V/100W DC output . its operational principle is analyzed, and using LM5026 control chip describes design method of switching power supply.

High Power-Density High-Efficiency Electric Drive Design with Halbach-Rotor PMSM and WBG-Based High-Frequency Inverter

2021 ◽  
Author(s):  
Tenghui Dong ◽  
Jaedon Kwak ◽  
Liangliang Wei ◽  
Alberto Castellazzi ◽  
Taketsune Nakamura
Keyword(s):  
Power Density ◽  
Electric Drive ◽  
High Power ◽  
High Frequency ◽  
High Efficiency ◽  
High Power Density ◽  
Frequency Inverter

scholarly journals An Ultra-High Frequency Vibration-Based Fatigue Test and Its Comparative Study of a Titanium Alloy in the VHCF Regime

Metals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1415
Author(s):  
Wei Xu ◽  
Yanguang Zhao ◽  
Xin Chen ◽  
Bin Zhong ◽  
Huichen Yu ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Fatigue Test ◽  
High Frequency ◽  
High Efficiency ◽  
Fatigue Tests ◽  
Loading Frequency ◽  
Fatigue Specimen ◽  
Ultra High Frequency ◽  
High Frequency Vibration ◽  
Testing Data

This paper proposes an ultra-high frequency (UHF) fatigue test of a titanium alloy TA11 based on electrodynamic shaker in order to develop a feasible testing method in the VHCF regime. Firstly, a type of UHF fatigue specimen is designed to make its actual testing frequency reach as high as 1756 Hz. Then the influences of the loading frequency and loading types on the testing results are considered separately, and a series of comparative fatigue tests are hence conducted. The results show the testing data from the present UHF fatigue specimen agree well with those from the conventional vibration fatigue specimen with the loading frequency of 240 Hz. Furthermore, the present UHF testing data show good consistency with those from the axial-loading fatigue and rotating bending fatigue tests. But the obtained fatigue life from ultrasonic fatigue test with the loading frequency of 20 kHz is significantly higher than all other fatigue test results. Thus the proposed ultra-high frequency vibration-based fatigue test shows a balance of high efficiency and similarity with the conventional testing results.

Synthesis of powder metallurgy Ti-3Fe-2Al alloy using high-frequency induction heating

2019 ◽  
Vol 34 (01n03) ◽  
pp. 2040031
Author(s):  
Stella Raynova ◽  
Khaled Alsharedah ◽  
Fei Yang ◽  
Leandro Bolzoni
Keyword(s):  
Mechanical Properties ◽  
Powder Metallurgy ◽  
Induction Heating ◽  
High Frequency ◽  
High Efficiency ◽  
High Vacuum ◽  
Residual Porosity ◽  
Effect Of Temperature ◽  
Vacuum Furnace ◽  
High Frequency Induction

A powder metallurgy approach was applied for the synthesis of an [Formula: see text] Ti-2Al-3Fe alloy. Blends of the elemental Ti, Al and Fe powders were compacted and subsequently sintered. High-frequency induction heating (HFIH) instead of conventional high-vacuum furnace heating was used for the sintering, due to its high efficiency. The effect of temperature on the level of densification, residual porosity and mechanical properties was studied. Electron dispersive spectrum analysis was used to study the dissolution and homogenization of the alloying elements. The results showed that a short induction sintering (IS) cycle in the range of 10–15 min is sufficient to achieve significant powder consolidation, evident by the increase of the density and mechanical properties. The residual porosity diminishes with the increase of the sintering temperature. Full dissolution of the alloying powders is completed after sintering at temperatures above those of [Formula: see text]- to [Formula: see text]-phase transformation.

scholarly journals FTP: An Approximate Fast Privacy-Preserving Equality Test Protocol for Authentication in Internet of Things

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Youwen Zhu ◽  
Yue Zhang ◽  
Jiabin Yuan ◽  
Xianmin Wang
Keyword(s):  
Internet Of Things ◽  
High Efficiency ◽  
Privacy Preserving ◽  
Fundamental Operation ◽  
Test Protocol ◽  
Simulation Experiments ◽  
Iot Applications ◽  
Running Cost ◽  
The Cost ◽  
Equality Test

Privacy-preserving string equality test is a fundamental operation of many algorithms, including privacy-preserving authentication in Internet of Things (IoT). Existing secure equality test schemes can theoretically achieve string equality comparison and preserve the private strings. However, they suffer from heavy computation and communication cost, especially while the strings are of hundreds of bits or longer, which is not suitable for IoT applications. In this paper, we propose an approximate  Fast privacy-preserving equality  Test  Protocol (FTP), which can securely complete string equality test and achieve high running efficiency at the cost of little accuracy loss. We strictly analyze the accuracy of our proposed scheme and formally prove its security. Additionally, we leverage extensive simulation experiments to evaluate the running cost, which confirms our high efficiency; for instance, our proposed FTP can securely compare two 256-bit strings within 0.7 seconds on ordinary laptops.

Sign in / Sign up

Export Citation Format

Share Document