scholarly journals Na I and Hα absorption features in the atmosphere of MASCARA-2b/KELT-20b

2018 ◽  
Vol 616 ◽  
pp. A151 ◽  
Author(s):  
N. Casasayas-Barris ◽  
E. Pallé ◽  
F. Yan ◽  
G. Chen ◽  
S. Albrecht ◽  
...  
Keyword(s):  
Transmission Spectrum ◽  
Signal To Noise Ratio ◽  
Atmospheric Temperature ◽  
Light Curves ◽  
Spectral Features ◽  
Atomic Sodium ◽  
Atmospheric Temperature Profile ◽  
Balmer Lines ◽  
Absorption Features

We used the HARPS-North high resolution spectrograph (ℛ = 115 000) at Telescopio Nazionale Galileo (TNG) to observe one transit of the highly irradiated planet MASCARA-2b/KELT-20b. Using only one transit observation, we are able to clearly resolve the spectral features of the atomic sodium (Na I) doublet and the Hα line in its atmosphere, which are corroborated with the transmission calculated from their respective transmission light curves (TLC). In particular, we resolve two spectral features centered on the Na I doublet position with an averaged absorption depth of 0.17 ± 0.03% for a 0.75 Å bandwidth with line contrasts of 0.44 ± 0.11% (D2) and 0.37 ± 0.08% (D1). The Na I TLC have also been computed, showing a large Rossiter-McLaughlin (RM) effect, which has a 0.20 ± 0.05% Na I transit absorption for a 0.75 Å passband that is consistent with the absorption depth value measured from the final transmission spectrum. We observe a second feature centered on the Hα line with 0.6 ± 0.1% contrast and an absorption depth of 0.59 ± 0.08% for a 0.75 Å passband that has consistent absorptions in its TLC, which corresponds to an effective radius of Rλ/RP = 1.20 ± 0.04. While the signal-to-noise ratio (S/N) of the final transmission spectrum is not sufficient to adjust different temperature profiles to the lines, we find that higher temperatures than the equilibrium (Teq = 2260 ± 50 K) are needed to explain the lines contrast. Particularly, we find that the Na I lines core require a temperature of T = 4210 ± 180 K and that Hα requires a temperature of T = 4330 ± 520 K. MASCARA-2b, like other planets orbiting A-type stars, receives a large amount of UV energy from its host star. This energy excites the atomic hydrogen and produces Hα absorption, leading to the expansion and abrasion of the atmosphere. The study of other Balmer lines in the transmission spectrum would allow the determination of the atmospheric temperature profile and the calculation of the lifetime of the atmosphere with escape rate measurements. In the case of MASCARA-2b, residual features are observed in the Hβ and Hγ lines, but they are not statistically significant. More transit observations are needed to confirm our findings in Na I and Hα and to build up enough S/N to explore the presence of Hβ and Hγ planetary absorptions.

scholarly journals The atmosphere of WASP-17b: Optical high-resolution transmission spectroscopy

2018 ◽  
Vol 618 ◽  
pp. A98 ◽  
Author(s):  
Sara Khalafinejad ◽  
Michael Salz ◽  
Patricio E. Cubillos ◽  
George Zhou ◽  
Carolina von Essen ◽  
...  
Keyword(s):  
High Resolution ◽  
Light Curve ◽  
Physical Properties ◽  
Transmission Spectrum ◽  
Atmospheric Model ◽  
Atmospheric Temperature ◽  
Temporal Variations ◽  
Light Curves ◽  
Sodium Absorption ◽  
Transmission Spectroscopy

High-resolution transmission spectroscopy is a method for understanding the chemical and physical properties of upper exoplanetary atmospheres. Due to large absorption cross-sections, resonance lines of atomic sodium D-lines (at 5889.95 and 5895.92 Å) produce large transmission signals. Our aim is to unveil the physical properties of WASP-17b through an accurate measurement of the sodium absorption in the transmission spectrum. We analyze 37 high-resolution spectra observed during a single transit of WASP-17b with the MIKE instrument on the 6.5 m Magellan Telescopes. We exclude stellar flaring activity during the observations by analyzing the temporal variations of Hα and Ca II infrared triplet (IRT) lines. We then obtain the excess absorption light curves in wavelength bands of 0.75, 1, 1.5, and 3 Å around the center of each sodium line (i.e., the light curve approach). We model the effects of differential limb-darkening, and the changing planetary radial velocity on the light curves. We also analyze the sodium absorption directly in the transmission spectrum, which is obtained by dividing in-transit by out-of-transit spectra (i.e., the division approach). We then compare our measurements with a radiative transfer atmospheric model. Our analysis results in a tentative detection of exoplanetary sodium: we measure the width and amplitude of the exoplanetary sodium feature to be σNa = (0.128 ± 0.078) Å and ANa = (1.7 ± 0.9)% in the excess light curve approach and σNa = (0.850 ± 0.034) Å and ANa = (1.3 ± 0.6)% in the division approach. By comparing our measurements with a simple atmospheric model, we retrieve an atmospheric temperature of 15501550 −200+700 K and radius (at 0.1 bar) of 1.81 ± 0.02 RJup for WASP-17b.

Revisiting the atmosphere of HD 209458b with HARPS-N, CARMENES and ESPRESSO

2020 ◽  
Author(s):  
Núria Casasayas-Barris ◽  
Enric Palle ◽  
Monika Stangret ◽  
Guo Chen ◽  
Fei Yan ◽  
...  
Keyword(s):  
High Resolution ◽  
Time Evolution ◽  
Transmission Spectrum ◽  
State Of The Art ◽  
Signal To Noise Ratio ◽  
Light Curves ◽  
High Resolution Spectroscopy ◽  
Transmission Spectra ◽  
Signal To Noise ◽  
Transmission Spectroscopy

<p>HD 209458b was the first transiting planet discovered, and the first for which its atmosphere, in particular Na I, was detected. With time, it has become one of the most studied planets, with a large diversity of atmospheric studies using low- and high-resolution spectroscopy. Here, we present the analysis of high-resolution transmission spectroscopy of HD 209458b using a total of five transit observations with HARPS-N and CARMENES spectrographs. In contrast to previous studies where atmospheric Na I absorption is detected, we find that, for all of the nights, either individually or combined, the transmission spectra can be explained by the combination of the centre-to-limb variation and the Rossiter-McLaughlin effect. Thus, the transmission spectrum reveals no detectable Na I absorption in HD 209458b. This is also observed in the time-evolution maps and transmission light curves, but at lower signal-to-noise ratio. Other strong lines such as Hα, Ca II IRT, the Mg I triplet region, and K I D1 are analysed, and are also consistent with the modelled effects, without considering any contribution from the exoplanet atmosphere. New ESPRESSO observations, with state-of-the-art stability and considerably larger signal-to-noise, confirm the results of our study and will also be shown.</p>

Distance to SN 1987A and the LMC

1999 ◽  
Vol 190 ◽  
pp. 549-554
Author(s):  
Nino Panagia
Keyword(s):  
Angular Size ◽  
Large Magellanic Cloud ◽  
Magellanic Cloud ◽  
Light Curves ◽  
Distance Modulus ◽  
Absolute Size ◽  
Sn 1987A

Using the new reductions of the IUE light curves by Sonneborn et al. (1997) and an extensive set of HST images of SN 1987A we have repeated and improved Panagia et al. (1991) analysis to obtain a better determination of the distance to the supernova. In this way we have derived an absolute size of the ringRabs= (6.23 ± 0.08) x 1017cm and an angular sizeR″ = 808 ± 17 mas, which give a distance to the supernovad(SN1987A) = 51.4 ± 1.2 kpc and a distance modulusm–M(SN1987A) = 18.55 ± 0.05. Allowing for a displacement of SN 1987A position relative to the LMC center, the distance to the barycenter of the Large Magellanic Cloud is also estimated to bed(LMC) = 52.0±1.3 kpc, which corresponds to a distance modulus ofm–M(LMC) = 18.58±0.05.

Determination of the Best Emulsion for the Microscopy of Crystals

1981 ◽  
Vol 39 ◽  
pp. 32-33
Author(s):  
David A. Grano ◽  
Kenneth H. Downing
Keyword(s):  
Spatial Frequency ◽  
Information Transfer ◽  
Signal To Noise Ratio ◽  
Experimental Situation ◽  
Photographic Emulsion ◽  
Modulation Transfer ◽  
Signal To Noise ◽  
Frequency Space ◽  
Noise Ratio

The retrieval of high-resolution information from images of biological crystals depends, in part, on the use of the correct photographic emulsion. We have been investigating the information transfer properties of twelve emulsions with a view toward 1) characterizing the emulsions by a few, measurable quantities, and 2) identifying the “best” emulsion of those we have studied for use in any given experimental situation. Because our interests lie in the examination of crystalline specimens, we've chosen to evaluate an emulsion's signal-to-noise ratio (SNR) as a function of spatial frequency and use this as our critereon for determining the best emulsion.The signal-to-noise ratio in frequency space depends on several factors. First, the signal depends on the speed of the emulsion and its modulation transfer function (MTF). By procedures outlined in, MTF's have been found for all the emulsions tested and can be fit by an analytic expression 1/(1+(S/S0)2). Figure 1 shows the experimental data and fitted curve for an emulsion with a better than average MTF. A single parameter, the spatial frequency at which the transfer falls to 50% (S0), characterizes this curve.

Computer-Assisted High-Re Solution TEM

1990 ◽  
Vol 48 (1) ◽  
pp. 162-163
Author(s):  
F.A. Ponce ◽  
H. Hikashi
Keyword(s):  
Signal To Noise Ratio ◽  
Accurate Determination ◽  
Computer Software ◽  
Video Camera ◽  
Image Contrast ◽  
Objective Lens ◽  
Computer Assisted ◽  
Optical Parameters ◽  
Astigmatism Correction

The determination of the atomic positions from HRTEM micrographs is only possible if the optical parameters are known to a certain accuracy, and reliable through-focus series are available to match the experimental images with calculated images of possible atomic models. The main limitation in interpreting images at the atomic level is the knowledge of the optical parameters such as beam alignment, astigmatism correction and defocus value. Under ordinary conditions, the uncertainty in these values is sufficiently large to prevent the accurate determination of the atomic positions. Therefore, in order to achieve the resolution power of the microscope (under 0.2nm) it is necessary to take extraordinary measures. The use of on line computers has been proposed [e.g.: 2-5] and used with certain amount of success.We have built a system that can perform operations in the range of one frame stored and analyzed per second. A schematic diagram of the system is shown in figure 1. A JEOL 4000EX microscope equipped with an external computer interface is directly linked to a SUN-3 computer. All electrical parameters in the microscope can be changed via this interface by the use of a set of commands. The image is received from a video camera. A commercial image processor improves the signal-to-noise ratio by recursively averaging with a time constant, usually set at 0.25 sec. The computer software is based on a multi-window system and is entirely mouse-driven. All operations can be performed by clicking the mouse on the appropiate windows and buttons. This capability leads to extreme friendliness, ease of operation, and high operator speeds. Image analysis can be done in various ways. Here, we have measured the image contrast and used it to optimize certain parameters. The system is designed to have instant access to: (a) x- and y- alignment coils, (b) x- and y- astigmatism correction coils, and (c) objective lens current. The algorithm is shown in figure 2. Figure 3 shows an example taken from a thin CdTe crystal. The image contrast is displayed for changing objective lens current (defocus value). The display is calibrated in angstroms. Images are stored on the disk and are accessible by clicking the data points in the graph. Some of the frame-store images are displayed in Fig. 4.

scholarly journals The Double Face of Ketamine—The Possibility of Its Identification in Blood and Beverages

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 813
Author(s):  
Magdalena Świądro ◽  
Paweł Stelmaszczyk ◽  
Irena Lenart ◽  
Renata Wietecha-Posłuszny
Keyword(s):  
Date Rape ◽  
Signal To Noise Ratio ◽  
High Sensitivity ◽  
Heroin Addiction ◽  
Assisted Extraction ◽  
Low Concentrations ◽  
High Concentrations ◽  
Rosé Wine ◽  
Tof Ms

The purpose of this study was to develop and validate a high-sensitivity methodology for identifying one of the most used drugs—ketamine. Ketamine is used medicinally to treat depression, alcoholism, and heroin addiction. Moreover, ketamine is the main ingredient used in so-called “date-rape” pills (DRP). This study presents a novel methodology for the simultaneous determination of ketamine based on the Dried Blood Spot (DBS) method, in combination with capillary electrophoresis coupled with a mass spectrometer (CE-TOF-MS). Then, 6-mm circles were punched out from DBS collected on Whatman DMPK-C paper and extracted using microwave-assisted extraction (MAE). The assay was linear in the range of 25–300 ng/mL. Values of limits of detection (LOD = 6.0 ng/mL) and quantification (LOQ = 19.8 ng/mL) were determined based on the signal to noise ratio. Intra-day precision at each determined concentration level was in the range of 6.1–11.1%, and inter-day between 7.9–13.1%. The obtained precision was under 15.0% (for medium and high concentrations) and lower than 20.0% (for low concentrations), which are in accordance with acceptance criteria. Therefore, the DBS/MAE/CE-TOF-MS method was successfully checked for analysis of ketamine in matrices other than blood, i.e., rose wine and orange juice. Moreover, it is possible to identify ketamine in the presence of flunitrazepam, which is the other most popular ingredient used in DRP. Based on this information, the selectivity of the proposed methodology for identifying ketamine in the presence of other components of rape pills was checked.

scholarly journals New Data on the Eclipsing Binary V1848 Ori and Improved Orbital and Light Curve Solutions

2020 ◽  
Vol 29 (1) ◽  
pp. 72-80 ◽  
Author(s):  
Fatemeh Davoudi ◽  
Atila Poro ◽  
Fahri Alicavus ◽  
Afshin Halavati ◽  
Saeed Doostmohammadi ◽  
...  
Keyword(s):  
Binary System ◽  
Light Curve ◽  
Mass Function ◽  
Light Curves ◽  
Complete Analysis ◽  
Physical Parameters ◽  
Mass Ratio ◽  
Third Body ◽  
Eclipsing Binary

AbstractNew observations of the eclipsing binary system V1848 Ori were carried out using the V filter resulting in a determination of new times of minima and new ephemeris were obtained. We presented the first complete analysis of the system’s orbital period behavior and analysis of O-C diagram done by the GA and MCMC approaches in OCFit code. The O-C diagram demonstrates a sinusoidal trend in the data; this trend suggests a cyclic change caused by the LITE effect with a period of 10.57 years and an amplitude of 7.182 minutes. It appears that there is a third body with mass function of f (m3) = 0.0058 M⊙ in this binary system. The light curves were analyzed using the Wilson-Devinney code to determine some geometrical and physical parameters of the system. These results show that V1848 Ori is a contact W UMa binary system with the mass ratio of q = 0.76 and a weak fillout factor of 5.8%. The O’Connell effect was not seen in the light curve and there is no need to add spot.

Sign in / Sign up

Export Citation Format

Share Document