scholarly journals Laboratory and Field Investigation of the Feasibility of Crumb Rubber Waste Application to Improve the Flexibility of Anti-Rutting Performance of Asphalt Pavement

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1738 ◽  
Author(s):  
Hongyin Li ◽  
Hailong Jiang ◽  
Wenwu Zhang ◽  
Peng Liu ◽  
Shanshan Wang ◽  
...  
Keyword(s):  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Field Investigation ◽  
Compression Tests ◽  
Modified Asphalt ◽  
Asphalt Mix ◽  
Low Temperature Cracking ◽  
Indirect Tensile

Resistance of asphalt mix to low-temperature cracking and rutting at high temperature is very important to ensure the service performance of asphalt pavement under seasonal changes in temperature and loading. However, it is challenging to balance the improvement of such resistance by using additives, e.g., anti-rutting agent (ARA). This study focuses on improving the flexibility of anti-rutting asphalt mix by incorporating crumb rubber (CR) and ARA. The properties of the prepared modified asphalt mix were evaluated in the laboratory by performing wheel tracking, three-point bending, indirect tensile, and uniaxial compression tests. The experimental results showed that the dynamic stability of modified asphalt mix was significantly increased due to the addition of ARA and further improved by incorporating CR. The maximum bending strain at −10 °C was increased due to the contribution of CR. The results of indirect tensile strength and resilient modulus further indicated that the CR-modified anti-rutting mixture was more flexible. Moreover, the field observation and evaluation indicated that the CR-modified anti-rutting asphalt pavement met the standard requirements, better than normal asphalt mixture in many parameters. A conclusion can be made that incorporating CR in asphalt mixture prepared with ARA can improve pavement performance at both high and low in-service temperatures.

scholarly journals MECHANICAL PERFORMANCE OF ASPHALT MIXTURE CONTAINING CUP LUMP RUBBER

2019 ◽  
Vol 81 (6) ◽  
Author(s):  
Norfazira Mohd Azahar ◽  
Norhidayah Abdul Hassan ◽  
Ramadhansyah Putra Jaya ◽  
Hasanan Md. Nor ◽  
Mohd Khairul Idham Mohd Satar ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Resilient Modulus ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Dynamic Creep ◽  
Aging Conditions ◽  
Public Work Department ◽  
Indirect Tensile

The use of cup lump rubber as an additive in asphalt binder has recently become the main interest of the paving industry. The innovation helps to increase the natural rubber consumption and stabilize the rubber price. This study evaluates the mechanical performance of cup lump rubber modified asphalt (CMA) mixture in terms of resilient modulus, dynamic creep and indirect tensile strength under aging conditions. The CMA mixture was prepared using dense-graded Marshall-designed mix and the observed behavior was compared with that of conventional mixture. From the results, both mixtures passed the volumetric properties as accordance to Malaysian Public Work Department (PWD) specification. The addition of cup lump rubber provides better resistance against permanent deformation through the enhanced properties of resilient modulus and dynamic creep. Furthermore, the resilient modulus of CMA mixture performed better under aging conditions.  

scholarly journals Rutting and Fatigue Performance Evaluation of Qingchuan Rock Modified Asphalt Mixture

2016 ◽  
Vol 10 (1) ◽  
pp. 511-523 ◽  
Author(s):  
Li Limin ◽  
He Zhaoyi ◽  
Liu Weidong ◽  
Hu Cheng ◽  
Liu Yang
Keyword(s):  
Fatigue Damage ◽  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Fatigue Performance ◽  
Raw Material ◽  
Loading Test ◽  
Modified Asphalt ◽  
Tensile Fatigue ◽  
Dynamic Creep

To solve the problem of rutting and fatigue damage to asphalt pavement, rutting and fatigue performances of Qingchuan rock asphalt modified asphalt were studied, based on the dynamic shear rheometer test, the dynamic creep test, the rutting test, the indirect tensile fatigue test, the small-sized acceleration loading test, the compressive resilient modulus test, the BISAR3.0 Program and the rutting calculation method based on dynamic finite element method. The results indicate that Qingchuan rock asphalt modifier can obviously improve the anti-fatigue performance and anti-rutting performance of asphalt pavement. Taking the anti-rutting performance and the raw-material price of asphalt into consideration, a rock asphalt optimum content ranging from 5% to 8% is suggested. Qingchuan rock asphalt is a good modifier to solve the rutting and the fatigue damage of asphalt pavement.

scholarly journals Effect of aging on the physical-mechanical characteristics of an asphalt mixture with rubber

2021 ◽  
Vol 2102 (1) ◽  
pp. 012020
Author(s):  
J G Bastidas-Martínez ◽  
J C Ruge ◽  
R A G Zuluaga ◽  
L Medina
Keyword(s):  
Mechanical Characteristics ◽  
Resilient Modulus ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Mix ◽  
Aging Conditions ◽  
Short And Long Term ◽  
Indirect Tensile ◽  
Recycled Rubber ◽  
Monotonic Loads

Abstract This paper evaluated the physical-mechanical characteristics of two asphalt mixtures. One mix with conventional asphalt and the other with asphalt modified with recycled rubber grain. For this purpose, the asphalt mix designs were made by means of the Marshall methodology. Subsequently, asphalt mixtures were manufactured to analyze the action of monotonic loads (indirect tensile strength) and dynamic loads (resilient modulus). Previously, each type of asphalt mix was subjected to short- and long-term aging conditions, following Aastho guidelines. It is concluded that the incorporation of recycled rubber grain makes the changes in mechanical properties with aging not very noticeable in relation to mixtures without this material.

Study on Low Temperature Performance of SBS Modified Asphalt and its Mixture

2014 ◽  
Vol 587-589 ◽  
pp. 1332-1336
Author(s):  
Jun Qing Chen ◽  
Ai Jun Li ◽  
Mei Qian Jin ◽  
Min Nan Zheng ◽  
Wan Yi Yang
Keyword(s):  
Tensile Strength ◽  
Low Temperature ◽  
Temperature Stress ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Low Temperature Cracking ◽  
Low Temperature Performance ◽  
Sbs Modified Asphalt

Prone to low temperature cracking of asphalt pavement problems in cold areas, testing BBR on 70# base asphalt and 4 kinds of different dosage of SBS modified asphalt, testing TSRST on their mixture to appraisal the low temperature performance of SBS modified asphalt mixture. Results show that compared with the temperature stress of internal cracks of base asphalt and SBS modified asphalt mixture not rise significantly. But the stress of SBS asphalt mixture growing slow and the temperature of cracking reduce obviously; it means the low temperature performance improved. This shows that SBS improves the toughness and reduced the modulus of asphalt mixture in low temperature, rather than increasing the tensile strength of mixture specimens.

scholarly journals Evaluation of Fatigue Life of CRM-Reinforced SMA and Its Relationship to Dynamic Stiffness

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Nuha Salim Mashaan ◽  
Mohamed Rehan Karim ◽  
Mahrez Abdel Aziz ◽  
Mohd Rasdan Ibrahim ◽  
Herda Yati Katman ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Fatigue Test ◽  
Resilient Modulus ◽  
Dynamic Stiffness ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Crumb Rubber ◽  
Fatigue Properties ◽  
Tensile Fatigue ◽  
Indirect Tensile

Fatigue cracking is an essential problem of asphalt concrete that contributes to pavement damage. Although stone matrix asphalt (SMA) has significantly provided resistance to rutting failure, its resistance to fatigue failure is yet to be fully addressed. The aim of this study is to evaluate the effect of crumb rubber modifier (CRM) on stiffness and fatigue properties of SMA mixtures at optimum binder content, using four different modification levels, namely, 6%, 8%, 10%, and 12% CRM by weight of the bitumen. The testing undertaken on the asphalt mix comprises the dynamic stiffness (indirect tensile test), dynamic creep (repeated load creep), and fatigue test (indirect tensile fatigue test) at temperature of 25°C. The indirect tensile fatigue test was conducted at three different stress levels (200, 300, and 400 kPa). Experimental results indicate that CRM-reinforced SMA mixtures exhibit significantly higher fatigue life compared to the mixtures without CRM. Further, higher correlation coefficient was obtained between the fatigue life and resilient modulus as compared to permanent strain; thus resilient modulus might be a more reliable indicator in evaluating the fatigue life of asphalt mixture.

Effect of Addition of Dry Crumb Rubber on the Performance of Terminal Blend Crumb Rubber Modified Asphalt Mixtures

2017 ◽  
Vol 2633 (1) ◽  
pp. 90-97 ◽  
Author(s):  
Salih Kocak ◽  
M. Emin Kutay
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Fine Aggregate ◽  
Dry Process ◽  
Modified Asphalt ◽  
Wet Process ◽  
Low Temperature Cracking ◽  
Linear Viscoelastic

Three major methods are used to produce crumb rubber modified asphalt pavement: the dry process (CRDry), the terminal blend process (CRTB), and the wet process (CRWet). Although the CRDry process replaces the portion of fine aggregate in the asphalt mixture with crumb rubber (CR) particles, the CRWet process incorporates CR particles into hot liquid asphalt before it is mixed with aggregates. CRTB is known as a special type of CRWet process in which the CR is blended with asphalt binder at the asphalt terminal. In general, the CRWet process can integrate 15% to 22% CR by weight of the binder. This amount ranges from 10% to 12% in the CRTB process as a result of the limitations associated with transportation and pumping. This study investigated the feasibility of increasing the CR content of CRTB modified asphalt mixtures. The addition to the mixture of about 0.5% CR (by weight of the mix) through the CRDry process doubled the amount of rubber to be found in a conventional CRTB mix. The relative performances of the CRTB and the CRTB+CRDry processes [i.e., crumb rubber hybrid (CRHY)] were investigated with respect to their linear viscoelastic properties, rutting susceptibility, moisture damage, resistance to fatigue, and low temperature cracking. It was shown that it was possible to increase the amount of CR in the mixture through the use of the CRHY method proposed here, without adverse effect on the performance of the mixture.

scholarly journals Laboratory Study on the Fatigue Resistance of Asphaltic Concrete Containing Titanium Dioxide

2018 ◽  
Vol 34 ◽  
pp. 01021
Author(s):  
Rosnawati Buhari ◽  
Mohd Ezree Abdullah ◽  
Mohd Khairul Ahmad ◽  
Saiful Azhar Tajudin ◽  
Siti Khatijah Abu Bakar
Keyword(s):  
Titanium Dioxide ◽  
Asphalt Mixture ◽  
Performance Testing ◽  
Fatigue Performance ◽  
Fatigue Properties ◽  
Modified Asphalt ◽  
Tensile Fatigue ◽  
Asphalt Mix ◽  
Rotational Viscosity ◽  
Indirect Tensile

This study aims to evaluate the fatigue performance of modified asphalt mixture using Indirect Tensile Fatigue Test. Titanium Dioxide (TiO2) powder in a form of rutile was used for producing asphalt concrete with lower mixing and compaction temperature compared to conventional hot mix asphalt without reducing its physical and mechanical also resistance to fatigue. The characteristic of the asphalt and modified asphalt was evaluated using penetration test, softening test and rotational viscosity test. Titanium dioxide of 2%, 4%, 6%, 8% and 10% by weight of asphalt has been incorporated into unaged 80/100 asphalt mix in order to improvise its performance and to fulfill the objectives of this experimental study. As a result, TiO2 as an additive is potential to decrease the penetration and increasing the softening point of the asphalt. In terms of fatigue performance testing, addition TiO2 additive does help in improving the fatigue properties as it shows greater result than the control asphalt. In conclusion, TiO2 is great in improving fatigue properties.

Study on Durability of Granulated Crumb Rubber Asphalt Pavement Based on TPS High-Viscosity Asphalt

2014 ◽  
Vol 587-589 ◽  
pp. 985-989 ◽  
Author(s):  
Yong Shou Yang ◽  
Qiang Dong
Keyword(s):  
Asphalt Pavement ◽  
Water Immersion ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
High Viscosity ◽  
Water Stability ◽  
Mineral Aggregate ◽  
Modified Asphalt ◽  
Adhesion Ability ◽  
Sbs Modified Asphalt

In order to improve the durability of granulated crumb rubber asphalt pavement, different amount of TPS modifier are added into granulated crumb rubber asphalt mixture to do tests of water-boiling, water immersion, immersing Marshall, cantabro immersion and some other indoor experiments. Through comparing with base asphalt and SBS modified asphalt, we found that the adhesion ability of asphalt and mineral aggregate and crumb rubber were granulated after adding TPS modifier. The water stability of granulated crumb rubber asphalt mixture is improved. The durability of granulated crumb rubber asphalt mixture has also been improved dramatically. In additions, the optimum mixing volume of TPS for granulated crumb rubber asphalt mixture is 12%; the mixing temperature of asphalt mixture is 185°C.

Laboratory characterization of recycled crumb-rubber-modified asphalt mixture after extended aging

2008 ◽  
Vol 35 (11) ◽  
pp. 1308-1317 ◽  
Author(s):  
Soon-Jae Lee ◽  
Hakseo Kim ◽  
Chandra K. Akisetty ◽  
Serji N. Amirkhanian
Keyword(s):  
Tensile Strength ◽  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Accelerated Aging ◽  
Crumb Rubber ◽  
Moisture Susceptibility ◽  
Testing Procedures ◽  
Laboratory Characterization ◽  
Significant Difference

This paper presents a limited study that characterizes the recycling of artificially aged crumb-rubber modified (CRM) mixtures depending on their recycling percentage and aggregate type. Eight mixtures [six recycled mixtures containing rubberized reclaimed asphalt pavement (RAP) and two control virgin mixtures] were designed and tested. Two types of aggregates were used in this research project. The rubberized RAP used in the study was artificially aged in the laboratory using an accelerated aging processes. The percentages of the RAP, by total weight of the mix, incorporated into the recycled mixtures were 15%, 25%, and 35%. Evaluation of all mixtures included the following testing procedures: tensile strength ratio (TSR), asphalt pavement analyzer (APA), resilient modulus, and indirect tensile strength (ITS) after long-term oven aging. The results from this study showed that (i) the recycled aged CRM mixtures (with 15%, 25%, and 35% rubberized RAP) can satisfy the current Superpave mixture requirements, including moisture susceptibility and rutting resistance, and (ii) in general, there was no significant difference between the control and the recycled CRM mixtures for the properties evaluated in this study.

scholarly journals Performance Evaluation of Crumb Rubber Modified Stone Mastic Asphalt Pavement in Malaysia

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Nuha Salim Mashaan ◽  
Asim H. Ali ◽  
Suhana Koting ◽  
Mohamed Rehan Karim
Keyword(s):  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Maximum Level ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Modified Asphalt ◽  
Mastic Asphalt ◽  
Stiffness Properties ◽  
Stone Mastic Asphalt ◽  
Pavement Distresses

To prevent pavement distresses there are various solutions such as adopting new mix designs or utilisation of asphalt additives. The primary aim of this study was to investigate the effect of adding crumb tyre rubber as an additive to SMA mixture performance properties. This study investigated the essential aspects of modified asphalt mixtures in order to better understand the influence of CRM modifiers on volumetric, mechanical, and stiffness properties of SMA mixture. In this study, virgin bitumen 80/100 penetration grade was used, modified with crumb rubber (CRM) at five different modification levels, namely, 6%, 12%, 16%, and 20%, respectively, by weight of the bitumen. The appropriate amount of the added CRM was found to be 12% by weight of bitumen. This percentage results in the maximum level of stability. The resilient modulus (Mr) of modified SMA samples including different percentages of CRM was obviously higher in comparison with that of unmodified samples.

Sign in / Sign up

Export Citation Format

Share Document