scholarly journals Greenhouse heating by using an installation of biomass gasification

2019 ◽  
Vol 112 ◽  
pp. 03026
Author(s):  
Evelin Laza ◽  
Liliana Dumitrescu ◽  
Madalina Boboc ◽  
Georgiana Moiceanu
Keyword(s):  
Conversion Efficiency ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Forest Biomass ◽  
Chemical Conversion ◽  
Biomass Gasification ◽  
Physical Processes ◽  
High Conversion Efficiency ◽  
Solid Liquid ◽  
Rapid Pyrolysis

The use of renewable energies has seen a significant increase in energy demand in agriculture, in competition with solid, liquid or gaseous fossil fuels. Wood and other forms of biomass including energy crops, agricultural and forest biomass are transformed into energy through thermal, biological or physical processes. Thermo-chemical conversion, biomass gasification, is the most attractive technology that offers a high conversion efficiency compared to direct burning or rapid pyrolysis.

Simulation of Biomass Gasification

2014 ◽  
Vol 592-594 ◽  
pp. 1771-1775
Author(s):  
R. Balaji ◽  
A. Govindaraj ◽  
C. Karthikeyan ◽  
A. Raghupathy
Keyword(s):  
Fossil Fuels ◽  
Chemical Conversion ◽  
Biomass Gasification ◽  
Comparative Performance ◽  
Modeling And Analysis ◽  
Energy Needs ◽  
Before And After ◽  
Potential Alternative ◽  
User Friendly ◽  
Drying Chamber

This paper deals with the modeling and analysis of drying of biomass in gasification. Biomass is a potential alternative for fossil fuels like coal, oil etc., to sustainably meet the increasing energy needs of the world. The different methods of conversion of biomass are anaerobic and thermo chemical conversion. Since, thermo chemical conversion is a reliable one we opted to choose it. The paper deals more with the analysis of the biomass drying and heat transfer towards the inlet air for combustion. The proposed work increases the efficiency of the drying chamber by increasing the temperature of the inlet air and also it analyses on increasing the effectiveness of the heat exchanger by changing the input values by simulation. Simulation is the initiation of the real world process or system overtime. It is also used with the scientific modeling of human system to gain insight. Here simulation is carried out using MATLAB. It is user friendly and adds real time values in coding.The results are plotted in the graph shows the comparative performance before and after preheating.

Biodiesel production from non-edible oils: A review

2020 ◽  
pp. 149-159
Author(s):  
Jatinder Kataria ◽  
Saroj Kumar Mohapatra ◽  
Amit Pal
Keyword(s):  
Environmental Impact ◽  
Energy Demand ◽  
Fossil Fuels ◽  
World Wide ◽  
Edible Oils ◽  
Control Measure ◽  
Biodiesel Production ◽  
Pollution Level ◽  
Animal Fats ◽  
The World

The limited fossil reserves, spiraling price and environmental impact due to usage of fossil fuels leads the world wide researchers’ interest in using alternative renewable and environment safe fuels that can meet the energy demand. Biodiesel is an emerging renewable alternative fuel to conventional diesel which can be produced from both edible and non-edible oils, animal fats, algae etc. The society is in dire need of using renewable fuels as an immediate control measure to mitigate the pollution level. In this work an attempt is made to review the requisite and access the capability of the biodiesel in improving the environmental degradation.

BP Global Energy Outlook 2030

2013 ◽  
pp. 109-128 ◽  
Author(s):  
C. Rühl
Keyword(s):  
Emerging Economies ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Net Energy ◽  
Global Energy ◽  
The Past ◽  
Market Shares ◽  
The Us ◽  
Almost All ◽  
Oil Gas

This paper presents the highlights of the third annual edition of the BP Energy Outlook, which sets out BP’s view of the most likely developments in global energy markets to 2030, based on up-to-date analysis and taking into account developments of the past year. The Outlook’s overall expectation for growth in global energy demand is to be 36% higher in 2030 than in 2011 and almost all the growth coming from emerging economies. It also reflects shifting expectations of the pattern of supply, with unconventional sources — shale gas and tight oil together with heavy oil and biofuels — playing an increasingly important role and, in particular, transforming the energy balance of the US. While the fuel mix is evolving, fossil fuels will continue to be dominant. Oil, gas and coal are expected to converge on market shares of around 26—28% each by 2030, and non-fossil fuels — nuclear, hydro and renewables — on a share of around 6—7% each. By 2030, increasing production and moderating demand will result in the US being 99% self-sufficient in net energy. Meanwhile, with continuing steep economic growth, major emerging economies such as China and India will become increasingly reliant on energy imports. These shifts will have major impacts on trade balances.

scholarly journals Design and experimental demonstration of a high conversion efficiency OPCPA pre-amplifier for petawatt laser facility

2018 ◽  
Vol 6 ◽  
Author(s):  
Xiao Liang ◽  
Xinglong Xie ◽  
Jun Kang ◽  
Qingwei Yang ◽  
Hui Wei ◽  
...  
Keyword(s):  
Conversion Efficiency ◽  
Nonlinear Crystal ◽  
Beam Quality ◽  
Pump Energy ◽  
High Conversion ◽  
Signal Pulse ◽  
High Conversion Efficiency ◽  
Optical Parametric ◽  
Good Beam Quality ◽  
Laser Facility

We present the design and experiment of a broadband optical parametric chirped-pulse amplifier (OPCPA) which provides high conversion efficiency and good beam quality at 808 nm wavelength. Using a three-dimensional spatial and temporal numerical model, several design considerations necessary to achieve high conversion efficiency, good beam quality and good output stability are discussed. To improve the conversion efficiency and broaden the amplified signal bandwidth simultaneously, the nonlinear crystal length and OPCPA parameters are analyzed and optimized with the concept of dissipating amplified idler between optical parametric amplification (OPA) of two crystals configuration. In the experiment, an amplifier consisting of two OPCPA stages of ‘L’ type configuration was demonstrated by using the optimized parameters. An amplified signal energy of 160 mJ was achieved with a total pump-to-signal efficiency of 35% (43% efficiency for the OPCPA stage 2). The output bandwidth of signal pulse reached 80 nm and the signal pulse was compressed to 24 fs. The energy stability reached 1.67% RMS at 3% pump energy variation. The optimized OPCPA amplifier operates at a repetition rate of 1 Hz and is used as a front-end injection for the main amplifier of SG-II 5PW laser facility.

scholarly journals Conversion of biomass to biofuels and life cycle assessment: a review

2021 ◽  
Author(s):  
Ahmed I. Osman ◽  
Neha Mehta ◽  
Ahmed M. Elgarahy ◽  
Amer Al-Hinai ◽  
Ala’a H. Al-Muhtaseb ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Biomass Conversion ◽  
Biofuel Production ◽  
Process Efficiency ◽  
Liquid Fuels ◽  
Thermochemical Processes ◽  
Lower Temperature

AbstractThe global energy demand is projected to rise by almost 28% by 2040 compared to current levels. Biomass is a promising energy source for producing either solid or liquid fuels. Biofuels are alternatives to fossil fuels to reduce anthropogenic greenhouse gas emissions. Nonetheless, policy decisions for biofuels should be based on evidence that biofuels are produced in a sustainable manner. To this end, life cycle assessment (LCA) provides information on environmental impacts associated with biofuel production chains. Here, we review advances in biomass conversion to biofuels and their environmental impact by life cycle assessment. Processes are gasification, combustion, pyrolysis, enzymatic hydrolysis routes and fermentation. Thermochemical processes are classified into low temperature, below 300 °C, and high temperature, higher than 300 °C, i.e. gasification, combustion and pyrolysis. Pyrolysis is promising because it operates at a relatively lower temperature of up to 500 °C, compared to gasification, which operates at 800–1300 °C. We focus on 1) the drawbacks and advantages of the thermochemical and biochemical conversion routes of biomass into various fuels and the possibility of integrating these routes for better process efficiency; 2) methodological approaches and key findings from 40 LCA studies on biomass to biofuel conversion pathways published from 2019 to 2021; and 3) bibliometric trends and knowledge gaps in biomass conversion into biofuels using thermochemical and biochemical routes. The integration of hydrothermal and biochemical routes is promising for the circular economy.

scholarly journals A Comprehensive Review on Oil Extraction and Biodiesel Production Technologies

2021 ◽  
Vol 13 (2) ◽  
pp. 788
Author(s):  
Zulqarnain ◽  
Muhammad Ayoub ◽  
Mohd Hizami Mohd Yusoff ◽  
Muhammad Hamza Nazir ◽  
Imtisal Zahid ◽  
...  
Keyword(s):  
Energy Demand ◽  
Alternative Fuels ◽  
Fossil Fuels ◽  
Significant Proportion ◽  
Waste Cooking Oil ◽  
Oil Extraction ◽  
Biodiesel Production ◽  
Waste Oils ◽  
Biodiesel Synthesis ◽  
Production Technologies

Dependence on fossil fuels for meeting the growing energy demand is damaging the world’s environment. There is a dire need to look for alternative fuels that are less potent to greenhouse gas emissions. Biofuels offer several advantages with less harmful effects on the environment. Biodiesel is synthesized from the organic wastes produced extensively like edible, non-edible, microbial, and waste oils. This study reviews the feasibility of the state-of-the-art feedstocks for sustainable biodiesel synthesis such as availability, and capacity to cover a significant proportion of fossil fuels. Biodiesel synthesized from oil crops, vegetable oils, and animal fats are the potential renewable carbon-neutral substitute to petroleum fuels. This study concludes that waste oils with higher oil content including waste cooking oil, waste palm oil, and algal oil are the most favorable feedstocks. The comparison of biodiesel production and parametric analysis is done critically, which is necessary to come up with the most appropriate feedstock for biodiesel synthesis. Since the critical comparison of feedstocks along with oil extraction and biodiesel production technologies has never been done before, this will help to direct future researchers to use more sustainable feedstocks for biodiesel synthesis. This study concluded that the use of third-generation feedstocks (wastes) is the most appropriate way for sustainable biodiesel production. The use of innovative costless oil extraction technologies including supercritical and microwave-assisted transesterification method is recommended for oil extraction.

Solvent-Loaded Microspheres for Permeability Enhancement in Heavy Crude Oil Reservoirs

2021 ◽  
Author(s):  
Cengiz Yegin ◽  
Cenk Temizel ◽  
Mustafa Akbulut
Keyword(s):  
Energy Demand ◽  
Fossil Fuels ◽  
Analytical Techniques ◽  
Recovery Factor ◽  
Low Permeability ◽  
Sand Column ◽  
Permeability Enhancement ◽  
Recovery Potential ◽  
Novel Approach ◽  
Vis Spectroscopy

ABSTRACT With their abundancy and high-quality, it is predicted that fossil fuels will remain as the main resource that will meet the global energy demand in the several upcoming decades. Developments in hydrocarbon recovery technologies, both from conventional and unconventional reservoirs, have substantially contributed to the overall production levels in recent years. However, recovery factors obtained by using the current methods are still considered to be insufficient, and the companies have been looking for new materials and methods to enhance the efficiency and amount of recovery. One of the major issues related to low recovery factors is low permeability of reservoirs. Existence of blockages in pore throats and high level of heterogeneity lowers the mobility of hydrocarbons. In this study, we discuss development of an innovative material to be used as an additive in reservoir injection fluids to remove pore blockages in order to enhance the recovery levels. This additive material is made of pressure-sensitive microspheres loaded with solvents, which can (i) easily disperse in the injection fluid and travel to the low-permeability regions, (ii) break under pressure and confinement to release solvents, and (iii) remove blockages by targeting surroundings, especially asphalt-based particles and grains. This approach relies on the breakage of microcapsules in the confined region and release of the solvents to target blockages in porous media. In other words, the developed microspheres improve permeability of reservoirs as a result of pressure- and confinement-dependent breakage and release of solvents. Preparation of these microspheres was achieved by the encapsulation of solvent (toluene) emulsions in silica-based solid shells. Structure and stability of the solvent-loaded microspheres were examined using a variety of analytical techniques including UV-vis spectroscopy, optical microscopy, scanning electron microscope (SEM) and dynamic light scattering (DLS). It was found that the prepared microspheres possessed smooth surfaces with shell thicknesses in the range of 100-150 nm. Additionally, sand column tests were performed to evaluate the recovery potential of injection fluids in presence of solvent-loaded microspheres. It was shown that the use of solvent encapsulated in microspheres doubled the recovery factor of heavy oil compared to that of free solvent dispersed in the injection fluid. Such enhancement in the recovery factor was related to the release of solvents in localized areas, i.e., confined regions, as a consequence of breakage of microspheres. This novel approach of delivering solvents to low-permeability regions provides a significant driving force to eliminate pore blockages to facilitate mobilization of hydrocarbons trapped in confined spaces.

Sign in / Sign up

Export Citation Format

Share Document