Numerical Analyses on Deformation and Failure Characteristics of Surrounding Rock of Gob-Side Entry Retention by Roof Cutting

Universal distinct element code (UDEC) is a simulation software based on the discrete element method, widely used in geotechnical mining. However, in the UDEC, when simulating large-scale excavation, the subsidence of the fractured zone is almost equal to the mining height, which makes the deformation value calculated in the study of gob-side entry retention too large. To solve this problem, in this paper, the double-yield constitutive model is applied to the whole caving zone to analyze the deformation and failure characteristics of surrounding rock along gob-side entry retaining by roof cutting. The results of the simulation are in good agreement with the result of drilling peeking (drilling observation by borehole televiewer) and field condition (observation and measurement in the field). Finally, by using this numerical method, the effects of roadway width, temporary support, and coal side support on the failure of the roof and the arc coal side are studied.

Failure of an under-dip shale slope and its response under excavation conditions

A landslide has occurred in the cut slope located in Chongqing Xi railway station. This slope belongs to a shale under-dip slope and has a complex failure mechanism. Some on-site investigations have been made to explore the deformation characteristics of this slope, and structural geology analyses and outcomes of geological investigations in situ are firstly described. The progressive failure process of the slope during unloading excavation has also been simulated by the Universal Distinct Element Code (UDEC). The obtained deformation characteristics of the slope have proven to well match the field measurements, which verifies the practicability of the UDEC model.

Extensive study on the impact of joint inclinations on the earth pressure in rock ground

The impact of different joint inclinations on the earth pressure was extensively carried out in this study, using Universal Distinct Element Code (UDEC) which is based on discrete element method. Numerical parametric investigations, which considered varying joint inclinations and rock types, were conducted after the numerical method had been verified through a physical model test. The joint angles considered ranged from 0º to 90º in the interval of 5º and the rock types are hard, slightly and moderately weathered rocks. The results of the analyses were subjected to statistical analysis using analysis of variance (ANOVA) at 5% level of significance, and compared with empirical earth pressure envelope for sand ground. The comparisons showed that earth pressures in rock ground are substantially varied from those in sand ground. The result of ANOVA revealed that joint inclinations have statistically significant effect on magnitude of the earth pressure, and practitioners should consider this factor while designing retaining structure in rock masses.

Mechanisms of Rock Burst in Horizontal Section Mining of a Steeply Inclined Extra-Thick Coal Seam and Prevention Technology

Rock bursts have recently become a serious problem in the horizontal section mining of steeply inclined extra-thick coal seams (SIETCSs). However, few studies have been carried out to investigate their mechanisms and prevention. In this study, numerical simulation and field measurements were carried out to investigate the mechanism of rock bursts in the horizontal section mining of an SIETCS. A Universal Distinct Element Code (UDEC) Trigon model was built, based on the Yaojie No.3 Coal Mine, and calibrated through laboratory tests and RQD methods. The results demonstrate that the coal in the elastic zone around the roof is in a high static stress state, due to the asymmetric clamping and squeezing of the roof and floor. Strong dynamic loads are formed by breakage of the roof and the failure of multiple hinged beam structures during the evolution process of the overlying strata. Rock bursts occur on the roof side when the superimposition of the static stress σs and stress increment σd induced by such dynamic loads is greater than the critical stress σmin of the coal and rock. We propose a technical prevention scheme for the considered mine. Field studies suggest that the proposed technology can effectively prevent and control rock bursts in the horizontal section mining of SIETCSs.

Buckling Failure Mechanism of a Rock Dam Foundation Fractured by Gentle Through-Going and Steep Structural Discontinuities

The failure mechanism analysis of dam foundations is key for designing hydropower stations. This study analyses the rock masses in a sluice section, which is an important part of the main dam of the Datengxia Hydropower Station currently built in China. The stability of the sluice rock masses is predominantly affected by gentle through-going soft interlayers and steep structural fractures. Its foundation failure mechanism is investigated by means of a numerical method, i.e., Universal Distinct Element Code (UDEC) and the geomechanical model method. The modeling principle and process, and results for the rock dam foundation are introduced and generated by using the abovementioned two methods. The results indicate that the failure mechanism of the foundation rock masses, as characterized by gentle through-going and steep structural discontinuities, is not a conventional type of shear failure mechanism but a buckling one. This type of failure mechanism is verified by analyzing the deformation features resulting from the overloading of both methods and strength reduction of the numerical method.

Numerical Investigation into Evolution of Crack and Stress in Residual Coal Pillars under the Influence of Longwall Mining of the Adjacent Underlying Coal Seam

Longwall mining of the adjacent coal seam with the presence of residual coal pillars overlying the seam can result in abnormal strata pressure and severe overburden failure, which poses a significant threat to mining safety. The threat is mainly manifested in the form of intense coal or rock burst and hazardous interconnection between gobs. This study employed the universal distinct element code (UDEC) to investigate the microscopic failure mechanism of the overlying residual coal pillars under the influence of longwall mining of an adjacent underlying coal seam in Yuanbaowan coal mine, China. Using the Voronoi method, we innovatively visualized the evolution of cracks in residual pillars, revealed the mechanism behind the failure of pillars, and explored the evolution and distribution of abutment stress. Also, strata movement characteristics during underlying panel extraction have been surveyed. Based on the modeling results, effective measures are proposed to ensure safe mining under residual coal pillars. This study might provide a certain reference for safe extraction of multiple seams in Datong Coalfield, China, and also in the central and western Appalachian Basin, United States, where many mining activities are carried out under residual pillars.

Formation, breaching and flood consequences of a landslide dam near Bujumbura, Burundi

This paper investigates the possible formation of a landslide dam on the Kanyosha River near Bujumbura, the capital of Burundi, as well as the interplay between the breaching of this landslide dam and the flooding along the river. We present an end-to-end analysis, ranging from the origin of the landslide up to the computation of flood waves induced by the dam breaching. The study includes three main steps. First, the mass movement site was investigated with various geophysical methods that allowed us to build a general 3-D model and detailed 2-D sections of the landslide. Second, this model was used for dynamic landslide process modelling with the Universal Distinct Element Code. The results showed that a 15 m high landslide dam may form on the river. Finally, a 2-D hydraulic model was set up to find out the consequences of the breaching of the landslide dam on flooding along the river, especially in an urban area located downstream. Based on 2-D maps of maximum water depth, flow velocity and wave propagation time, the results highlight that neglecting the influence of such landslide dams leads to substantial underestimation of flood intensity in the downstream area.

Formation, breaching and flood consequences of a landslide dam near Bujumbura, Burundi

This paper investigated the possible formation of a landslide dam on the Kanyosha River near Bujumbura, the capital of Burundi, as well as the interplay between the breaching of this landslide dam and the flooding along the river. We present an end-to-end analysis, ranging from the origin of the landslide up to the computation of flood waves induced by the dam breaching. The study includes three main steps. First, the mass movement site was investigated with various geophysical methods that allowed us to build a general 3D model and detailed 2D sections of the landslide. Second, this model was used for dynamic landslide process modelling with the Universal Distinct Element Code. The results showed that a fifteen-meter-high landslide dam may form on the river. Finally, a 2D hydraulic model was setup to find out the consequences of the breaching of the landslide dam on flooding along the river, especially in an urban area located downstream. Based on 2D maps of maximum water depth, flow velocity and wave propagation time, the results highlight that neglecting the influence of such landslide dams leads to substantial underestimation of flood hazard in the downstream area.