scholarly journals The use of Soxhlet extractor for the production of tinctures from plant raw materials

2020 ◽  
Vol 175 ◽  
pp. 08010
Author(s):  
Dmitrii Borodulin ◽  
Maksim Prosin ◽  
Igor Bakin ◽  
Boris Lobasenko ◽  
Marina Potapova ◽  
...  
Keyword(s):  
Maximum Rate ◽  
Raw Materials ◽  
Extraction Process ◽  
Regression Equations ◽  
Technological Regime ◽  
Soxhlet Extractor ◽  
Plant Raw Materials ◽  
Aromatic Alcohols ◽  
The Cost

The most important stage in the production of tinctures and aromatic alcohols is the extraction process. The paper aims to study the process of extracting target compounds from fruit and berry raw materials for the production of alcoholic tinctures. The research was carried out using a Soxhlet extractor. The experimental results were processed using the method of multiple regression analysis. As a result of processing the experimental data, the optimal technological regime parameters for the production of aromatic cranberry alcoholic tincture were selected. The cranberry tinctures produced at these parameters have a high content of target substances and reach maximum scores for taste, aroma and color. The obtained regression equations allow predetermining the quality of the resulting drink with a confidentiality of more than 90%. The use of the Soxhlet extractor allowed reducing the duration of the preparation of the cranberry tincture to 15 minutes, which is by times different from the classic method of tincture production. The use of the Soxhlet extractor allows reducing the consumed amount of solvent and raw materials, due to the almost maximum rate of the extraction. All this, in turn, affects the cost of the final product and the costs of the manufacturer.

scholarly journals Modelling of the process of vybromechanical activation of plant raw material hydrolysis for pectin extraction

10.5219/1305 ◽  
2020 ◽  
Vol 14 ◽  
pp. 239-246
Author(s):  
Igor Palamarchuk ◽  
Mikhailo Mushtruk ◽  
Vladislav Sukhenko ◽  
Vladislav Dudchenko ◽  
Lidija Korets ◽  
...  
Keyword(s):  
Power Consumption ◽  
Raw Materials ◽  
Equations Of Motion ◽  
Oscillatory System ◽  
Drive Shaft ◽  
Raw Material ◽  
Plant Raw Materials ◽  
The Cost ◽  
Power And Energy

Centrifugal and vibrational technological effects are among the main approaches to intensify the process of plant raw materials hydrolysis for pectin extraction. With the impulse intensification of such a process, it is possible not only to increase its efficiency, but also to achieve the compactness of the equipment, reduce the cost of electricity and improve the quality of the product of hydrolysis. The hypothesis is confirmed, according to which the vibro-centrifugal intensification of hydrolysis increases the driving force of the process by not only activating the material flows of raw materials and reagents, but also by reducing the resistance in the technological environment. Graphical and analytical dependencies of the power and energy parameters of the oscillatory system were obtained, which proved the overcoming of the flow resistance of the liquid medium in the entire speed range of the drive shaft with the potential to intensify the process at a power consumption of 2.0 – 3.0 kW and or by the force of 2.3 – 2.5 kN using the Lagrange and Cauchy methods for composing and solving the equations of motion of the moving components of the tested hydrolyser with vibrating activators, and the methods of mathematical analysis and their processing in the MathCAD. The analysis of the presented parameters of the studied process of mixing the pectin-containing mass in the hydrolyser allowed us to determine the rational mode parameters of processing, which correspond to the angular velocity of the drive shaft  rad/s at the power consumption of 500 – 600 watts.

scholarly journals Research of extractors for the extraction of target components from plant materials of various internal structures

2021 ◽  
Vol 273 ◽  
pp. 01031
Author(s):  
Maksim Prosin ◽  
Dmitrii Borodulin ◽  
Elena Safonova ◽  
Yana Golovacheva
Keyword(s):  
Raw Materials ◽  
Extraction Process ◽  
Liquid System ◽  
Raw Material ◽  
Plant Materials ◽  
Plant Raw Materials ◽  
Internal Structures ◽  
Main Production ◽  
Solid Liquid

Manufacturers prefer berries and fruits, but there are also other products made with seeds, aromatic and medicinal herbs, spices, as well as other components. The main production stage for obtaining tinctures and aromatic alcohols is the extraction process. Currently, a large number of designs of extractors for solid-liquid system of periodic and continuous action have been developed. All of them are different from each other in terms of efficiency, energy consumption and applicability in a particular production. The purpose of this work is to study and analyze the influence of the structure of raw materials on the efficiency of extraction in equipment of various types. To carry out the research, three types of raw materials were selected from various groups: rose hips, penny root and chaga mushrooms. The most suitable and promising extractor designs are the Soxlhet extractor; centrifugal extractor; rotary-pulsating apparatus. The results of the work, it was concluded that the most versatile apparatus is the rotary-pulsating apparatus, since during its operation the raw material is crushed. Plant raw materials give the most complete target components with list time. In devices of similar designs, the different internal structure of raw materials does not affect the quality of the extracts obtained.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

CONSUMER PROPERTIES OF PASTA WITH POWDER FROM MARIGOLD INFLORESCENCES (TAGETES L.)

2021 ◽  
Vol 40 (4) ◽  
pp. 102-112
Author(s):  
SHAPOVALOVA Nataliia ◽  
VEZHLIVTSEVA Svitlana ◽  
ANTIUSHKO Dmytro
Keyword(s):  
Raw Materials ◽  
Experimental Studies ◽  
The Body ◽  
Biologically Active Substances ◽  
Biologically Active ◽  
Organoleptic Properties ◽  
Biological Value ◽  
Plant Raw Materials ◽  
Active Substances

Background. The deficiency of essential nutrients in the human body is the root cause of reduced efficiency, general resistance of the body to various diseases. That is an urgent problem in the context of the spread of coronavirus infection. In this regard, the search for opportunities to meet the needs of the population in food products that contain biologically active substances (BAS) through the use of high-value and at the same time available plant raw materials is extremely important. Marigolds attract special attention among such raw materials. The aim of the work is to study the chemical composition and evaluate the consumer properties of Tagetes L. varieties, zoned in the Kiev region, to prove the possibility of increasing the biological value of pasta by adding to their recipe powder from marigold inflorescences. Materials and methods. The object of research is pasta of B group (noodles). Inflorescences of marigolds of different varieties gathered during the flowering period in July-September 2019–2020 in the territory of Vasylkiv and Obukhiv districts of Kyiv region, Ukraine were used as enriching plant raw materials. The quality of finished pasta was assessed by organoleptic and physicochemical indexes (moisture content and titratable acidity). The content of mineral elements in the fine powder of marigold inflorescences was determined on the EXHERT-3L device, the quantitative composition and BAS identification – by spectrophotometric analysis on the device Specord-200 Analytic Jena UV-vis. The integrated quality index of pasta products was calculated taking into account the importance factors of individual indexes. Results. Comparing the obtained results, we can state that all the studied varieties – Gold Kopfen, Orange Flame, Hawaii, Equinox are characterized by high biological value, regardless of the area of collection. As a result of calculated and experimental studies it was determined that the addition of 7 % of the supplement does not provide the required supply of vitamins and minerals. Replacing the flour in the recipe by 20 % significantly improves the mineral composition, but deteriorates the taste and aromatic properties of pasta. The most optimal and rational amount of added additive is 15 %, as it improves the organoleptic properties of pasta and enriches their BAS. Conclusion. The usage of non-traditional vegetable raw materials, in particular powder from marigold inflorescences, which is rich in biologically active substances, allows not only to expand the range, improve the quality of finished products, but also increase the biological value of the product. The optimal amount of additive –powder from marigold inflorescences, was defined. It is 15 % by weight of flour in the production of noodles. This concentration allows not only to improve the organoleptic properties, but also to increase the content of biologically active substances – vitamins, micro- and macronutrients. The usage of non-traditional natural raw materials (powder from marigold inflorescences) allows to abandon artificial colorsand give the finished pasta a pleasant colorand aroma.

scholarly journals The Effectiveness of the Quality of Performance Using the Cost Accounting Information System in the Control of Quality Costs Study in the General Company for Electrical Industries

2019 ◽  
Vol 27 (2) ◽  
pp. 115-132
Author(s):  
Hanan Abdullah Hassan Al-Amar ◽  
Qasim Ali Omran Al-Bayati ◽  
Huda Jabbar Kadhum Al-Haiyali
Keyword(s):  
Information Systems ◽  
Raw Materials ◽  
Accounting Information ◽  
Cost Accounting ◽  
Technical Standards ◽  
Accounting Systems ◽  
Accounting Information Systems ◽  
Quality Costs ◽  
The Cost

The financial operations which carried out by economic unity are proven treatment and documenting and continuous down to makers decision by relevance objective and time and then to reflect on the decision maker in any center of responsibility. That ’s provided by the system accounting information where the source is the basis for producing important accounting information, And the cost accounting information systems of the most important information systems that deal with data processing and conversion to information of relative importance to the beneficiaries. Which is consist with The objective of the research that emphasize the importance of accounting systems in general and systems cost in particular to achieve the highest c The research has led to a number of results, the most important of which is the difficulty in controlling quality costs as well as the waste of economic resources in the company. The researchers recommended adherence to the technical standards to achieve the quality of performance as well as conducting a thorough examination of samples and focusing on the quality of raw materials and testing before use to reduce the proportion Damage.

OPTIMIZATION OF DOSAGES OF NON-TRADITIONAL RAW MATERIALS IN THE FORMULATION OF PREVENTIVE ORIENTATION BREAD

2021 ◽  
Author(s):  
Е.И. ПОНОМАРЕВА ◽  
С.И. ЛУКИНА ◽  
А.А. ЖУРАВЛЕВ ◽  
С.М. ПАВЛОВСКАЯ
Keyword(s):  
Dimensional Stability ◽  
Specific Volume ◽  
Raw Materials ◽  
Biologically Active ◽  
Regression Equations ◽  
Technical Specifications ◽  
Optimal Values ◽  
Method Of Production ◽  
Statistical Criteria

Исследовано влияние сочетания нетрадиционных видов сырья – жидкого виноградного сахара и куркумы на качество хлеба из пшеничной муки. Проведена оптимизация дозировок этих рецептурных компонентов по выходным параметрам – удельному объему и формоустойчивости готового изделия. Оптимизацию рецептурного состава хлеба проводили с использованием методов математической статистики и дифференциального исчисления. Построены математические модели в виде регрессионных уравнений. Обработку экспериментальных данных выполняли по статистическим критериям Стьюдента, Кохрена и Фишера при доверительной вероятности 0,95. Дана графическая интерпретация регрессионных уравнений. Оптимизацию рецептурного состава хлеба проводили методом свертывания частных критериев в обобщенный аддитивный критерий. Определены оптимальные значения факторов: дозировка, % к массе муки, жидкого виноградного сахара – 2,50, куркумы – 2,75, обеспечивающие получение изделий с наилучшим сочетанием значений удельного объема и формоустойчивости. На основе полученных данных разработана рецептура и способ производства хлеба «Мерита» профилактической направленности (ТУ 9110–515–02068108–2019), характеризующегося улучшенным качеством и повышенной пищевой ценностью за счет дополнительного внесения биологически активных нутриентов. The influence of a combination of non-traditional raw materials – liquid grape sugar and turmeric on the quality of wheat flour bread has been studied. Optimization of the dosages of these prescription components according to the output parameters – specific volume and dimensional stability of the finished product was carried out with using methods of mathematical statistics and differential calculus. Mathematical models in the form of regression equations are constructed. The experimental data were processed according to the statistical criteria of Student, Cochran, and Fisher with a confidence probability of 0,95. Optimization of the formulation composition of bread was carried out by the method of folding partial criteria into a generalized additive criterion. The optimal values of the factors are determined: dosage, % by weight of flour, liquid grape sugar –2,50, turmeric – 2,75, ensuring the production of products with the best combination of specific volume and dimensional stability. On the basis of the obtained data, the formulation and method of production of bread «Merita» of a preventive orientation (Technical specifications 9110–515–02068108–2019) were developed. The product has improved quality and increased nutritional value due to the additional introduction of biologically active nutrients.

Current State and Prospects of DNA Barcoding and DNA Fingerprinting in the Analysis of the Quality of Plant Raw Materials and Plant-Derived Drugs

2019 ◽  
Vol 9 (4) ◽  
pp. 301-314 ◽  
Author(s):  
E. V. Zhokhova ◽  
A. V. Rodionov ◽  
M. N. Povydysh ◽  
M. Yu. Goncharov ◽  
Ya. A. Protasova ◽  
...  
Keyword(s):  
Dna Barcoding ◽  
Dna Fingerprinting ◽  
Raw Materials ◽  
Plant Raw Materials ◽  
Current State

scholarly journals Determination of the transfer step of the ore chute while mining the technogenic deposit of the bulk type

2020 ◽  
Vol 166 ◽  
pp. 02004
Author(s):  
Volodymyr Peregudov ◽  
Ihor Hryhoriev ◽  
Serhii Joukov ◽  
Yulian Hryhoriev
Keyword(s):  
Raw Materials ◽  
Mining Industry ◽  
Process Conditions ◽  
Geological Conditions ◽  
Scientific Task ◽  
Technogenic Deposit ◽  
Mining Works ◽  
The Cost

Further development of the open mining works on the domestic enterprises will be accompanied by the worsening of mining-geological conditions and declining of the quality of iron ore raw materials. In the same time, the accumulated mining wastes, that can make the technogenic deposits, pass into one of the important sources of the mineral raw materials. Taking into account this thing, the development and implementation of the modern technological circuits of the technogenic deposit development is an actual calling for mining industry, and determination and optimization of process conditions of the technogenic deposit development – is the scientific task of this publication. The obtained results of studies of the optimum step value of the ore chute transfer during the technogenic deposit development can be used by design organizations and mining enterprises for designing works. The obtained methodology and the proposed mathematical dependencies will reduce the cost of mining of the technogenic deposit due to the reasonable timely transfer of the open ore chute.

Sign in / Sign up

Export Citation Format

Share Document