Low-cost thermo-chemical process of TiO2 powder purification: Study of iterative gettering effect

2021 ◽  
Author(s):  
Nesrine Jaouabi ◽  
Wala Medfai ◽  
Marouan Khalifa ◽  
Rabia Zaghouani ◽  
Hatem Ezzaouia
Keyword(s):  
Porous Layer ◽  
Sacrificial Layer ◽  
Low Cost ◽  
Nir Spectroscopy ◽  
Tio2 Powder ◽  
X Ray Diffraction ◽  
X Ray ◽  
Density Reduction ◽  
Transmission Electron ◽  
Layer Effect

The titanium dioxide (TiO2) purity is very important for the TiO2-based applications making essential the impurities density reduction. In this study, we propose an efficient purification process of TiO2 powder in order to reduce impurities. The low-cost proposed approach is based on an iterative gettering (IG) process combining three main steps: (1) a porous TiO2 sacrificial layer formation (p-TiO2), (2) a rapid thermal annealing (RTA) of p-TiO2 powder in an infrared oven at 950°C under air permitting the residual impurities diffusion to the porous layer surface and (3) etching in acid solution to remove the porous layer. Effect of the proposed gettering process on purification efficiency was evaluated by different characterization techniques such as the transmission electron microscopy (TEM), the energy dispersive x-ray spectroscopy (EDX), the UV–Visible-NIR spectroscopy, the X-ray diffraction (XRD) and atomic absorption spectroscopy (AAS). The obtained results showed the efficient removal of metal impurities, such as Cu, Al, P, and Fe confirming the efficiency of the process improving the purity from 89% to 99.96%.

Corrosion protection performance of titania nanoparticles filled poly(4-methyl-5-vinylthiazole) applied on mild steel in 3.5% sodium chloride solution

2020 ◽  
pp. 875608792093930 ◽  
Author(s):  
I Pugazhenthi ◽  
S Mohammed Ghouse
Keyword(s):  
Mild Steel ◽  
Electrochemical Impedance ◽  
Low Cost ◽  
Nano Particles ◽  
Titania Nanoparticles ◽  
X Ray Diffraction ◽  
Corrosive Media ◽  
X Ray ◽  
Polymer Hybrid ◽  
Transmission Electron

Mild steel materials have wide applications in marine construction, because they are low cost, available and easy to handle. However, they have to be protected from corrosive media by coating with polymer hybrid materials. This paper focuses on the anticorrosive properties of poly(4-methyl-5-vinylthiazole) PVTZ coatings on mild steel. Further the coating resistance is enhanced by incorporating Titania Nano particles (TiO2NPs). The nanoparticles were evaluated using X-ray diffraction studies (XRD) and transmission electron microscopy (TEM). PVTZ and its TiO2 nanocomposite were coated on mild steel. Their anticorrosive behavior was analyzed by potentiodynamic polarization and electrochemical impedance spectroscopy in 3.5% (w/v) NaCl.

scholarly journals A Novel X-Ray Radiation Sensor Based on Networked SnO2 Nanowires

2019 ◽  
Vol 9 (22) ◽  
pp. 4878 ◽  
Author(s):  
Jae-Hun Kim ◽  
Ali Mirzaei ◽  
Hyoun Woo Kim ◽  
Hong Joo Kim ◽  
Phan Quoc Vuong ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Low Cost ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Radiation Sensor ◽  
Sno2 Nanowires ◽  
Radiation Sensors

X-Ray radiation sensors that work at room temperature are in demand. In this study, a novel, low-cost real-time X-ray radiation sensor based on SnO2 nanowires (NWs) was designed and tested. Networked SnO2 NWs were produced via the vapor–liquid–solid technique. X-ray diffraction (XRD), transmission electron microscopy (TEM) and field emission scanning electron microscopy (SEM) analyses were used to explore the crystallinity and morphology of synthesized SnO2 NWs. The fabricated sensor was exposed to X-rays (80 kV, 0.0–2.00 mA) and the leakage current variations were recorded at room temperature. The SnO2 NWs sensor showed a high and relatively linear response with respect to the X-ray intensity. The X-ray sensing results show the potential of networked SnO2 NWs as novel X-ray sensors.

Novel synthesis of AlN nanowires with controlled diameters

2001 ◽  
Vol 16 (11) ◽  
pp. 3133-3138 ◽  
Author(s):  
Jun Liu ◽  
X. Zhang ◽  
Yingjiu Zhang ◽  
Rongrui He ◽  
Jing Zhu
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
High Efficiency ◽  
Low Cost ◽  
X Ray Diffraction ◽  
Synthesis Mechanism ◽  
X Ray ◽  
Novel Synthesis ◽  
Transmission Electron ◽  
New Synthesis

A relatively low-cost, high-efficiency method is reported to synthesize AlN nanowires, using carbon nanotubes as templates. The AlN nanowires were fabricated at 1100 °C, for 60 min. The diameters of the product could be roughly controlled by the sizes of carbon nanotubes selected as starting materials. The AlN nanowires obtained were among the thinnest ever known. X-ray diffraction, selected-area diffraction, energy dispersive spectroscopy, and high-resolution transmission electron microscopy, etc. were employed to characterize the products, which were found to be single crystals with some defects. The axes of the nanowires are normal to {1010} crystal planes. A new synthesis mechanism is proposed.

scholarly journals Experimental Investigation of the Coprecipitation Method: An Approach to Obtain Magnetite and Maghemite Nanoparticles with Improved Properties

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Wilson Sacchi Peternele ◽  
Victoria Monge Fuentes ◽  
Maria Luiza Fascineli ◽  
Jaqueline Rodrigues da Silva ◽  
Renata Carvalho Silva ◽  
...  
Keyword(s):  
Low Cost ◽  
Morphological Characteristics ◽  
Coprecipitation Method ◽  
Maghemite Nanoparticles ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Chemical Coprecipitation ◽  
Transmission Electron ◽  
The Magnetic Field

Iron oxides that exhibit magnetic properties have been widely studied not only from an academic standpoint, but also for numerous applications in different fields of knowledge, such as biomedical and technological research. In this work, magnetite and maghemite nanoparticles were synthesized by chemical coprecipitation of FeCl2·4H2O and FeCl3·6H2O (proportion of 1 : 2) in three different cases using two bases (sodium hydroxide and hydroxide ammonium) as precipitants. The chemical coprecipitation method was selected for its simplicity, convenience, reproducibility, and low cost in the use of glassware. The nanostructured materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and magnetometry (VSM). The objective of this work is to study the variation in the morphological characteristics and physical properties of nanoparticles magnetic as a function of the different production processes. As observed by TEM, the materials obtained from the precipitating agent NH4OH are more uniform than those obtained with NaOH. From XRD pattern analysis, it appears that the obtained materials correspond to magnetite and maghemite and, from magnetometry VSM analysis, show high magnetization as a function of the magnetic field at room temperature, indicating that these materials are superparamagnetic.

Defect Pair Formation by Implantation-Induced Stresses in High-Dose Oxygen Implanted Silicon-on-Insulator Material

1993 ◽  
Vol 316 ◽  
Author(s):  
J.D. Lee ◽  
J.C. Park ◽  
D. Venables ◽  
S.J. Krause ◽  
P. Roitman
Keyword(s):  
Defect Density ◽  
Silicon On Insulator ◽  
Surface Strain ◽  
High Dose ◽  
X Ray Diffraction ◽  
Near Surface ◽  
X Ray ◽  
Density Reduction ◽  
Transmission Electron ◽  
Pair Density

ABSTRACTDefect microstructure and the near-surface strain of high-dose oxygen implanted silicon-on-insulator material (SIMOX) were investigated as a function of dose, implant temperature, and annealing temperature by transmission electron microscopy and high resolution x-ray diffraction. Dislocation half loops (DHLs) begin to form by stress assisted climb at a critical stress level due to implantation-induced damage. DHLs evolve into through-thickness defect (TTD) pairs by expansion during annealing. Both DHL and TTD-pair density increase with higher implant dose and lower implant temperature. Possible methods for defect density reduction are suggested based on the results of this study.

Changing width bandgap of TiO2 nanoparticles incorporating GO

MRS Advances ◽  
2019 ◽  
Vol 4 (61-62) ◽  
pp. 3423-3431
Author(s):  
Daniela K. Calvo-Ramos ◽  
Marina Vega-González ◽  
José Santos-Cruz ◽  
Francisco Javier De Moure-Flores ◽  
Sandra A. Mayén-Hernández
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Graphene Oxide ◽  
Nir Spectroscopy ◽  
Improved Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

ABSTRACTNanoparticles of titanium dioxide (TiO2), synthesized by the sonochemical technique, were mixed with different amounts of graphene oxide (GO), obtained by the improved method of Hummer, in order to modify their bandwidth. The TiO2/OG compounds were characterized using different techniques: X-ray Diffraction (XRD), transmission electron microscopy (TEM), Raman and UV-Vis-NIR spectroscopy. TiO2 bandgap decreased, with GO incorporation, from 3.2 to 2.72 eV when GO was present at 20 weigh percentage (TiO2/GO-20%). Photodegradation experiments of methylene blue (MB) were performed with the materials to verify their photocatalytic activity. At 40 minutes, the pure TiO2 degraded 48% of MB, whereas the compound TiO2/GO-20% degraded 88%, showing a good incorporation of both compounds and the improvement of TiO2 photocatalitic properties.

Green Synthesis of Multifunctional Carbon Nanodots and Their Applications as a Smart Nanothermometer and Cr(VI) Ions Sensor

NANO ◽  
2018 ◽  
Vol 13 (12) ◽  
pp. 1850147 ◽  
Author(s):  
Lu Li ◽  
Congying Shao ◽  
Qian Wu ◽  
Yunjian Wang ◽  
Mingzhu Liu
Keyword(s):  
Fluorescence Intensity ◽  
Low Cost ◽  
Inner Filter Effect ◽  
Water Soluble ◽  
Carbon Nanodots ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
One Step ◽  
Apple Peels

In this work, water-soluble and blue-emitting carbon nanodots (CDs) were synthesized from apple peels for the first time via one-step hydrothermal method. The synthetic route is facile, green, economical and viable. The as-prepared CDs were characterized thoroughly by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman, Fourier transform infrared (FT-IR), X-ray photoelectron (XPS), fluorescence and UV–Vis absorption spectroscopy in terms of their morphology, surface functional groups and optical properties. The results show that these CDs possessed ultrasmall size, good dispersivity, and high tolerance to pH, ionic strength and continuous UV irradiation. Significantly, the CDs had fast and reversible response towards temperature, and the accurate linear relationship between fluorescence intensity and temperature was used to design a novel nanothermometer in a broad temperature range from 5 to 65[Formula: see text]C facilely. In addition, the fluorescence intensity of CDs was observed to be quenched immediately by Cr(VI) ions based on the inner filter effect. A low-cost Cr(VI) ions sensor was proposed employing CDs as fluorescent probe, and it displayed a wide linear range from 0.5 to 200[Formula: see text][Formula: see text]M with a detection limit of 0.73[Formula: see text][Formula: see text]M. The practicability of the developed Cr(VI) sensor for real water sample assay was also validated with satisfactory recoveries.

scholarly journals Effects of Pr and Yb Dual Doping on the Thermoelectric Properties of CaMnO3

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1807 ◽  
Author(s):  
Cuiqin Li ◽  
Qianlin Chen ◽  
Yunan Yan
Keyword(s):  
Electron Microscopy ◽  
Figure Of Merit ◽  
Low Cost ◽  
X Ray Diffraction ◽  
Thermoelectric Figure ◽  
X Ray ◽  
Transmission Electron ◽  
New Strategy ◽  
Low Toxicity

There has been research on CaMnO3 with natural abundance, low toxicity, and low cost as promising candidates for n-type thermoelectric (TE) materials. In this paper, Ca1−2xPrxYbxMnO3 with different Pr and Yb contents (x = 0, 0.01, 0.02, 0.03, 0.04 and 0.05) were synthesized by means of coprecipitation. With X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM), researchers characterized the phase structure and morphology of all the samples. The oxidation states of manganese were determined by X-ray photoemission spectroscopy (XPS). The role of Ca-site dual doping in the TE properties was also investigated. Increasing the Pr and Yb contents leads to decreases in the electrical resistivity and Seebeck coefficient, leading to a power factor of 3.48 × 10−4 W·m−1·K−2 for x = 0.04 at 773 K, which is its maximum. Furthermore, the thermal conductivity (κ) decreases with increasing x, and κ = 1.26 W m−1·K−1 is obtained for x = 0.04 at 973 K. Ca0.92Pr0.04Yb0.04MnO3 exhibit a ZT (thermoelectric figure of merit) value of 0.24 at 973 K, approximately 3 times more than that of the pristine CaMnO3. Thus, the reported method is a new strategy to enhance the TE performance of CaMnO3.

HRTEM Study of nano-TiO2 Powder

2008 ◽  
Vol 59 (4) ◽  
Author(s):  
Ionela Carazeanu Popovici ◽  
Mihai Girtu ◽  
Elisabeta Chirila ◽  
Victor Ciupina ◽  
Gabriel Prodan
Keyword(s):  
Electron Microscopy ◽  
Anatase Phase ◽  
Thermal Hydrolysis ◽  
Tio2 Powder ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
X Ray ◽  
Transmission Electron ◽  
Hydrolysis Of ◽  
Photovoltaic Material

Titanium dioxide (TiO2) has been one of the most attractive photo electrochemical and photovoltaic material during the last decades due to its scientific and technological importance. The TiO2 powder was synthesized by thermal hydrolysis of TiCl4. The crystalline structures and morphologies of the powder have been characterized by high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The crystals dimensions varied from 15 nm to 23 nm and it have been established that the studied nanopowder is stable in the anatase phase.

scholarly journals Facile Synthesis of Calcium Carbonate Nanoparticles from Cockle Shells

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Kh. Nurul Islam ◽  
A. B. Z. Zuki ◽  
M. E. Ali ◽  
Mohd Zobir Bin Hussein ◽  
M. M. Noordin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Calcium Carbonate ◽  
Large Scale ◽  
Low Cost ◽  
Analytical Techniques ◽  
Variable Pressure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir

A simple and low-cost method for the synthesis of calcium carbonate nanoparticles from cockle shells was described. Polymorphically, the synthesized nanoparticles were aragonites which are biocompatible and thus frequently used in the repair of fractured bone and development of advanced drug delivery systems, tissue scaffolds and anticarcinogenic drugs. The rod-shaped and pure aragonite particles of30±5 nm in diameter were reproducibly synthesized when micron-sized cockle shells powders were mechanically stirred for 90 min at room temperature in presence of a nontoxic and nonhazardous biomineralization catalyst, dodecyl dimethyl betaine (BS-12). The findings were verified using a combination of analytical techniques such as variable pressure scanning electron microscopy (VPSEM), transmission electron microscopy (TEM), Fourier transmission infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), and energy dispersive X-ray analyser (EDX). The reproducibility and low cost of the method suggested that it could be used in industry for the large scale synthesis of aragonite nanoparticles from cockle shells, a low cost and easily available natural resource.

Sign in / Sign up

Export Citation Format

Share Document