scholarly journals Characterization of clay deposits in the Adrar region, with a view to their valorization in the building materials industry

2018 ◽  
Vol 149 ◽  
pp. 01079
Author(s):  
Abbou Mohammed ◽  
Moulay Omar Hassan ◽  
Semcha Abdélaziz ◽  
Kazi-Aoual Fatiha
Keyword(s):  
Construction Industry ◽  
Building Materials ◽  
Local Development ◽  
Construction Materials ◽  
Sedimentary Basins ◽  
Point Of View ◽  
Clay Deposits ◽  
Algerian Sahara ◽  
Local Materials

In the context of sustainable local development of the Adrar region, one of the largest regions in the Algerian Sahara. The search for local useful substances has been initiated by the Algerian state to cover the need for building materials in the construction industry. However, from a geological point of view, the Adrar zone is located in the extension of the primary chain of the Ougarta which separates two sedimentary basins of Reggane and Timimoun, as well as the basin of Sbâa. In this context, an experimental study is focused on the characterization of clay deposits, with a view to their valorization in the construction materials industry (ceramics) sector, with the aim of contributing to the use of local materials.

scholarly journals Bio-based construction materials for a sustainable future

2019 ◽  
Author(s):  
Rijk Block ◽  
Barbara Kuit ◽  
Torsten Schröder ◽  
Patrick Teuffel
Keyword(s):  
Construction Industry ◽  
Structural Engineering ◽  
Building Materials ◽  
Raw Materials ◽  
Construction Materials ◽  
Flax Fibres ◽  
The Past ◽  
Natural Building ◽  
Paris Climate Agreement ◽  
Primary Materials

<p>The structural engineering community has a strong responsibility to contribute to a more efficient use of natural resources. Nowadays the construction industry is by far the most resource intense industry sector, approximately 40-50% of all primary raw materials are used, which raises the question about the architects and engineer’s accountability. In this context and as a result of the Paris Climate agreement the Dutch government defined the program “Nederland Circulair in 2050”, which states the ambition to use 50% less primary materials in 2030 and to have a full circular economy in 2050.</p><p>One possible approach to achieve these ambitious goals is the application of renewable, bio-based materials in the built environment and to replace traditional, typically cement-based, materials. Already in the past natural building materials, such as timber and bamboo have been used widely, but in recent years new materials came up and provide new opportunities to be used in the construction industry. The authors explored various alternatives, such as hemp and flax fibres, mycelium and lignin-based fibres for composite materials, which will be described with various experimental and realised case studies.</p>

Environmental Analysis of Construction Materials

2020 ◽  
pp. 90-110 ◽  
Author(s):  
Aysem Berrin Cakmakli
Keyword(s):  
Building Materials ◽  
Sustainable Design ◽  
Construction Materials ◽  
Living Environment ◽  
Point Of View ◽  
Synthetic Materials ◽  
Environmental Product Declarations ◽  
Environmental Life Cycle Assessment ◽  
Construction Activity ◽  
Combustion Pollutants

There is a growing universal awareness of protecting the living and non-living environment and making enlightened decisions to achieve a sustainable development without destruction of the natural resources. In this point of view, selecting building materials according to their energy and health performances gains importance in sustainable design. 3Rs (reducing, reusing, recycling), and supplying a healthy, non-hazardous indoor air for building occupants are two important parameters of environmental life-cycle assessment for materials. Information on exposure to gases and vapors from synthetic materials made from petrochemicals, to heavy metals and pesticides, and to some combustion pollutants that cause acid rain should be determined by analyzing environmental product declarations or material specifications. After studying on building materials individually, they are analyzed in the form of tables for four different stages; manufacturing, application, usage, demolition phase. Consequently, this chapter can guide the designer and engineer to think on the elements of design and construction activity.

scholarly journals A Novel Method for nZEB Internal Coverings Design Based on Neural Networks

Coatings ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 288 ◽  
Author(s):  
José A. Orosa ◽  
Diego Vergara ◽  
Ángel M. Costa ◽  
Rebeca Bouzón
Keyword(s):  
Building Materials ◽  
International Energy Agency ◽  
Construction Materials ◽  
Real Data ◽  
Point Of View ◽  
Building Construction ◽  
Sampled Data ◽  
Energy Agency ◽  
Vapour Permeability ◽  
Weather Changes

Research from the International Energy Agency about indoor ambiences and nearly zero energy buildings (nZEB) in the past has been centred on different aspects such as the prediction of indoor conditions as a function of the weather using laboratory material properties for simulations and real sampled data for validation. Thus, it is possible to use real data for defining behavioural groups of indoor ambiences as a function of real vapour permeability of internal coverings. However, this method is not suitable for modelling it and predicting its behaviour under weather changes, which is of interest to improve the method of selection and use of building construction materials. In this research, artificial intelligence procedures were employed as the first model of permeable coverings material behaviour to provide a newer understanding of building materials and applications for the generation of new control procedures between the mechanical and electronic point of view of building construction materials.

scholarly journals Investigations of quartz raw materials from the locality of Rekovac muncipality

2019 ◽  
Vol 73 (4) ◽  
pp. 265-274
Author(s):  
Slavica Mihajlovic ◽  
Zivko Sekulic ◽  
Jovica Stojanovic ◽  
Vladan Kasic ◽  
Iroslav Sokic ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Physical Properties ◽  
Quartz Sand ◽  
Raw Materials ◽  
Construction Materials ◽  
Size Fraction ◽  
Point Of View ◽  
Raw Material ◽  
Potential Applications

Quality of raw materials, including quartz sand and quartzite, varies from one deposit to another. Furthermore, the material quality determines in which industrial branches it can be used after certain preparation processes. Potential applications of quartz raw materials are: in the construction and refractory industry, ceramics and glass industry, then in metallurgy, foundry and also in production of water treatment filters. Geological investigations of the central Serbia region, in the Rekovac municipality, resulted in identification of occurrence of quartz sand ("Ursula") and quartzite ("Velika Krusevica"). Preliminary laboratory tests and characterization of the quartz sand size fraction -0.63+0.1 mm confirmed the possibility of applying this size fraction in the construction materials industry, while the quartzite can be used in refractory, glass and metallurgy industries. After determining the geological reserve of quartz sand "Ursula" and quartzite "Velika Krusevica", detailed investigations are required. Quality conditions from the aspect of chemical composition and physical properties of quartz sand and quartzite are mostly clearly defined by a special standard for this purpose. On the other hand, there are also application areas where standards does not exist, but users define their quality conditions. This example is with the application of quartz sand in the production of water glass. Chemical composition as well is not always the determining factor for the application of quartz raw material. For example, for quartz sand used for sandblasting, grain form is essential. From the economic analysis point of view, the prices of quartz raw materials vary depending on their chemical and physical properties. After all, what needs to be pointed out is the fact that these raw materials are very widespread in nature and that their exploitation is quite simple. After the raw material is excavated, it is stored and further sieved, washed, dried and processed according to customer requirements. All of these processes are cheaper than preparing, for example, limestone, and significaly cheaper than preparation of metal ores.

scholarly journals Thermal Properties of Foamed Concrete with Addition of Empty Fruit Bunch (EFB) Fiber

2019 ◽  
Vol 8 (10) ◽  
pp. 4662-4670 ◽  
Keyword(s):  
Thermal Properties ◽  
Construction Industry ◽  
Building Materials ◽  
Natural Fiber ◽  
Construction Materials ◽  
Cost Effective ◽  
Fiber Reinforced Concrete ◽  
Empty Fruit Bunch ◽  
Construction Sector ◽  
Foamed Concrete

The key players in the construction industry around the globe are very enthusiastic in producing better construction materials that are cost-effective, durable, excellent thermal insulation, lightweight and long lasting without jeopardizing the environment. One of the best ways in producing such building materials are by incorporating industrial waste materials such as Empty Fruit Bunch (EFB) fiber in foamed concrete (FC). In recent years, the spotlight has been given towards the use of natural fiber reinforced concrete-based materials especially in Malaysia in a quest of economic and environmental upkeep particularly in the construction sector itself. Hence, this study intended to recognize the influence of Empty Fruit Bunch (EFB) fiber of four different contents (0.15%, 0.30%, 0.45% and 0.60 %) by mix volume on thermal properties of FC. There were three densities of 800kg/m3 , 1100kg/m3 and 1400kg/m3 we cast and tested. The mix design of FC (sand: cement: water) is fixed at the ratio of 1:1.5:0.45. The investigation focuses on three parameters which were thermal conductivity, thermal diffusivity and specific heat capacity. Results showed that the addition of EFB in FC plays an important role to improve the thermal performance holistically. The results demonstrated a great potential possesses by the EFB fiber to be utilized in cement-based materials such as the FC mix which is beneficial in reducing the thermal property or the transfer of heat in a produced concrete.

scholarly journals INTERNATIONAL TRENDS AND CURRENT CHALLENGES OF CONSTRUCTION MATERIALS MARKET DEVELOPMENT

2020 ◽  
Author(s):  
Yulia Orlovska ◽  
◽  
Daria Havrylenko ◽  
Keyword(s):  
Real Estate ◽  
Construction Industry ◽  
Information And Communication Technologies ◽  
Building Materials ◽  
Construction Materials ◽  
Construction Sector ◽  
International Trends ◽  
The World ◽  
The Impact ◽  
Construction Services

The main international trends in the world market of construction materials and services have been analyzed. The dynamics of world GDP and exports of construction services for the period 2000-2019 has been studied and a conclusion is made on the impact of economic crises on their growth rates. It has been determined that the dynamics of world exports of construction services is characterized by high instability with peaks of growth and decline, and is more sensitive than GDP growth. It has been noted that overcoming the crisis in the export sector of construction services takes more time and occurs with an approximate two-year time lag compared to GDP dynamics. The share of the construction industry in the world GDP by the degree of development has been analyzed. The reasons for the decline in the share of the construction industry in countries with economies in transition have been substantiated. It has been noted that in the developed countries the share of the construction sector is accounted for by real estate management activities related to maintenance, rent, purchase and sale and other transactions with land and real estate. The forecast values of growth of the market of building materials and services till 2030 have been given. The essence of the term «wide construction» has been revealed and the structure of this sector in different countries of the world is shown. The main exporters in the world construction market have been given and the structural distribution of the largest construction companies in the world ranking by country of origin has been analyzed. The dynamics of income level in the construction industry market for the period 2011-2018 has been studied. It has been noted that an important area of the construction sector is the market of roofing and facade materials and the world's largest companies for the production of this type of construction materials have been revealed. Conclusions on the essence of global transformations of the market of building materials and services have been made, and also it has been defined that they are caused by transnationalization of corporate structure of the market, influence of scientific and technical progress and information and communication technologies on world centers as well as the emergence of the concept of «sustainable construction» in the course of humanity for sustainable development.

scholarly journals Geo-Environmental investigation of Sahure pyramid complex, Abusir Archeological site, Giza, Egypt

2021 ◽  
Author(s):  
Abdelrhman Muhamed Fahmy Sayed Ahmed ◽  
Fatma Muhamed Helmy
Keyword(s):  
Building Materials ◽  
Construction Materials ◽  
Polarized Light ◽  
Archaeological Site ◽  
Field Studies ◽  
Point Of View ◽  
Western Side ◽  
The Impact ◽  
Archeological Site ◽  
Engineering Stability

Abstract Abusir is the name of an elaborate burial area, dotted with 19 pyramids other temples, stretching on the western side of the Nile from the south of the Giza Plateau to the northern rim of Saqqara. It seems to have been created as the resting site for the Pharaos dated from 2494 to 2345 BC. The name Abusir, originally spoken as Busiri, means” temple of Osiris”. Over time, the name has become so popular, that more than 60 villages now carry this name. But only one is the archaeological site. This paper does not refer to all of the Abusir archaeological area, but focuses one of its most important sites: Sahure pyramid, one of Egypt’s little known, but heavily damaged treasure. One of the highlights of the relevant research is the discovery of a piece of cement (Basaltic mortar/concrete), which consists of several materials and which is harder than any cement produced today and detection of a clear and significant Anorthite mineral (Plagioclase) in the mortar sample which had been proven by XRD, XRF (analysis) and Polarized light microscope (investigation). The main objectives of this paper are 1) to reveal and identify the construction materials of the pyramid and the construction of the pyramid,2) to evaluate the durability and vulnerability of the Ancient construction materials of Sahure pyramid,3) to compare the decayed patterns of the different construction materials, 4) to study the pyramid building materials from geological, meteorological, geochemical, petrological and petrophysical point of view, and 5) to present a proposal for scientific conservation and protection of the pyramid. Laboratories and field studies have been carried out by researchers from various countries to investigate and understand the problems of the pyramid leading to the final results which confirmed the impact of the geo environment conditions on the structural and engineering stability of the pyramid.

scholarly journals Radiological and physico-chemical characterization of red mud as an Al-containing precursor in inorganic binders for the building industry

2021 ◽  
Vol 36 (2) ◽  
pp. 182-191
Author(s):  
Ljiljana Kljajevic ◽  
Miljana Mirkovic ◽  
Sabina Dolenec ◽  
Katarina Ster ◽  
Mustafa Hadzalic ◽  
...  
Keyword(s):  
Construction Industry ◽  
Natural Radioactivity ◽  
Red Mud ◽  
Building Materials ◽  
Raw Materials ◽  
Construction Materials ◽  
Polymerization Process ◽  
Alkali Activation ◽  
Silica Alumina ◽  
Alkali Activated

The potential re-use of red mud in the building and construction industry has been the subject of research of many scientists. The presented research is a contribution to the potential solution of this environmental issue through the synthesis of potential construction materials based on red mud. A promising way of recycling these secondary raw materials is the synthesis of alkali-activated binders or alkali activated materials. Alkali-activated materials or inorganic binders based on red mud are a new class of materials obtained by activation of inorganic precursors mainly constituted by silica, alumina and low content of calcium oxide. Since red mud contains radioactive elements like 226Ra and 232Th, this may be a problem for its further utilization. The content of naturally occurring radionuclides in manufactured material products with potential application in the building and construction industry is important from the standpoint of radiation protection. Gamma radiation of the primordial radionuclides, 40K and members of the uranium and thorium series, increases the external gamma dose rate. However, more and more precedence is being given to limiting the radiological dose originating from building materials on the population these days. The aim of this research was to investigate the possible influence of alkali activation-polymerization processes on the natural radioactivity of alkali activated materials synthesized by red mud (BOKSIT a. d. Milici, Zvornik, Bosnia and Herzegovina) and their structural properties. This research confirmed that during the polymerization process the natural radioactivity was reduced, and that the process of alkali activation of raw materials has an influence on natural radioactivity of synthesized materials.

scholarly journals Finite Element Analysis of Beams Reinforced with Banana Fiber Bars (BFB)

Fibers ◽  
2020 ◽  
Vol 8 (8) ◽  
pp. 52 ◽  
Author(s):  
Amgad Elbehiry ◽  
Marwan Mostafa
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Building Materials ◽  
Natural Fibers ◽  
Construction Materials ◽  
Element Analysis ◽  
Banana Fiber ◽  
Finite Element Program ◽  
Element Program

One of the challenges of the century is to reach compatibility between the required resistance and the usage of lightweight building materials that may negatively affect the mechanical properties. Natural fibers nowadays are used as enhancers in the industrial field. Hence, the fibers contribute by giving an ideal solution to improve mechanical proprieties of the structural elements such as tensile and impact strength. In previous studies, the use of natural fibers as reinforcement in construction materials has increased. Natural fibers have a lot of characteristics such as being strong, lightweight, inexpensive, and eco-friendly. This paper aims to investigate the performance of banana fiber bars (BFB) as reinforced material. Through this study, the development and characterization of natural fibers-based composite beams were observed. After the beams were designed, several types of finite element analysis were conducted using ‘ANSYS’ nonlinear finite element program under one-point loading. Results show good correlations between experimental and predicted results.

Development of the Building Materials Market Research System

2020 ◽  
Vol 9 (1) ◽  
pp. 59-63
Author(s):  
Marina Mishlanova ◽  
A. Veleva
Keyword(s):  
Construction Industry ◽  
Market Research ◽  
Building Materials ◽  
Construction Materials ◽  
Direct Methods ◽  
Integrated Approach ◽  
Research System ◽  
Indirect Methods ◽  
Complex Process ◽  
Construction Products

The building materials market research is a complex process, one of the main problems of which is the collection and processing of information. The article presents a characteristic of the methods of analysis of this market. The aim of the study was to develop an integrated approach and methods for analyzing the building materials market to ensure the development of the construction materials sector and the construction industry as a whole. The analysis made it possible to develop indirect methods of market research based on indicators of realized demand and realized supply. The triune methodical complex includes: the method of material costs of the executor of construction and installation works, the method of economic results of the manufacturer of building materials and the analysis of the market of final construction products. The proposed indirect methods, combined with direct methods, constitute a system for researching the construction materials market.

Sign in / Sign up

Export Citation Format

Share Document