scholarly journals Turbulence Combined Convective Heat Transfer and Nanofluids Flows over Double Forward Facing Steps

2018 ◽  
Vol 225 ◽  
pp. 01007
Author(s):  
Omar Hussein ◽  
Khairul Habib ◽  
Mohammad Nasif ◽  
Ali Muhsan ◽  
Balaji Bakthavatchalam
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Volume Fraction ◽  
Simple Algorithm ◽  
Numerical Investigations ◽  
Different Types ◽  
Energy Equations ◽  
Volume Method ◽  
Fluid Characteristics

Predictions are reported for mixed convection using various types of nanofluids over forward-facing double steps in a duct. The continuity, momentum and energy equations are discretized and the simple algorithm is applied to link the pressure and flow fields inside the domain. Different types of nanoparticles Al2O3, CuO, SiO2 and ZnO, with different volume fractions in range of 1-4% are investigated to identify their effects on the heat transfer and fluid characteristics. Numerical investigations are conducted using finite volume method. The results indicate that SiO2 -water has the highest Nusselt number followed by Al2O3-water, CuO -water and ZnO-water. The Nusselt number increases as the volume fraction increases but decreases as the nanoparticles diameter increases.

Combined Convection Heat Transfer of Nanofluids Flow over Forward Facing Step in a Channel Having a Blockage

2013 ◽  
Vol 388 ◽  
pp. 185-191 ◽  
Author(s):  
Hussein A. Mohammed ◽  
Mohsen Golieskardi ◽  
K.M. Munisamy ◽  
Mazlan A. Wahid
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Simple Algorithm ◽  
Combined Convection ◽  
Reynolds Number Increase ◽  
Forward Facing Step ◽  
Energy Equations ◽  
Volume Method

Numerical simulations of two dimensional laminar combined convection flows using nanofluids over forward facing step with a blockage are analyzed. The continuity, momentum and energy equations are solved using finite volume method (FVM) and the SIMPLE algorithm scheme is applied to examine the effect of the blockage on the heat transfer characteristics. In this project, several parameters such as different types of nanofluids (Al2O3, SiO2, CuO and ZnO), different volume fraction in the range of 1% - 4%, different nanoparticles diameter in the range of 25nm-80nm were used. Effects of different shapes of blockage (Circular, Square and Triangular) were studied. The numerical results indicated that SiO2nanofluid has the highest Nusselt number. The Nusselt number increased as the volume fraction and Reynolds number increase, while it decreases as the nanoparticles diameter increases. Circular blockage produced higher results compared to triangular and square one.

scholarly journals Numerical Investigation of Heat Transfer Enhancement in a Rectangular Heated Pipe for Turbulent Nanofluid

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Hooman Yarmand ◽  
Samira Gharehkhani ◽  
Salim Newaz Kazi ◽  
Emad Sadeghinezhad ◽  
Mohammad Reza Safaei
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Volume Fraction ◽  
Rectangular Channel ◽  
Thermal Characteristics ◽  
Reynolds Numbers ◽  
Constant Heat Flux ◽  
Energy Equations ◽  
Volume Method ◽  
Good Agreement

Thermal characteristics of turbulent nanofluid flow in a rectangular pipe have been investigated numerically. The continuity, momentum, and energy equations were solved by means of a finite volume method (FVM). The symmetrical rectangular channel is heated at the top and bottom at a constant heat flux while the sides walls are insulated. Four different types of nanoparticles Al2O3, ZnO, CuO, and SiO2at different volume fractions of nanofluids in the range of 1% to 5% are considered in the present investigation. In this paper, effect of different Reynolds numbers in the range of 5000 < Re < 25000 on heat transfer characteristics of nanofluids flowing through the channel is investigated. The numerical results indicate that SiO2-water has the highest Nusselt number compared to other nanofluids while it has the lowest heat transfer coefficient due to low thermal conductivity. The Nusselt number increases with the increase of the Reynolds number and the volume fraction of nanoparticles. The results of simulation show a good agreement with the existing experimental correlations.

Numerical analysis of mixed convection of different nanofluids in concentric annulus

2019 ◽  
Vol 29 (4) ◽  
pp. 1506-1525 ◽  
Author(s):  
Ahad Abedini ◽  
Saeed Emadoddin ◽  
Taher Armaghani
Keyword(s):  
Heat Transfer ◽  
Mixed Convection ◽  
Flow Pattern ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Simple Algorithm ◽  
Content Type ◽  
Volume Method

Purpose This study aims to investigate the numerical analysis of mixed convection within the horizontal annulus in the presence of water-based fluid with nanoparticles of aluminum oxide, copper, silver and titanium oxide. Numerical solution is performed using a finite-volume method based on the SIMPLE algorithm, and the discretization of the equations is generally of the second order. Inner and outer cylinders have a constant temperature, and the inner cylinder temperature is higher than the outer one. The two cylinders can be rotated in both directions at a constant angular velocity. The effect of parameters such as Rayleigh, Richardson, Reynolds and the volume fraction of nanoparticles on heat transfer and flow pattern are investigated. The results show that the heat transfer rate increases with the increase of the Rayleigh number, as well as by increasing the volume fraction of the nanoparticles, the heat transfer rate increases, and this increase is about 8.25 per cent for 5 per cent volumetric fraction. Rotation of the cylinders reduces the overall heat transfer. Different directions of rotation have a great influence on the flow pattern and isotherms, and ultimately on heat transfer. The addition of nanoparticles does not have much effect on the flow pattern and isotherms, but it is quantitatively effective. The extracted results are in good agreement with previous works. Design/methodology/approach Studying mixed convection heat transfer in the horizontal annulus in the presence of a water-based fluid with aluminum oxide, copper, silver and titanium oxide nanoparticles is carried out quantitatively using a finite-volume method based on the SIMPLE algorithm. Findings Increasing the Rayleigh number increases the Nusselt number. Increasing the Richardson number increases heat transfer. Adding nanoparticles does not have much effect on the flow pattern but is effective quantitatively on heat transfer parameters. The addition of nanoparticles sometimes increases the heat transfer rate by about 8.25 per cent. In constant Rayleigh numbers, increasing the Reynolds number reduces heat transfer. The Rayleigh and Reynolds numbers greatly affect the isotherms and streamlines. In addition to the thermal conductivity of nanoparticles, the thermo-physical properties of nanoparticles has great effect in the formation of isotherms and streamlines and ultimately heat transfer. Originality/value Studying the effect of different direction of rotation on the isotherms and streamlines, as well as the comparison of different nanoparticles on mixed convection heat transfer in annulus.

Effect of Nanofluid on Heat Transfer Enhancement for Mixed Convection Flow Over a Corrugated Surface

2020 ◽  
Vol 45 (4) ◽  
pp. 373-383
Author(s):  
Nepal Chandra Roy ◽  
Sadia Siddiqa
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Local Nusselt Number ◽  
Richardson Number ◽  
Thermal Boundary Layer ◽  
Volume Fraction ◽  
Convection Flow ◽  
Mixed Convection Flow

AbstractA mathematical model for mixed convection flow of a nanofluid along a vertical wavy surface has been studied. Numerical results reveal the effects of the volume fraction of nanoparticles, the axial distribution, the Richardson number, and the amplitude/wavelength ratio on the heat transfer of Al2O3-water nanofluid. By increasing the volume fraction of nanoparticles, the local Nusselt number and the thermal boundary layer increases significantly. In case of \mathrm{Ri}=1.0, the inclusion of 2 % and 5 % nanoparticles in the pure fluid augments the local Nusselt number, measured at the axial position 6.0, by 6.6 % and 16.3 % for a flat plate and by 5.9 % and 14.5 %, and 5.4 % and 13.3 % for the wavy surfaces with an amplitude/wavelength ratio of 0.1 and 0.2, respectively. However, when the Richardson number is increased, the local Nusselt number is found to increase but the thermal boundary layer decreases. For small values of the amplitude/wavelength ratio, the two harmonics pattern of the energy field cannot be detected by the local Nusselt number curve, however the isotherms clearly demonstrate this characteristic. The pressure leads to the first harmonic, and the buoyancy, diffusion, and inertia forces produce the second harmonic.

scholarly journals The Influence of Different Types of Nanofluid on Thermal and Fluid Flow Performance of Liquid Cold Plate

2018 ◽  
Vol 7 (4.35) ◽  
pp. 148 ◽  
Author(s):  
Nur Irmawati Om ◽  
Rozli Zulkifli ◽  
P. Gunnasegaran
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Steady State ◽  
Pressure Drop ◽  
Volume Fraction ◽  
Cold Plate ◽  
Governing Equations ◽  
Flow And Heat Transfer ◽  
Different Types ◽  
Volume Method

The influence of utilizing different nanofluids types on the liquid cold plate (LCP) is numerically investigated. The thermal and fluid flow performance of LCP is examined by using pure ethylene glycol (EG), Al2O3-EG and CuO-EG. The volume fraction of the nanoparticle for both nanofluid is 2%. The finite volume method (FVM) has been used to solved 3-D steady state, laminar flow and heat transfer governing equations. The presented results indicate that Al2O3-EG able to provide the lowest surface temperature of the heater block followed by CuO-EG and EG, respectively. It is also found that the pressure drop and friction factor are higher for Al2O3-EG and CuO-EG compared to the pure EG.

scholarly journals Mixed Convection and Entropy Generation of an Ag-Water Nanofluid in an Inclined L-Shaped Channel

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1150 ◽  
Author(s):  
Taher Armaghani ◽  
Muneer Ismael ◽  
Ali Chamkha ◽  
Ioan Pop
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Richardson Number ◽  
Volume Fraction ◽  
Governing Equations ◽  
Nanoparticles Volume Fraction ◽  
The Mean ◽  
The Right ◽  
Volume Method

This paper investigates the mixed convection and entropy generation of an Ag-water nanofluid in an L-shaped channel fixed at an inclination angle of 30° to the horizontal axis. An isothermal heat source was positioned in the middle of the right inclined wall of the channel while the other walls were kept adiabatic. The finite volume method was used for solving the problem’s governing equations. The numerical results were obtained for a range of pertinent parameters: Reynolds number, Richardson number, aspect ratio, and the nanoparticles volume fraction. These results were Re = 50–200; Ri = 0.1, 1, 10; AR = 0.5–0.8; and φ = 0.0–0.06, respectively. The results showed that both the Reynolds and the Richardson numbers enhanced the mean Nusselt number and minimized the rate of entropy generation. It was also found that when AR. increased, the mean Nusselt number was enhanced, and the rate of entropy generation decreased. The nanoparticles volume fraction was predicted to contribute to increasing both the mean Nusselt number and the rate of entropy generation.

scholarly journals Effects of a Rotating Cone on the Mixed Convection in a Double Lid-Driven 3D Porous Trapezoidal Nanofluid Filled Cavity under the Impact of Magnetic Field

Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 449 ◽  
Author(s):  
Ali J. Chamkha ◽  
Fatih Selimefendigil ◽  
Hakan F. Oztop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Mixed Convection ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Rotational Velocity ◽  
Rotating Cone ◽  
The Impact

Effects of a rotating cone in 3D mixed convection of CNT-water nanofluid in a double lid-driven porous trapezoidal cavity is numerically studied considering magnetic field effects. The numerical simulations are performed by using the finite element method. Impacts of Richardson number (between 0.05 and 50), angular rotational velocity of the cone (between −300 and 300), Hartmann number (between 0 and 50), Darcy number (between 10 − 4 and 5 × 10 − 2 ), aspect ratio of the cone (between 0.25 and 2.5), horizontal location of the cone (between 0.35 H and 0.65 H) and solid particle volume fraction (between 0 and 0.004) on the convective heat transfer performance was studied. It was observed that the average Nusselt number rises with higher Richardson numbers for stationary cone while the effect is reverse for when the cone is rotating in clockwise direction at the highest supped. Higher discrepancies between the average Nusselt number is obtained for 2D cylinder and 3D cylinder configuration which is 28.5% at the highest rotational speed. Even though there are very slight variations between the average Nu values for 3D cylinder and 3D cone case, there are significant variations in the local variation of the average Nusselt number. Higher enhancements in the average Nusselt number are achieved with CNT particles even though the magnetic field reduced the convection and the value is 84.3% at the highest strength of magnetic field. Increasing the permeability resulted in higher local and average heat transfer rates for the 3D porous cavity. In this study, the aspect ratio of the cone was found to be an excellent tool for heat transfer enhancement while 95% enhancements in the average Nusselt number were obtained. The horizontal location of the cone was found to have slight effects on the Nusselt number variations.

Laminar Mixed Convection of Non-Newtonian Nanofluids Flowing Vertically Upward Across a Confined Circular Cylinder

2018 ◽  
Vol 10 (4) ◽  
Author(s):  
Abhipsit Kumar Singh ◽  
Nanda Kishore
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Circular Cylinder ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Numerical Results ◽  
Total Drag ◽  
Drag Coefficients

Numerical results on laminar mixed convective heat transfer phenomenon between a confined circular cylinder and shear-thinning type nanofluids are presented. The cylinder is placed horizontally in a confined channel through which nanofluids flow vertically upward. The effect of buoyancy is same as the direction of the flow. Because of existence of mixed convection, governing continuity, momentum, and energy equations are simultaneously solved within the limitations of Boussinesq approximation. The ranges of parameters considered are: volume fraction of nanoparticles, ϕ = 0.005–0.045; Reynolds number, Re = 1–40; Richardson number, Ri = 0–40; and confinement ratio of circular cylinder, λ = 0.0625–0.5. Finally, the effects of these parameters on the streamlines, isotherm contours, individual and total drag coefficients, and local and average Nusselt numbers are thoroughly delineated. The individual and total drag coefficients decrease with the increasing both ϕ and Re; and/or with the decreasing both Ri and λ. The rate of heat transfer increases with the increasing Re, ϕ, Ri, and λ; however, at Re = 30–40, when ϕ > 0.005 and Ri < 2, the average Nusselt number decreases with the increasing Richardson number. Finally, correlations for the total drag coefficient and average Nusselt number are proposed as functions of pertinent dimensionless parameters on the basis of present numerical results.

Heat transfer and entropy generation analysis of Cu-water nanofluid in a vertical channel

2018 ◽  
Vol 15 (5) ◽  
pp. 604-613
Author(s):  
Essma Belahmadi ◽  
Rachid Bessaih
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Mixed Convection ◽  
Friction Factor ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Vertical Channel ◽  
Simple Algorithm ◽  
Content Type

Purpose The purpose of this study is to analyze heat transfer and entropy generation of a Cu-water nanofluid in a vertical channel. The channel walls are maintained at a hot temperature Tw. An up flow penetrates the channel at a uniform velocity v0 and a cold temperature T0 (T0 < Tw). The effects of Reynolds number Re, Grashof number Gr and solid volume fraction ϕ on streamlines, isotherms, entropy generation, friction factor, local and mean Nusselt numbers are evaluated. Design/methodology/approach The Cu-water nanofluid is used in this study. The software Ansys-fluent 14.5, based on the finite-volume method and SIMPLE algorithm, is used to simulate the mixed convection problem with entropy generation in a vertical channel. Findings The results show that the increase of Reynolds and Grashof numbers and solid volume fraction improves heat transfer and reduces entropy generation. Correlations for the mean Nusselt number and friction factor in terms of Reynolds number and solid volume fraction are obtained. The present results are compared with those found in the literature, which reveal a very good agreement. Originality/value The originality of this work is to understand the heat transfer and entropy generation for mixed convection of a Cu-water nanofluid in a vertical channel.

scholarly journals Numerical study on characteristics of flow and thermal fields around rotating cylinder

10.30544/450 ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 71-86
Author(s):  
Kamel Korib ◽  
Mohamed ROUDANE ◽  
Yacine Khelili
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Numerical Study ◽  
Simple Algorithm ◽  
Rotation Rates ◽  
Rotating Circular Cylinder ◽  
Flow And Heat Transfer ◽  
Lift And Drag ◽  
Energy Equations ◽  
Volume Method

In this paper, a numerical simulation has been performed to study the fluid flow and heat transfer around a rotating circular cylinder over low Reynolds numbers. Here, the Reynolds number is 200, and the values of rotation rates (α) are varied within the range of 0 < α < 6. Two-dimensional and unsteady mass continuity, momentum, and energy equations have been discretized using the finite volume method. SIMPLE algorithm has been applied for solving the pressure linked equations. The effect of rotation rates (α) on fluid flow and heat transfer were investigated numerically. Also, time-averaged (lift and drag coefficients and Nusselt number) results were obtained and compared with the literature data. A good agreement was obtained for both the local and averaged values.

Sign in / Sign up

Export Citation Format

Share Document