scholarly journals Mathematical modeling of plastic deformation of a tube from dispersion-hardened aluminum alloy

2018 ◽  
Vol 243 ◽  
pp. 00008 ◽  
Author(s):  
Oleg Matvienko ◽  
Olga Daneyko ◽  
Tatyana Kovalevskaya
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Plastic Deformation ◽  
External Pressure ◽  
Dislocation Loops ◽  
Balance Equations ◽  
Deformable Solid ◽  
Deformation Defects ◽  
Resistance Decrease ◽  
The Mathematical Model

The influence of the internal and external pressure subjected to the tube from dispersion-hardened aluminium alloy was investigated. The approach which combines methods of crystal plasticity and mechanics of deformable solid was used to explore the limits of elastic and plastic resistance. The mathematical model of plastic deformation includes balance equations for deformation defects with regard to the generation and annihilation of shear dislocations, vacancy and interstitial prismatic dislocation loops, and dislocations in dipole configurations of vacancy and interstitial types and also equilibrium equation, geometrical and physical relations between the deformations, displacements and stresses. It has been established that as the temperature increases, the limits of the elastic and plastic resistance decrease. Results of investigation demonstrate that the hardening the alloy by nanoparticles significantly improves the strength characteristics of the material.

Chaotic Phenomena Induced by the Fast Plastic Deformation of Metals During Cutting

2005 ◽  
Vol 73 (2) ◽  
pp. 240-245 ◽  
Author(s):  
Zoltan Palmai
Keyword(s):  
Mathematical Model ◽  
Plastic Deformation ◽  
Shear Stress ◽  
General Structure ◽  
Equation System ◽  
Qualitative Description ◽  
Balance Equations ◽  
Different Types ◽  
Energy Equations ◽  
The Mathematical Model

In the present study the examination of chip formation is focused on the primary shear zone, which is divided into two layers, and the variation of shear stress and temperature in time are given by two mechanical balance equations and three energy equations. All the five evolution differential equations are autonomous and nonlinear. The material characteristics are determined by an exponential constitutive equation. The mathematical model is suitable for the qualitative description of different types of chips, such as continuous chips and periodic or aperiodic shear localized chips, which is demonstrated by the general structure and typical solutions of the equation system.

Experimental Study and Mathematical Modeling of Development of Crystallographic Slip in Heterophase FCC Alloys

2014 ◽  
Vol 1013 ◽  
pp. 300-306
Author(s):  
Nina Grigorjeva ◽  
Olga Daneyko ◽  
Tatiana Kovalevskaya
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Experimental Study ◽  
Plastic Deformation ◽  
Experimental Results ◽  
Plastic Behavior ◽  
Crystallographic Slip ◽  
Fcc Alloys ◽  
Fcc Materials ◽  
The Mathematical Model

The experimental results of plastic behavior investigation of Al-6%Zn-3%Mg alloy are compared with the mathematical model of plastic deformation of dispersion hardened FCC materials with undeformed particles. Were determined the factors, when model properly describes the regularities of slip development in this alloy.

Methods of Mathematical Modeling of the Leaching Process of Cobalt-Containing Solutions

2021 ◽  
Vol 316 ◽  
pp. 661-666
Author(s):  
Nataliya V. Mokrova
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Chemical Kinetics ◽  
Group Method ◽  
Data Handling ◽  
Multistage Processes ◽  
Leaching Process ◽  
Proposed Model ◽  
Simulation Results ◽  
The Mathematical Model

Current cobalt processing practices are described. This article discusses the advantages of the group argument accounting method for mathematical modeling of the leaching process of cobalt solutions. Identification of the mathematical model of the cascade of reactors of cobalt-producing is presented. Group method of data handling is allowing: to eliminate the need to calculate quantities of chemical kinetics; to get the opportunity to take into account the results of mixed experiments; to exclude the influence of random interference on the simulation results. The proposed model confirms the capabilities of the group method of data handling for describing multistage processes.

A prey–predator model and control of a nematodes pest using control in banana: Mathematical modeling and qualitative analysis

2021 ◽  
pp. 2150089
Author(s):  
Sudhakar Yadav ◽  
Vivek Kumar
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Local Stability ◽  
Detection Method ◽  
Initial Release ◽  
Pest Detection ◽  
Predator Model ◽  
And Control ◽  
The Mathematical Model ◽  
Theoretical Results

This study develops a mathematical model for describing the dynamics of the banana-nematodes and its pest detection method to help banana farmers. Two criteria: the mathematical model and the type of nematodes pest control system are discussed. The sensitivity analysis, local stability, global stability, and the dynamic behavior of the mathematical model are performed. Further, we also develop and discuss the optimal control mathematical model. This mathematical model represents various modes of management, including the initial release of infected predators as well as the destroying of nematodes. The theoretical results are shown and verified by numerical simulations.

scholarly journals Population Behavior in the Mathematical Model of the Spread of COVID19 Type SEIRS

2021 ◽  
Vol 6 (2) ◽  
pp. 83-88
Author(s):  
Asmaidi As Med ◽  
Resky Rusnanda
Keyword(s):  
Mathematical Modeling ◽  
Numerical Simulation ◽  
Mathematical Model ◽  
Everyday Life ◽  
Applied Mathematics ◽  
Living Things ◽  
Simulation Results ◽  
Parameter Values ◽  
The Mathematical Model ◽  
Disease Free

Mathematical modeling utilized to simplify real phenomena that occur in everyday life. Mathematical modeling is popular to modeling the case of the spread of disease in an area, the growth of living things, and social behavior in everyday life and so on. This type of research is included in the study of theoretical and applied mathematics. The research steps carried out include 1) constructing a mathematical model type SEIRS, 2) analysis on the SEIRS type mathematical model by using parameter values for conditions 1and , 3) Numerical simulation to see the behavior of the population in the model, and 4) to conclude the results of the numerical simulation of the SEIRS type mathematical model. The simulation results show that the model stabilized in disease free quilibrium for the condition  and stabilized in endemic equilibrium for the condition .

scholarly journals Mathematical Modeling of Pollution Transfer in Open Channel

2019 ◽  
pp. 49-50
Author(s):  
Petro Martyniuk ◽  
Oksana Ostapchuk ◽  
Vitalii Nalyvaiko
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Numerical Solution ◽  
Boundary Problem ◽  
Water Flow ◽  
Numerical Experiments ◽  
Open Channel ◽  
Computational Algorithm ◽  
The Mathematical Model

The problem of pollution transfer by water flow in open channel was considered. The mathematical model of the problem was constructed. The numerical solution of the onedimensional boundary problem was obtained. The computational algorithm for solving the problem was programmed to implement. A series of numerical experiments with their further analysis was conducted.

scholarly journals THE MATHEMATICAL MODELING OF METALS CONTENT IN PEAT

2015 ◽  
Vol 1 ◽  
pp. 249
Author(s):  
Edmunds Teirumnieks ◽  
Ērika Teirumnieka ◽  
Ilmārs Kangro ◽  
Harijs Kalis
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Inductively Coupled Plasma ◽  
Optical Emission ◽  
Peat Bog ◽  
Inductively Coupled ◽  
Pollution Loading ◽  
The Mathematical Model ◽  
Optical Emission Spectrometer

Metals deposition in peat can aid to evaluate impact of atmospheric or wastewaters pollution and thus can be a good indicator of recent and historical changes in the pollution loading. For peat using in agriculture, industrial, heat production etc. knowledge of peat metals content is important. Experimental determination of metals in peat is very long and expensive work. Using experimental data the mathematical model for calculation of concentrations of metals in different points for different layers is developed. The values of the metals (Ca, Mg, Fe, Sr, Cu, Zn, Mn, Pb, Cr, Ni, Se, Co, Cd, V, Mo) concentrations in different layers in peat taken from Knavu peat bog from four sites are determined using inductively coupled plasma optical emission spectrometer. Mathematical model for calculation of concentrations of metal has been described in the paper. As an example, mathematical models for calculation of Pb concentrations have been analyzed.

scholarly journals Mathematical modeling and harmonic analysis of SISFCL

2017 ◽  
Vol 36 (1) ◽  
pp. 258-270
Author(s):  
Debraj Sarkar ◽  
Debabrata Roy ◽  
Amalendu Bikash Choudhury ◽  
Sotoshi Yamada
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Harmonic Analysis ◽  
Voltage Drop ◽  
Element Model ◽  
Iron Core ◽  
Content Type ◽  
Hysteresis Characteristic ◽  
The Core ◽  
The Mathematical Model

Purpose A saturated iron core superconducting fault current limiter (SISFCL) has an important role to play in the present-day power system, providing effective protection against electrical faults and thus ensuring an uninterrupted supply of electricity to the consumers. Previous mathematical models developed to describe the SISFCL use a simple flux density-magnetic field intensity curve representing the ferromagnetic core. As the magnetic state of the core affects the efficient working of the device, this paper aims to present a novel approach in the mathematical modeling of the device with the inclusion of hysteresis. Design/methodology/approach The Jiles–Atherton’s hysteresis model is utilized to develop the mathematical model of the limiter. The model is numerically solved using MATLAB. To support the validity of model, finite element model (FEM) with similar specifications was simulated. Findings Response of the limiter based on the developed mathematical model is in close agreement with the FEM simulations. To illustrate the effect of the hysteresis, the responses are compared by using three different hysteresis characteristics. Harmonic analysis is performed and comparison is carried out utilizing fast Fourier transform and continuous wavelet transform. It is observed that the core with narrower hysteresis characteristic not only produces a better current suppression but also creates a higher voltage drop across the DC source. It also injects more harmonics in the system under fault condition. Originality/value Inclusion of hysteresis in the mathematical model presents a more realistic approach in the transient analysis of the device. The paper provides an essential insight into the effect of the core hysteresis characteristic on the device performance.

Experimental and Theoretical Investigation of Performance of a Solar Chimney Model Part II: Model Development and Validation

2021 ◽  
Vol 5 (2) ◽  
Author(s):  
Ibrahim A Abuashe ◽  
Bashir H Arebi ◽  
Essaied M Shuia
Keyword(s):  
Mathematical Model ◽  
Power Output ◽  
Model Development ◽  
Geometrical Parameters ◽  
Balance Equations ◽  
Solar Chimney ◽  
And Performance ◽  
Development And Validation ◽  
The Mathematical Model ◽  
Good Agreement

A mathematical model based on the momentum, continuity and energy balance equations was developed to simulate the behavior of the air flow inside the solar chimney system. The model can estimate the power output and performance of solar chimney systems. The developed mathematical model is validated by the experimental data that were collected from small pilot solar chimney; (experiment was presented in part I). Good agreement was obtained between the experimental results and that from the mathematical model. The model can be used to analyze the solar chimney systems and to determine the effect of geometrical parameters such as chimney height and collector diameter on the power output and the efficiency of the system

Mathematical Modeling of Steppe Fires

2020 ◽  
pp. 48-62 ◽  
Author(s):  
Valeriy Afanasievich Perminov
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Wind Speed ◽  
Vegetation Cover ◽  
Meteorological Conditions ◽  
Condensed Phases ◽  
Pyrolysis Products ◽  
Rate Of Spread ◽  
The Mathematical Model ◽  
Steppe Fires

The chapter presents a mathematical model of the initiation and spread of the steppe fire. The mathematical model is based on the laws of mechanics of multiphase reacting media. The main physicochemical processes describing the drying, pyrolysis, and combustion of gaseous and condensed pyrolysis products are taken into account. As a result of the numerical solution, the distributions of the velocity, temperature, and concentration fields of the components of the gas and condensed phases were determined. The dependence of the rate of spread of the steppe fire on the main parameters of the state of vegetation cover and wind speed was studied. The mathematical model presented in the chapter can be used to predict the spread of steppe fires for various types of steppe vegetation and meteorological conditions, as well as for preventive measures.

Sign in / Sign up

Export Citation Format

Share Document