scholarly journals Fine-grained concrete with combined reinforcement by different types of fibers

2018 ◽  
Vol 245 ◽  
pp. 03006 ◽  
Author(s):  
Sergey Klyuev ◽  
Alexander Klyuev ◽  
Nikolai Vatin
Keyword(s):  
Compressive Strength ◽  
Magnetic Anomaly ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Kursk Magnetic Anomaly ◽  
Fine Grained ◽  
Fibre Concrete ◽  
Strength And Deformation ◽  
The Cost ◽  
Selection Of

The article deals with the application of combined reinforcement of fi-ne-grained concrete with steel wave and polypropylene fibers. High-density packaging of the mixture components was used to improve the strength and deformation characteristics. In order to reduce the cost of fibre concrete, composite binders were developed. Rational selection of filler and the use of a steel wave fiber gave the opportunity to get the fibre concrete with tensile compressive strength – 84.8 MPa, the tensile strength in bending – 19.8 MPa on technogenic sands of the Kursk Magnetic Anomaly. With combined reinforcement by steel and polypropylene fiber on technogenic sands of the Kursk magnetic anomaly fibre concrete with a tensile compressive strength – 82.8 MPa, in bending – 19.1 MPa was developed. With the same strength charac-teristics the developed mixture of fibre concrete based on combined re-inforcement due to reducing the amount of steel fiber at cost is lower by 25% compared to the composition on steel fiber and the same com-posite binder.

Mechanical Properties of Fiber Reinforced Lightweight Aggregate Concrete

2011 ◽  
Vol 477 ◽  
pp. 274-279 ◽  
Author(s):  
Yi Xu ◽  
Lin Hua Jiang ◽  
Hong Qiang Chu ◽  
Lei Chen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Water Hyacinth ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Lightweight Aggregate ◽  
Splitting Tensile Strength ◽  
Lightweight Aggregate Concrete ◽  
Fiber Types

In this study, the effects of fiber types on the mechanical properties of lightweight aggregate concretes were investigated. Three types of fibers, namely, polypropylene fiber, steel fiber and water hyacinth (Eichhornia crassipes) fiber, and two types of lightweight aggregates, namely, expanded polystyrene and ceramsite were used. The compressive strength and splitting tensile strength of concretes were tested. The results show that both the compressive strength and the splitting tensile strength were improved by adding a reasonable volume of steel fiber and polypropylene fiber into LWAC. The addition of water hyacinth fiber had little effect on the compressive strength of LWAC, while a little increase was observed in the splitting tensile strength.

Orthogonal Experimental Study on Properties of Hybrid Fiber Reinforced Cement Mortar

2010 ◽  
Vol 168-170 ◽  
pp. 456-459
Author(s):  
Hai Yan Yuan ◽  
Shui Zhang ◽  
Guo Zhong Li
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Steel Fiber ◽  
Cement Mortar ◽  
Polypropylene Fiber ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Factors Affecting ◽  
Fiber Fraction ◽  
Reinforced Cement

By adopting the method of orthogonal experimental design, the effect of three independent variables, that is steel fiber fraction, polypropylene fiber fraction and silica fume fraction on the compressive strength, flexural strength and shrinkage of cement mortar was studied. The results indicate that steel fiber is one of the most important factors affecting compressive strength and shrinkage, and polypropylene fiber is one of the most important factors affecting flexural strength and shrinkage of cement mortar. By using deviation analysis to analyze the orthogonal experiment results, the optimized mix proportion of hybrid fiber reinforced cement mortar is determined. The hybrid effect of steel fiber and polypropylene fiber on the properties of cement mortar is discussed.

Mechanical Properties of Fiber Reinforced Self-Compacting Concrete

2013 ◽  
Vol 470 ◽  
pp. 797-801 ◽  
Author(s):  
Wu Jian Long ◽  
Han Xin Lin ◽  
Zhen Rong Chen ◽  
Kai Long Zhang ◽  
Wei Lun Wang
Keyword(s):  
Compressive Strength ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Performance Testing ◽  
The Self ◽  
Self Compacting Concrete ◽  
Curing Period ◽  
Polyethylene Fiber ◽  
Mechanics Performance ◽  
Mechanical Strengths

The mechanical strengths of self-compacting concrete (SCC) with different strengths and different fibers were investigated. By mechanics performance testing on concrete samples, it shows that the fiber can significantly reduce strength of the self-compacting concrete during curing period. The 28d tensile strength of self-compacting concrete can be improved when steel fiber, polypropylene fiber, or polyethylene fiber were used. Moreover, steel fiber can improve the 28d compressive strength; contrarily, polypropylene fiber and polyethylene fiber can reduce the 28d compressive strength.

Experimental Study on Axial Tensile Strength of Low Volume Fraction of Ternary Hybrid Fiber Reinforced Concrete

2014 ◽  
Vol 906 ◽  
pp. 329-334
Author(s):  
Yu Ting Zhu ◽  
Dong Tao Xia ◽  
Bo Ru Zhou
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Strength Test ◽  
Splitting Tensile Strength ◽  
National Standard ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Advantages And Disadvantages

In this paper, according to the national standard and testing methods,the direct tension strength,splitting tensile strength and cubic compressive strength test were carried out for 8 different groups of hybrid fiber (containing steel fiber, macro-polypropylene fiber and dura fiber) reinforced HPC specimens.The results showed that when the volume proportion of ternary hybrid fiber was less than 1%, there was not obvious influence for the concrete compressive strength, but the splitting tensile strength increased by 26% ~ 69%; the ratio between splitting tensile strength and compressive strength for HFRC increased to 1/12~1/9. When added 0.7% steel fiber, 0.19% macro-polypropylene fiber and 0.11% dura fiber, the confounding effect was the best. Based on the advantages and disadvantages of tensile splitting strength and direct tensile strength test and the results of tests, the concept of equivalent tensile strength and calculative formula was put forward .

scholarly journals Research on compressive strength of hybrid fiber reinforced concrete based on orthogonal design

2021 ◽  
Vol 261 ◽  
pp. 02019
Author(s):  
Tu-Sheng He ◽  
Meng-Qian Xie ◽  
Yang Liu ◽  
San-Yin Zhao ◽  
Zai-Bo Li
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Prediction Model ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Concrete Compressive Strength ◽  
Hybrid Fiber

The influence of steel fiber and polypropylene fiber mixed on compressive strength of high performance concrete (HPC) was studied. The steel fiber content (0.5%, 1.0%, 1.5%, 2.0%) (volume fraction, the same below), polypropylene fiber content (0.05%, 0.1%, 0.15%, 0.2%) and length (5mm, 6.5mm, 12mm, 18mm) were studied by L16 (45) orthogonal test for 28d ages, the range analysis and variance analysis of the test results are carried out, and the prediction model of compressive strength of hybrid fiber reinforced concrete was established. The results show that: The significant influence factor of concrete compressive strength is the volume fraction of polypropylene fiber, while the length of polypropylene fiber and the volume fraction of steel fiber are not significant; the concrete compressive strength with polypropylene fiber shows negative hybrid effect; The prediction model of compressive strength of hybrid fiber reinforced concrete has high accuracy, and the average relative errors is 2.96%.

Fiber Concrete for Industrial and Civil Construction

2019 ◽  
Vol 945 ◽  
pp. 120-124 ◽  
Author(s):  
Sergey V. Klyuev ◽  
T.A. Khezhev ◽  
Yu.V. Pukharenko ◽  
A.V. Klyuev
Keyword(s):  
Steel Fiber ◽  
Building Structures ◽  
Deformation Characteristics ◽  
Fine Grained ◽  
Fiber Concrete ◽  
Concrete Mix ◽  
Strength And Deformation ◽  
Reinforcing Fiber ◽  
Industrial Sand ◽  
Optimal Type

In the article the questions of application of a steel fiber for disperse reinforcing of fine-grained concrete are considered. Main filler of a fiber concrete mix was the KMA industrial sand enriched with sand. The carried-out researches showed advantage of a steel wave fiber before the anchor and flat milled. The optimal type of fiber is revealed, in which the greatest increase of strength and deformation characteristics is observed. Thus, it can be concluded that the type of steel reinforcing fiber and its shape have a significant impact on the length of building structures and buildings as a whole.

scholarly journals PEMANFAATAN LIMBAH BUBUT BESI PADA BETON SERAT DITINJAU DARI KUAT TEKAN DAN KUAT LENTUR

2020 ◽  
Vol 13 (2) ◽  
pp. 93
Author(s):  
Ikrar Hanggara, ST., MT
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Steel Fiber ◽  
Strength Test ◽  
Fine Aggregate ◽  
Flexure Strength ◽  
Compressive Strength Test ◽  
Fiber Concrete ◽  
Engineering State ◽  
The Cost

The practice of steel lathing by students of Mechanical Engineering State Polytechnic of Malang produces an abundant amount of steel fiber waste. In this research steel fiber was utilized to substitute coarse aggregate in fiber concrete mixture. The purpose of this research is to find out the compressive and flexure strengths of fiber concrete carried out at Material Laboratory Civil Engineering Politeknik Negeri Malang, and to estimate the cost. The required data were of the results of coarse aggregate and fine aggregate tests, and physical cutting of steel lathing waste. Mix design concrete referred to SNI 03-2834-2000. Compressive strength test used 54 cylindrical specimens of Ø15 x 30cm varied at 0%, 5%, and 10% substitutions. Tests were carried out on concrete aged 7, 14, and 28 days. The flexural strength test used 6 beam specimens of 15 x 15 x 60cm varied at 0%, 5%, and 10% substitution. Tests were carried out on 28 days of concrete. The experiment resulted in 39.01 Mpa  compressive strength at 0% variation; 24.54  Mpa  compressive strength at 5% variation; 21.80 Mpa  compressive strength at 10% variation; in 3.87 Mpa  flexure strength at 0% substitution; 4.27 Mpa  flexure strength at 5% substitution; 4.07 Mpa  flexure strength at 10% substitution. The greatest result of flexure strength test occured at 5% variation; at Rp.940,276/m3 at 0% variation and at Rp.938,719/m3 at 5% variation or 0.2 % decrease. Key word : Steel lathe waste, compressive strength, flexure strength

The Fiber-Reinforced Concrete Constructions Experimental Research

2018 ◽  
Vol 931 ◽  
pp. 598-602 ◽  
Author(s):  
Sergey V. Klyuev ◽  
Tolya A. Khezhev ◽  
Yu.V. Pukharenko ◽  
A.V. Klyuev
Keyword(s):  
Chemical Composition ◽  
Mechanical Characteristics ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
High Quality ◽  
Fine Grained ◽  
Fibre Concrete ◽  
Operational Characteristics ◽  
Physical And Mechanical Characteristics

The article proves the efficiency of the construction-based use of fibre concrete. The technique of high-quality fine-grained fibre concrete creation is presented. The chemical composition of the binder was studied and the physical and mechanical characteristics of the filler were revealed. 2 types of steel fibers were studied: anchor and in the form of a fir-tree. The conducted studies proved the effectiveness of dispersed reinforcement with steel fiber. It is established, that the usage of fiber in the form of a fir-tree the greatest increase of operational characteristics is reached.

scholarly journals Testing Deformation and Compressive Strength of the Frozen Fine-Grained Soils with Changed Porosity and Density

2021 ◽  
Vol 11 (2) ◽  
pp. 113-120
Author(s):  
V. Lemenkov ◽  
Polina Lemenkova
Keyword(s):  
Compressive Strength ◽  
Frozen Soil ◽  
External Effects ◽  
Frozen Soils ◽  
Load Pressure ◽  
Temperature Changes ◽  
Fine Grained ◽  
External Conditions ◽  
Loam Soil ◽  
Strength And Deformation

Abstract Current paper focuses on the laboratory experiments performed wit aim to test the deformation in the frozen loam soil specimens. Loam frozen soils are subject to the external effects, such as climate and environmental impacts including temperature changes. Soil heave is one of the key features restraining possible area development: construction of buildings, roads and railways. Necessarily, this requires the improvements of methods of the assessment of heave. This research evaluated the compressive strength and deformation in several specimens of the frozen soil. The approach included varying load and physical properties of soil specimens: porosity, pore filling, moisture, density of soil particles and dry soil density. Besides during the experiment, the external conditions were changed: decreased temperature and increased load pressure. The experiment is based on the UPG-MG4-01. The paper presented the laboratory tests of heave and compressive strength of the frozen soils using applied geotechnical methods.

Sign in / Sign up

Export Citation Format

Share Document