scholarly journals Analysis of embankment slope stability: the comparison of finite element limit analysis with limit equilibrium methods

2019 ◽  
Vol 270 ◽  
pp. 02004
Author(s):  
Kongkit Yingchaloenkitkhajorn
Keyword(s):  
Finite Element ◽  
Slope Stability ◽  
Limit Analysis ◽  
Limit Equilibrium ◽  
Slope Angle ◽  
Friction Angle ◽  
Volume Element ◽  
Stability Number ◽  
Limit Equilibrium Methods ◽  
Embankment Slope

This paper presented the analysis of embankment slope stability by considering the problem of embankment slope stability with special effects that it was filled with sand and was placed on purely cohesive clay. The finite element limit analysis of two-dimensional plane strain was employed to analyze the stability of this problem. The embankment slope height (H), the depth factors (d/H) and the embankment slope angle (β) for the finite element limit analysis of sand was modeled as a volume element with the properties of Mohr-Coulomb material in drained condition. And the clay was modeled as a volume element with the properties of Tresca material in undrained condition where the parameters were soil unit weight (γ), undrained shear strength (su) and friction angle (φ′). Parametric studies consisted of three dimensionless variables including depth factors (d/H), friction angle (φ′) and embankment slope angle (β). Results were summarized in the form of the dimensionless stability number (su/γH(FS)) and the design chart and application were presented. In addition, the comparison of the solution of stability number with the limit equilibrium methods and the failure mechanisms were also proposed in this paper.

scholarly journals Sensitivity Analysis of Influencing Factors of Building Slope Stability Based on Orthogonal Design and Finite Element Calculation

2018 ◽  
Vol 53 ◽  
pp. 03076
Author(s):  
RUAN Jin-kui ◽  
ZHU Wei-wei
Keyword(s):  
Finite Element ◽  
Slope Stability ◽  
Design Method ◽  
Orthogonal Design ◽  
Slope Angle ◽  
Friction Angle ◽  
Range Analysis ◽  
Factors Affecting ◽  
Orthogonal Test Design ◽  
The Stability

In order to study the sensitivity of factors affecting the homogeneous building slope stability, the orthogonal test design method and shear strength reduction finite element method were used. The stability safety factor of the slope was used as the analysis index, and the range analysis of results of 18 cases were carried out. The results show that the order of sensitivity of slope stability factors is: internal friction angle, slope height, cohesion, slope angle, bulk density, elastic modulus, Poisson's ratio. The analysis results have reference significance for the design and construction of building slope projects.

Earthquake Impact Analyses on Slopes Using Finite Element and Limit Equilibrium Methods

2010 ◽  
Vol 163-167 ◽  
pp. 3868-3871
Author(s):  
Yu Hwang Ong ◽  
Anuar Kasa ◽  
Zamri Chik ◽  
Taha Mohd Raihan
Keyword(s):  
Finite Element ◽  
Factor Of Safety ◽  
Limit Equilibrium ◽  
Friction Angle ◽  
Determine Factor ◽  
Earthquake Activity ◽  
Limit Equilibrium Methods ◽  
Dynamic Analyses ◽  
Cut Slopes ◽  
Steep Slopes

The objective of this research is to determine factor of safety for various cut slopes under the influence of earthquake activity. Finite element method was used to generate initial static stress condition and run dynamic analyses of the cut slopes. Factor of safety was then calculated using limit equilibrium method. Both sand and clay were analyzed in this study. The results show that steep slopes with initial safety factor of 1.5 are capable to sustain earthquake magnitude of 0.25g due to high shear strength of the soil. However, slopes with friction angle less than 21º for sand and cohesion value less than 38 kPa for clay are not stable. This shows that earthquake loading should be considered in the design of cut slopes in Malaysia.

Stability analysis of two-dimensional excavated slopes considering strength anisotropy

2002 ◽  
Vol 39 (5) ◽  
pp. 1026-1038 ◽  
Author(s):  
Jeaan Hwang ◽  
Mandar Dewoolkar ◽  
Hon-Yim Ko
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Stability Analysis ◽  
Slope Stability ◽  
Slip Surface ◽  
Slope Angle ◽  
Friction Angle ◽  
Strength Anisotropy ◽  
Extension Zone ◽  
Element Method

Using the finite element method, a cohesive horizontal ground is sequentially excavated until the stress state along a potential slip surface of the excavated slope reaches the critical state. Mobilized friction angle and stress ratio contours in the slope generated by the finite element solution are examined to quantify the part of the slip surface that undergoes extension resulting in anisotropic conditions. The effects of factors such as excavation depths, drainage boundary conditions, slope angles, and initial stress conditions on slope stability are investigated. It is shown that excavated slopes display anisotropic behavior and that the consideration of strength anisotropy in slope stability analysis is essential. For the example considered, it was found that the extent of the extension zone of the slip surface increases as the slope angle decreases and that this relationship is linear.Key words: slope stability, strength anisotropy, finite element method, limiting equilibrium.

scholarly journals Semi Empirical Slope Stability Analyses of Mohmand Dam using Limit Equilibrium and Finite Element Methods

2021 ◽  
Author(s):  
Muhammad Salman Babar ◽  
Jahanzaib Israr ◽  
Umair Ali ◽  
Gang Zhang
Keyword(s):  
Finite Element ◽  
Stability Analysis ◽  
Slope Stability ◽  
Limit Equilibrium ◽  
Construction Material ◽  
Slope Stability Analysis ◽  
Capital City ◽  
Earthquake Loading ◽  
Limit Equilibrium Methods ◽  
Semi Empirical

Abstract This study presents a framework for semi-empirical slope stability analysis of Mohmand dam, an important ongoing mega concrete faced rockfill dam hydropower project in Pakistan. The project comprises of 213 m high hybrid dam that will produce 800 megawatt of clean hydropower energy in addition to an effective flood mitigation. Also, it will supply water for both irrigation and drinking to the provincial capital city, Peshawar. In this study, finite element and limit equilibrium methods have been used for slope stability analysis and factors of safety have been computed for all anticipated loading conditions including earthquake loading. The rockfill samples of main dam were obtained from the construction material site of Mohmand dam and the input parameters for slope stability analysis were obtained both empirically and through laboratory testing. Results of both limit equilibrium and finite element analyses have been compared and it was observed that the latter is more conservative than the former except for earthquake loading. The implications of current findings have been demonstrated using an important case study of an independent dam site that would boost the confidence of practitioners.

Some difficulties associated with the limit equilibrium method of slices

1983 ◽  
Vol 20 (4) ◽  
pp. 661-672 ◽  
Author(s):  
R. K. H. Ching ◽  
D. G. Fredlund
Keyword(s):  
Slope Stability ◽  
Factor Of Safety ◽  
Limit Equilibrium ◽  
Stability Limit ◽  
Limit Equilibrium Method ◽  
Soil Conditions ◽  
Side Force ◽  
Limit Equilibrium Methods ◽  
Equilibrium Method ◽  
The Stability

Several commonly encountered problems associated with the limit equilibrium methods of slices are discussed. These problems are primarily related to the assumptions used to render the inherently indeterminate analysis determinate. When these problems occur in the stability computations, unreasonable solutions are often obtained. It appears that problems occur mainly in situations where the assumption to render the analysis determinate seriously departs from realistic soil conditions. These problems should not, in general, discourage the use of the method of slices. Example problems are presented to illustrate these difficulties and suggestions are proposed to resolve these problems. Keywords: slope stability, limit equilibrium, method of slices, factor of safety, side force function.

scholarly journals Factor of Safety Reduction Factors for Accounting for Progressive Failure for Earthen Levees with Underlying Thin Layers of Sensitive Soils

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
Adam J. Lobbestael ◽  
Adda Athanasopoulos-Zekkos ◽  
Josh Colley
Keyword(s):  
Finite Element ◽  
Strain Softening ◽  
Progressive Failure ◽  
Limit Equilibrium ◽  
Thin Layers ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Limit Equilibrium Methods ◽  
The Stability ◽  
Reduction Factors

The effects of progressive failure on flood embankments with underlying thin layers of soft, sensitive soils are investigated. Finite element analysis allows for investigation of strain-softening effects and progressive failure in soft and sensitive soils. However, limit equilibrium methods for slope stability analysis, widely used in industry, cannot capture these effects and may result in unconservative factors of safety. A parametric analysis was conducted to investigate the effect of thin layers of soft sensitive soils on the stability of flood embankments. A flood embankment was modeled using both the limit equilibrium method and the finite element method. The foundation profile was altered to determine the extent to which varying soft and sensitive soils affected the stability of the embankment, with respect to progressive failure. The results from the two methods were compared to determine reduction factors that can be applied towards factors of safety computed using limit equilibrium methods, in order to capture progressive failure.

Seismic Coefficients for Simplified Deepwater Slope Stability Assessment Under Earthquake Loading

2021 ◽  
Author(s):  
Aurelian C. Trandafir
Keyword(s):  
Finite Element ◽  
Slope Stability ◽  
Shear Strain ◽  
Limit Equilibrium ◽  
Slope Instability ◽  
Earthquake Loading ◽  
Complex Deformation ◽  
Correlation Relationship ◽  
Stability Analyses ◽  
Seismic Coefficient

Abstract Pseudostatic limit-equilibrium based slope stability analyses are carried out on a routine basis to evaluate stability of submarine slopes under earthquake loading. For slopes in deepwater settings, a major challenge in performing pseudostatic slope stability analyses is selection of an appropriate seismic coefficient. Most published displacement-based methodologies for seismic coefficient selection were developed using simplified sliding block models for seismic slope performance evaluation that are unable to capture the complex deformation mechanism of deepwater slopes during earthquakes. To address this challenge, this study employs two-dimensional dynamic finite-element based deformation analysis to investigate the earthquake response of submarine clay slopes characterized by morphology, stratigraphic architecture and geotechnical properties representative for the deepwater environment. Finite-element computed seismic slope performance indicators, including horizontal peak ground acceleration at the seafloor and earthquake-induced maximum shear strain within the slope, along with horizontal seismic coefficients required to trigger slope instability in limit-equilibrium based pseudostatic stability analyses are used to develop a rational shear strain-based correlation relationship for deepwater slope seismic coefficient selection.

Sign in / Sign up

Export Citation Format

Share Document