Preparation and Properties of 5-Fluorouracil-Loaded Chitosan Microspheres for the Intranasal Administration

Drug Research ◽  
2018 ◽  
Vol 68 (12) ◽  
pp. 673-679 ◽  
Author(s):  
Wanqing Li ◽  
Hongyuan Ba ◽  
Peng Huang ◽  
Aiping Zheng ◽  
Xi Yang
Keyword(s):  
Intranasal Administration ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Average Diameter ◽  
Orthogonal Experimental Design ◽  
Preparation Technique ◽  
Drug Release Profile ◽  
Chitosan Microspheres ◽  
Release Characteristic

Abstract Objective To study the preparation technique of 5-fluorouracil and the release characteristic of 5-fluorouracil-loaded chitosan microspheres for the intranasal administration. Methods 5-fluorouracil-loaded chitosan microspheres were prepared by emulsion chemical cross-link technique. The orthogonal experimental design was used to optimize the preparation procedure. Dynamic dialysis method was applied to determine the release characteristic of microspheres in vitro and its influencing factors. Swelling behavior was expressed by swelling ratio. The degree of mucoadhesion was investigated by determining the mucociliary transport rate(MTR) of the microparticle across a frog palate. Results Microspheres with a good shape and narrow size distribution were prepared. The average diameter was 43±4 μm. The drug loading was (38.5±1.0) %. The entrapment efficiency was (79.0±1.8) %. The drug release profile in vitro could be described by Higuichi eqution as Q=0.1035t1/2+0.0284 (r=0.9965). Chitosan had good mucoadhesive property and caused a significant reduction in MTR(P<0.01). Conclusion The optimized technique has a good reproducibility and a high entrapment efficiency, so it could be used to prepare 5-fluorouracil-loaded chitosan microspheres for the intranasal administration.Chitosan is a good material for nasal preparation and has prospective development in the pharmaceutical field.

Preparation and Characterization of Cyclophosphamide-Loaded Chitosan Microspheres

2012 ◽  
Vol 621 ◽  
pp. 130-133
Author(s):  
Yi Lin Ding ◽  
Su Su Ding ◽  
Guo Fang Ding
Keyword(s):  
Drug Release ◽  
Anticancer Agent ◽  
Loading Rate ◽  
Drug Loading ◽  
Average Diameter ◽  
Uv Spectrophotometry ◽  
Chitosan Microspheres ◽  
Dialysis Bag

Chitosan microspheres were prepared by using a cross linking agent combined with an emulsion technique. Cyclophosphamide was loaded as an anticancer agent. Obtained microspheres were spherical and regular, with a smooth surface morphology, having an average diameter of 15.7±9.0μm. After preparation, the drug-loading rate and entrapment rate of cyclophosphamide was investigated by UV spectrophotometry. Drug release was tested in vitro in a dynamic dialysis system with a dialysis bag. The chitosan microspheres prepared were proved to have good drug release profiles.

scholarly journals PREPARATION OF CONTROLLED RELEASE METFORMIN HYDROCHLORIDE LOADED CHITOSAN MICROSPHERES AND EVALAUTION OF FORMULATION PARAMETERS

2018 ◽  
Vol 8 (5-s) ◽  
pp. 378-387
Author(s):  
Mrs Kalpna ◽  
Druv Dev ◽  
Mohammad Shahnaz ◽  
Jyoti Parkash ◽  
DN Prasad
Keyword(s):  
Controlled Release ◽  
Sodium Tripolyphosphate ◽  
Drug Loading ◽  
Crosslinking Agent ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Release Formulation ◽  
Chitosan Microspheres ◽  
Ionotropic Gelation

In this work an attempt was made for the preparation and evaluation of controlled release chitosan microspheres using anti-diabetes drug Metformin hydrochloride. The microspheres were prepared by Ionotropic gelation method using chitosan as polymer and Sodium Tripolyphosphate (TPP) as crosslinking agent. The compatibility of drug and polymer is analyzed by using FTIR and DSC method. There was no interaction detected by FTIR and DSC study. Further the prepared microspheres were evaluated for particle size, drug entrapment efficiency, surface morphology, drug content, drug loading and in vitro drug release. Amongst all the formulation batch 7 shows the best release when compared to other batch. SEM (Scanning electron microscopy) revealed that microspheres were spherical and porous. Finally it was concluded that Metformin hydrochloride loaded chitosan – TPP microspheres have been found suitable for controlled release formulation due to its bioavailability and biodegradability and thus lead to improved patient compliance. Keywords: Microspheres, Metformin hydrochloride, Ionotropic gelation method, chitosan.

Formulation Development and Characterization of Solid Lipid Nanoparticles Containing Nimesulide

2009 ◽  
Vol 1 (1) ◽  
Author(s):  
Jain Pushpendra ◽  
Mishra Amit ◽  
Yadav K. ◽  
Patil K. ◽  
Baghel S.
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Average Diameter ◽  
Controlled Drug Release ◽  
Lipid Nanoparticles ◽  
Formulation Development ◽  
Solid Lipid

The aim of this study was to prepare nimesulide solid lipid nanoparticles (NIM-SLNs), to formulate the controlled drug release and to evaluate its physiochemical characteristics. NIM-SLNs were prepared by an emulsification and low-temperature solidification method. Additionally, attempts have been made to study the effect of individual process parameters (stirring speed and stirring time) and formulation parameters (Lecithin concentration, drug concentration and surfactant concentration) on entrapment efficiency. An approximately entrapment efficiency of (60%) and an average drug loading of (1.0 %) were achieved from optimized formulation of NIM-SLNs. The results show that the TMZ-SLNs had an average diameter of 187±1.23nm and in vitro drug release was conducted in phosphate-buffered saline (pH 7.4) at 37oC. The cumulative percentages drug release of nimesulide was found approximately 60% in 24 hours and release behavior was in accordance with Higuchi-equation. The results indicate that the SLNs is a promising controlled-release system. It may also allow a reduction in dosage and a decrease in systemic toxicity.

PEG-PLGA Nanoparticle Modified by Transferrin Loading Doxorubicin: In Vitro and In Vivo Studies for Glioma

2013 ◽  
Vol 750-752 ◽  
pp. 1643-1650 ◽  
Author(s):  
Guo Dong Liu ◽  
Jin Ning Mao ◽  
Tao Sun ◽  
Zhen Jiang ◽  
Jun Dong ◽  
...  
Keyword(s):  
Mtt Assay ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Average Diameter ◽  
C6 Glioma ◽  
C6 Glioma Cells ◽  
Hplc Assay ◽  
Plga Nanoparticle

Purpose A biodegradable PEG-PLGA nanoparticle (NP) modified by transferrin (Tf) was conceived. Doxorubicin (Dox), a widely used antitumor agent, without passing through the BBB, which limited its utility on glioma, was encapsulated inside (Tf-NP-Dox). Furthermore, its therapeutic efficacy to glioma was evaluated both in vitro and in vivo. Methods Tf-NP-Dox was prepared via modified single emulsion method. Its characterization including size, Drug loading capacity (DLC), entrapment efficiency (EE), Tf number on Tf-NP-Dox surface were estimated. The antitumor efficiency in vitro was evaluated via MTT assay. The transmembrane transportation was evaluated via HPLC assay. The antitumor efficiency in vivo was assessed on C6 glioma intracranial implant rats model. Results The average diameter of Tf-NP-Dox is around 200 nm with surface Tf molecule number per Tf-NP-Dox approximately 25. MTT assay demonstrated stronger cytotoxicity of Tf-NP-Dox to C6 glioma cells (P<0.01). HPLC assay showed Tf-NP-Dox transport Dox into C6 with higher efficiency compare to NP-Dox or Dox (P<0.01). On C6 glioma bearing rat, Tf-NP-Dox could transport more Dox into tumors tested by HPLC assay (P<0.05), and extended life span markedly compared to NP-Dox or Dox (P<0.05). Conclusions Tf-NP-Dox had a potential of glioma targeting and had a better therapeutic effect to glioma both in vitro and in vivo.

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Stereocomplexation Assisted Assembly of Poly(γ-glutamic Acid)-graft-polylactide Nano-micelles and Their Efficacy as Anticancer Drug Carrier

2018 ◽  
Vol 18 (2) ◽  
pp. 302-311
Author(s):  
Shulin Dai ◽  
Yucheng Feng ◽  
Shuyi Li ◽  
Yuxiao Chen ◽  
Meiqing Liu ◽  
...  
Keyword(s):  
Glutamic Acid ◽  
Drug Carrier ◽  
Drug Loading ◽  
Drug Carriers ◽  
Cancer Drug ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Anti Cancer ◽  
Physical Interactions

Background: Micelles as drug carriers are characterized by their inherent instability due to the weak physical interactions that facilitate the self-assembly of amphiphilic block copolymers. As one of the strong physical interactions, the stereocomplexation between the equal molar of enantiomeric polylactides, i.e., the poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA), may be harnessed to obtain micelles with enhanced stability and drug loading capacity and consequent sustained release. </P><P> Aims/Methods: In this paper, stereocomplexed micelles gama-PGA-g-PLA micelles) were fabricated from the stereocomplexation between poly(gama-glutamic acid)-graft-PLLA gama-PGA-g-PLA) and poly(gamaglutamic acid)-graft-PDLA gama-PGA-g-PLA). These stereocomplexed micelles exhibited a lower CMC than the corresponding enantiomeric micelles. Result: Furthermore, they showed higher drug loading content and drug loading efficiency in addition to more sustained drug release profile in vitro. In vivo imaging confirmed that the DiR-encapsulated stereocomplexed gama-PGA-g-PLA micelles can deliver anti-cancer drug to tumors with enhanced tissue penetration. Overall, gama-PGA-g-PLA micelles exhibited greater anti-cancer effects as compared with the free drug and the stereocomplexation may be a promising strategy for fabrication of anti-cancer drug carriers with significantly enhanced efficacy.

scholarly journals Long-Acting Risperidone Dual Control System: Preparation, Characterization and Evaluation In Vitro and In Vivo

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1210
Author(s):  
Xieguo Yan ◽  
Shiqiang Wang ◽  
Kaoxiang Sun
Keyword(s):  
Drug Loading ◽  
Entrapment Efficiency ◽  
In Vitro Dissolution ◽  
Dissolution Behavior ◽  
In Vivo Evaluation ◽  
Long Term Treatment ◽  
Long Acting

Schizophrenia, a psychiatric disorder, requires long-term treatment; however, large fluctuations in blood drug concentration increase the risk of adverse reactions. We prepared a long-term risperidone (RIS) implantation system that can stabilize RIS release and established in-vitro and in-vivo evaluation systems. Cumulative release, drug loading, and entrapment efficiency were used as evaluation indicators to evaluate the effects of different pore formers, polymer ratios, porogen concentrations, and oil–water ratios on a RIS implant (RIS-IM). We also built a mathematical model to identify the optimized formulation by stepwise regression. We also assessed the crystalline changes, residual solvents, solubility and stability after sterilization, in-vivo polymer degradation, pharmacokinetics, and tissue inflammation in the case of the optimized formulation. The surface of the optimized RIS microspheres was small and hollow with 134.4 ± 3.5 µm particle size, 1.60 SPAN, 46.7% ± 2.3% implant drug loading, and 93.4% entrapment efficiency. The in-vitro dissolution behavior of RIS-IM had zero-order kinetics and stable blood concentration; no lag time was released for over three months. Furthermore, the RIS-IM was not only non-irritating to tissues but also had good biocompatibility and product stability. Long-acting RIS-IMs with microspheres and film coatings can provide a new avenue for treating schizophrenia.

scholarly journals Development of In Situ Self-Assembly Nanoparticles to Encapsulate Lopinavir and Ritonavir for Long-Acting Subcutaneous Injection

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 904
Author(s):  
Irin Tanaudommongkon ◽  
Asama Tanaudommongkon ◽  
Xiaowei Dong
Keyword(s):  
Sustained Release ◽  
Trough Concentration ◽  
Self Assembly ◽  
Subcutaneous Injection ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Long Acting

Most antiretroviral medications for human immunodeficiency virus treatment and prevention require high levels of patient adherence, such that medications need to be administered daily without missing doses. Here, a long-acting subcutaneous injection of lopinavir (LPV) in combination with ritonavir (RTV) using in situ self-assembly nanoparticles (ISNPs) was developed to potentially overcome adherence barriers. The ISNP approach can improve the pharmacokinetic profiles of the drugs. The ISNPs were characterized in terms of particle size, drug entrapment efficiency, drug loading, in vitro release study, and in vivo pharmacokinetic study. LPV/RTV ISNPs were 167.8 nm in size, with a polydispersity index of less than 0.35. The entrapment efficiency was over 98% for both LPV and RTV, with drug loadings of 25% LPV and 6.3% RTV. A slow release rate of LPV was observed at about 20% on day 5, followed by a sustained release beyond 14 days. RTV released faster than LPV in the first 5 days and slower than LPV thereafter. LPV trough concentration remained above 160 ng/mL and RTV trough concentration was above 50 ng/mL after 6 days with one subcutaneous injection. Overall, the ISNP-based LPV/RTV injection showed sustained release profiles in both in vitro and in vivo studies.

Photodynamic Treatment of Colorectal Cancer Using Chlorin e6-Loaded Poly(lactide-co-glycolide)- Based Nanoparticles

2021 ◽  
Vol 17 (10) ◽  
pp. 1939-1950
Author(s):  
Beibei Lin ◽  
Xuegu Xu ◽  
Xiaobi Zhang ◽  
Yinfei Yu ◽  
Xiaoling Wang
Keyword(s):  
Colorectal Cancer ◽  
Drug Loading ◽  
Average Diameter ◽  
Plga Nanoparticles ◽  
Chlorin E6 ◽  
Photodynamic Treatment ◽  
Hct 116 ◽  
Hct 116 Cells ◽  
The Stability

We prepared poly(lactide-co-glycolide) (PLGA) encapsulated with chlorin e6 (Ce6) in an effort to increase the stability and efficiency of photosensitizers for photodynamic therapy (PDT). We determined that Ce6-loaded PLGA nanoparticles (PLGA-Ce6 NPs) had drug-loading efficiency of 5%. The efficiency of encapsulation was 82%, the zeta potential was- 25 mV, and the average diameter was 130 nm. The encapsulation of Ce6 in PLGA nanoparticles showed excellent stability. The nanoparticles exhibited sustained Ce6 release profiles with 50% released at the end of 3 days, whereas free Ce6 showed rapid release within 1 day. Ce6 release patterns were controlled by encapsulation into PLGA. The uptake of PLGA-Ce6 NPs was significantly enhanced by endocytosis in the first 8 hours in the HCT-116 cell line. An intracellular reactive oxygen species assay revealed the enhanced uptake of the nanoparticles. An in vitro anti-tumor activity assay showed that the PLGA-Ce6 NPs exhibited enhanced phototoxicity toward HCT-116 cells and a slightly lower IC50 value in HCT-116 cells than Ce6 solution alone. Exposure of HCT-116 cell spheroids to PLGA-Ce6 NPs penetrated more profoundly and had better phototoxicity than pure drugs. These findings suggest that PLGA-Ce6 NPs might serve as PDT for colorectal cancer.

Enhanced oral bioavailability of nisoldipine-piperine-loaded poly-lactic-co-glycolic acid nanoparticles

2017 ◽  
Vol 6 (6) ◽  
pp. 517-526 ◽  
Author(s):  
Permender Rathee ◽  
Anjoo Kamboj ◽  
Shabir Sidhu
Keyword(s):  
Oral Bioavailability ◽  
Drug Loading ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Pharmacokinetic Interaction ◽  
Precipitation Method ◽  
Pharmacokinetic Studies ◽  
Average Particle

AbstractBackground:Piperine helps in the improvement of bioavailability through pharmacokinetic interaction by modulating metabolism when administered with other drugs. Nisoldipine is a substrate for cytochrome P4503A4 enzymes. The study was undertaken to assess the influence of piperine on the pharmacokinetics and pharmacodynamics of nisoldipine nanoparticles in rats.Methods:Optimization studies of nanoparticles were performed using Taguchi L9 orthogonal array, and the nanoparticles were formulated by the precipitation method. The influence of piperine and nanoparticles was evaluated by means of in vivo kinetic and dynamic studies by oral administration in rats.Results:The entrapment efficiency, drug loading, ζ potential, and average particle size of optimized nisoldipine-piperine nanoparticles was 89.77±1.06%, 13.6±0.56%, −26.5 mV, and 132±7.21 nm, respectively. The in vitro release in 0.1 n HCl and 6.8 pH phosphate buffer was 96.9±0.48% and 98.3±0.26%, respectively. Pharmacokinetic studies showed a 4.9-fold increase in oral bioavailability and a >28.376±1.32% reduction in systemic blood pressure by using nanoparticles as compared to control (nisoldipine suspension) in Wistar rats.Conclusion:The results revealed that piperine being an inhibitor of cytochrome P4503A4 enzymes enhanced the bioavailability of nisoldipine by 4.9-fold in nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document