Does GastroPlus Support Similarity and Dissimilarity Factors of in vitro-in vivo Prediction in Biowaiver Studies? A Lower Strength Amlodipine As a Model Drug

Drug Research ◽  
2018 ◽  
Vol 68 (11) ◽  
pp. 625-630 ◽  
Author(s):  
Abdel Zaid ◽  
Naser Shraim ◽  
Asmaa Radwan ◽  
Nidal Jaradat ◽  
Samah Hirzallah ◽  
...  
Keyword(s):  
Health Care Professionals ◽  
In Silico ◽  
In Vitro Release ◽  
Pharmaceutical Products ◽  
Generic Product ◽  
Dissolution Profile ◽  
Market Place ◽  
Lower Strength

Abstract Background Many generic pharmaceutical products are currently available on the market place worldwide. Recently, there is a growing concern on the quality and efficacy of generic products. However, health care professionals such as physicians and pharmacists are in difficult situations to choose among alternatives. Purpose The aim of this study is to assess the effectiveness of the in silico technique (Gastro Plus®) in the biowaiver study and whether similarity and dissimilarity factors (f 2 and f 1 respectively) are effective in this regard. Method The concentration of amlodipine in the sample was calculated by comparing the absorbance of the sample with that of a previously prepared amlodipine standard solution using validated HPLC method. The dissolution profile for each product (brand and generics) was constructed. The similarity (f2) and dissimilarity (f 1) factors were calculated for the generic product according to equation 1 and 2. GastroPlus™ software (version 9.0, Simulations Plus Inc., Lancaster, CA, USA) was used to predict the absorption profiles of amlodipine from the generic product Amlovasc® and the reference Norvasc®. Conclusion These results may provide a rationale for the interchangeability between the RLD and generic version based on in vitro release profiles in silico technique especially in a lower strength dose drug.

scholarly journals Non-compendial vs compendial analytical tests - a powerful tool for predicting in vitro similarity of highly viscous oral suspension

2019 ◽  
Vol 64 (02) ◽  
pp. 61-72
Author(s):  
Elena Kazandjievska ◽  
Iva Antova ◽  
Slavica Mitrevska ◽  
Aleksandar Dimkovski ◽  
Elena Dimov ◽  
...  
Keyword(s):  
Drug Release ◽  
Negative Impact ◽  
In Vitro Release ◽  
Active Pharmaceutical Ingredient ◽  
Pharmaceutical Products ◽  
Dosage Forms ◽  
Oral Suspension ◽  
In Vitro Dissolution ◽  
Dissolution Profile

In vitro dissolution profiles are increasingly used to evaluate drug release characteristics of pharmaceutical products. The dissolution methods is expected to be an appropriate tool for checking consistency of the pharmaceutical attributes by discriminating similarities and dissimilarities between different drug formulations. Expansion in development of novel “special” dosage forms, due to the manner in which these dosage forms release the active pharmaceutical ingredient, usually requires applying non-compendial dissolution strategy that differs from the traditional compendial recommendations. For demonstrating sameness in the dissolution profile, in vitro drug release comparison between test and reference product of highly viscous oral suspension by applying non-compendial peak vessel against conventional hemispheric vessel was demonstrated in this study. All reference batches exhibited high variability in dissolution data when using hemispheric vessel due to forming mound compact mass at the bottom of the vessel. Different strategies for samples manipulation, before and during dissolution period, were performed in order to eliminate additional variabilities. Modifications of conventional USP 2 apparatus such as using peak vessel provided with more reproducible and reliable result for distinguishing in vitro similarities between different formulations of oral suspensions. Misinterpretation of dissolution data can lead to negative impact on product development. Taking time to observe and evaluate what is happening to the product in the vessel during dissolution is of curtail consideration for proper selection of the dissolution strategy. Keywords: oral suspensions; in-vitro release; hydrodynamic variability; USP apparatus 2/ Paddle apparatus; peak vessel

Comparative study of different meloxicam generic products with the brand product

2019 ◽  
pp. 116-124
Keyword(s):  
Immediate Release ◽  
Generic Product ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Innovator Product ◽  
Similarity Factor ◽  
Generic Products ◽  
Brand Product

This study aims to evaluate different products of meloxicam Table; Five meloxicam immediate-release generic products (15 mg Tables) were compared with the innovator, reference product, (Mobic®, Boehringer) to find the interchangeable product with the innovator product. Different physical tests were conducted including weight uniformity, thickness, diameter, hardness, friability and disintegration test. In addition, prediction of in-vivo behavior was assessed by measuring the dissolution profile of meloxicam for all the products. Similarity factor (f2) was calculated to compare between the dissolution profile of the generic products with the dissolution profile of innovator product. The results revealed that all the studied products are complied with the British Pharmacopoeia requirements. However, not all of them showed similar in-vitro profile to the brand product. Four out of five generic products, included in this study, showed similarity in dissolution profile to the brand one, which indicates possible bio-equivalency, with the advantages of money saving of using such generic products. One generic product showed similarity factor less than 50, which might give an indication that this generic product is not capable to be bioequivalent with the brand (innovator) product. Overall, this study can be considered an important applicable study that gives an indication about the in-vivo performance of different products. In addition, the study demonstrates the applicability of a simple in-vitro dissolution study as a surrogate way of assessing product bioavailability instead of an expensive and complicated in-vivo bioequivalent study.

scholarly journals COMPARISON OF THE USP APPARATUS 2 AND 4 FOR TESTING THE IN VITRO RELEASE PERFORMANCE OF IBUPROFEN GENERIC SUSPENSIONS

2017 ◽  
Vol 9 (4) ◽  
pp. 90 ◽  
Author(s):  
Jose Raul Medina ◽  
Mariel Cortes ◽  
Erik Romo
Keyword(s):  
In Vitro Release ◽  
Generic Product ◽  
Dissolution Profile ◽  
Drug Products ◽  
Flow Through ◽  
Usp Apparatus 4 ◽  
Usp Apparatus ◽  
Usp Apparatus 2 ◽  
Vitro Release

Objective: The aim of this study was the comparison of the in vitro release performance of ibuprofen generic suspensions and reference, based on the hydrodynamic environment generated by the flow-through cell method (USP Apparatus 4). Results were compared with those obtained by the use of the USP Apparatus 2.Methods: The Advil® suspension (2 g/100 ml) and two generic formulations with the same dose were tested. Dissolution studies were carried out using a USP Apparatus 4 Sotax CE6 with 22.6 mm cells, laminar flow at 16 ml/min, and pH 7.2 phosphate buffer at 37.0±0.5 °C as dissolution medium. Ibuprofen was quantified spectrophotometrically at 222 nm. The in vitro release of the three drug products were studied using the USP Apparatus 2. The dissolution profiles of generic products were compared with the reference by model-independent, model-dependent, and analysis of variance (ANOVA)-based comparisons.Results: The dissolution profile of the generic product A was similar to the dissolution profile of reference, only with the use of the USP Apparatus 4. The f2 similarity factor was>50 and no significant differences were found with dissolution efficiency data (*P>0.05). Similar results were found with the comparison of t50% and t63.2% values. Similar dissolution profiles between generic product A and reference were also found with ANOVA-based comparisons.Conclusion: The flow-through cell method was adequate for study the in vitro release of ibuprofen suspensions. It is necessary to evaluate the in vivoperformance of the drug products used in order to estimate the predictability of the proposed methodology. 

Reliability of a Single β-Thromboglobulin Measurement in a Diabetic Population : Importance of PGE1 in Anticoagulant Mixture

1987 ◽  
Vol 57 (02) ◽  
pp. 201-204 ◽  
Author(s):  
P Y Scarabin ◽  
L Strain ◽  
C A Ludlam ◽  
J Jones ◽  
E M Kohner
Keyword(s):  
In Vitro Release ◽  
Mean Value ◽  
Reliable Estimate ◽  
Diabetic Patients ◽  
Single Measurement ◽  
Diabetic Population ◽  
The Difference ◽  
Vitro Release

SummaryDuring the collection of samples for plasma β-thromboglobulin (β-TG) determination, it is well established that artificially high values can be observed due to in-vitro release. To estimate the reliability of a single β-TG measurement, blood samples were collected simultaneously from both arms on two separate occasions in 56 diabetic patients selected for a clinical trial. From each arm, blood was taken into two tubes containing an anticoagulant mixture with (tube A) and without (tube B) PGE!. The overall mean value of B-TG in tube B was 1.14 times higher than in tube A (p <0.01). The markedly large between-arms variation accounted for the most part of within-subject variation in both tubes and was significantly greater in tube B than in tube A. Based on the difference between B-TG values from both arms, the number of subjects with artifically high B-TG values was significantly higher in tube B than in tube A on each occasion (overall rate: 28% and 14% respectively). Estimate of between-occasions variation showed that B-TG levels were relatively stable for each subject between two occasions in each tube. It is concluded that the use of PGEi decreases falsely high B-TG levels, but a single measurement of B-TG does not provide a reliable estimate of the true B-TG value in vivo.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Development, in vitro and in vivo Evaluations of Solid-Lipid Microparticles based on Solidified Micellar Carrier System for Oral Delivery of Cefepime

2017 ◽  
Vol 10 (1) ◽  
pp. 3582-3593
Author(s):  
Chukwuebuka Umeyor ◽  
Uchechukwu Nnadozie ◽  
Anthony Attama
Keyword(s):  
Oral Delivery ◽  
In Vitro Release ◽  
Carrier System ◽  
Solid Lipid ◽  
Solid Lipid Microparticles ◽  
Release Study ◽  
Lipid Microparticles ◽  
Vitro Release

This study seeks to formulate and evaluate a solid lipid nanoparticle-based, solidified micellar carrier system for oral delivery of cefepime. Cefepime has enjoyed a lot of therapeutic usage in the treatment of susceptible bacterial infections; however, its use is limited due to its administration as an injection only with poor patient compliance. Since oral drug administration encourage high patient compliance with resultant effect in improved therapy, cefepime was formulated as solid lipid microparticles for oral delivery using the concept of solidified micellar carrier system. The carrier system was evaluated based on particle yield, particle size and morphology, encapsulation efficiency (EE %), and thermal analysis using differential scanning calorimeter (DSC). Preliminary microbiological studies were done using gram positive and negative bacteria. In vitro release study was performed using biorelevant media, while in vivo release study was performed in white albino rats. The yield of solid lipid microparticles (SLM) ranged from 84.2 – 98.0 %. The SLM were spherical with size ranges of 3.8 ± 1.2 to 42.0 ± 1.4 µm. The EE % calculated ranged from 83.6 – 94.8 %. Thermal analysis showed that SLM was less crystalline with high potential for drug entrapment. Microbial studies showed that cefepime retained its broad spectrum anti-bacterial activity. In vitro release showed sustained release of cefepime from SLM, and in vivo release study showed high concentration of cefepime released in the plasma of study rats. The study showed that smart engineering of solidified micellar carrier system could be used to improve oral delivery of cefepime.

Formulation and Evaluation of Itopride Hydrochloride Floating Beads for Gastroretentive Delivery

2013 ◽  
Vol 6 (4) ◽  
pp. 2269-2280
Author(s):  
Nagratna Dhople ◽  
P N Dandag ◽  
A P Gadad ◽  
C K Pandey ◽  
Masthiholimath V S
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sustained Release Formulation ◽  
Prokinetic Drug ◽  
Drug Entrapment Efficiency ◽  
Itopride Hydrochloride ◽  
Vitro Release

A gastroretentive sustained release system of itopride hydrochloride was formulated to increase the gastric residence time and modulate its release behavior. Itopride hydrochloride is a prokinetic drug used in the treatment of gastroeosophageal reflux disease, Non-ulcer dyspepsia and as an antiemetic. Hence, itopride hydrochloride beads were prepared by emulsion gelation method by employing low methoxy pectin and sodium alginate as sustained release polymers in three different ratios alone and in combination and sunflower oil was used to enable floating property to the beads. The effect of variation in polymer and their concentration was investigated. The beads were evaluated for production yield, particle size, swelling index, density measurement, buoyancy, drug content, drug entrapment efficiency, in vitro release characteristics and release kinetic study. Based on drug entrapment efficiency, buoyancy, swelling and in vitro release, F9 was selected as the optimized formulation. F9 was further subjected to surface morphology by SEM, in vitro release comparison with marketed formulation, in vivo floating study in rabbits and stability study for 90 days. In vitro release follows zero order and fitted in Korsmeyer peppas model (Non-Fickian release). Therefore, the rate of drug release is due to the combined effect of drug diffusion and polymer swelling. The in vivo X-ray studies revealed that the beads were floating in the rabbit stomach up to 10 hours. Thus, it was concluded that the sustained release formulation containing itopride hydrochloride was found to improve patient compliance, minimize the side effects and decrease the frequency of administration.

Formulation and Evaluation of Immediate Release Bilayer Tablets of Telmisartan and Hydrochlorothiazide

2011 ◽  
Vol 4 (3) ◽  
pp. 1477-1483
Author(s):  
Natarajan R ◽  
N Patel ◽  
Rajendran N N ◽  
M Rangapriya
Keyword(s):  
Antihypertensive Drugs ◽  
In Vitro Release ◽  
Immediate Release ◽  
Wet Granulation ◽  
Physical Parameters ◽  
Dissolution Profile ◽  
Formulation Development ◽  
Sodium Starch Glycolate ◽  
Bilayer Tablets

The main goal of this study was to develop a stable formulation of antihypertensive drugs telmisartan and hydrochlorothiazide as an immediate-release bilayer tablet and to evaluate the dissolution profile in comparison with a reference product. The formulation development work was initiated with wet granulation. Telmisartan was converted to its sodium salt by dissolving in aqueous solution of sodium hydroxide to improve solubility and drug release. Lactose monohydrate and microcrystalline cellulose were used as diluents. Starch paste is prepared in purified water and was used as the binder. Sodium starch glycolate is added as a disintegrating agent. Magnesium stearate was used as the lubricant. The prepared granules were compressed into a double-layer compression machine. The tablets thus formulated with higher proportion of sodium starch glycolate showed satisfactory physical parameters, and it was found to be stable and in vitro release studies are showed that formulation (F-T5H5) was 101.11% and 99.89% respectively. The formulation T5H5 is further selected and compared with the release profile of the innovator product, and was found to be similar (f2 factor) to that of the marketed product. The results suggest the feasibility of developing bilayer tablets consisting of telmisartan and hydrochlorothiazide for the convenience of patients with hypertension.  

Recent In Vitro and In Silico Advances in the Understanding of Intranasal Drug Delivery

2020 ◽  
Vol 26 ◽  
Author(s):  
John Chen ◽  
Andrew Martin ◽  
Warren H. Finlay
Keyword(s):  
Drug Delivery ◽  
In Silico ◽  
Local Drug Delivery ◽  
In Vivo Studies ◽  
Intranasal Drug Delivery ◽  
Nasal Sprays ◽  
In Silico Studies ◽  
Drug Delivery Devices

Background: Many drugs are delivered intranasally for local or systemic effect, typically in the form of droplets or aerosols. Because of the high cost of in vivo studies, drug developers and researchers often turn to in vitro or in silico testing when first evaluating the behavior and properties of intranasal drug delivery devices and formulations. Recent advances in manufacturing and computer technologies have allowed for increasingly realistic and sophisticated in vitro and in silico reconstructions of the human nasal airways. Objective: To perform a summary of advances in understanding of intranasal drug delivery based on recent in vitro and in silico studies. Conclusion: The turbinates are a common target for local drug delivery applications, and while nasal sprays are able to reach this region, there is currently no broad consensus across the in vitro and in silico literature concerning optimal parameters for device design, formulation properties and patient technique which would maximize turbinate deposition. Nebulizers are able to more easily target the turbinates, but come with the disadvantage of significant lung deposition. Targeting of the olfactory region of the nasal cavity has been explored for potential treatment of central nervous system conditions. Conventional intranasal devices, such as nasal sprays and nebulizers, deliver very little dose to the olfactory region. Recent progress in our understanding of intranasal delivery will be useful in the development of the next generation of intranasal drug delivery devices.

In-silico Studies of Isolated Phytoalkaloid Against Lipoxygenase: Study Based on Possible Correlation

2018 ◽  
Vol 21 (3) ◽  
pp. 215-221
Author(s):  
Haroon Khan ◽  
Muhammad Zafar ◽  
Helena Den-Haan ◽  
Horacio Perez-Sanchez ◽  
Mohammad Amjad Kamal
Keyword(s):  
In Silico ◽  
Docking Studies ◽  
In Vivo Studies ◽  
In Vitro Assays ◽  
Chronic Obstructive ◽  
Lipoxygenase Inhibitors ◽  
Lipoxygenase Inhibition ◽  
In Silico Studies

Aim and Objective: Lipoxygenase (LOX) enzymes play an important role in the pathophysiology of several inflammatory and allergic diseases including bronchial asthma, allergic rhinitis, atopic dermatitis, allergic conjunctivitis, rheumatoid arthritis and chronic obstructive pulmonary disease. Inhibitors of the LOX are believed to be an ideal approach in the treatment of diseases caused by its over-expression. In this regard, several synthetic and natural agents are under investigation worldwide. Alkaloids are the most thoroughly investigated class of natural compounds with outstanding past in clinically useful drugs. In this article, we have discussed various alkaloids of plant origin that have already shown lipoxygenase inhibition in-vitro with possible correlation in in silico studies. Materials and Methods: Molecular docking studies were performed using MOE (Molecular Operating Environment) software. Among the ten reported LOX alkaloids inhibitors, derived from plant, compounds 4, 2, 3 and 1 showed excellent docking scores and receptor sensitivity. Result and Conclusion: These compounds already exhibited in vitro lipoxygenase inhibition and the MOE results strongly correlated with the experimental results. On the basis of these in vitro assays and computer aided results, we suggest that these compounds need further detail in vivo studies and clinical trial for the discovery of new more effective and safe lipoxygenase inhibitors. In conclusion, these results might be useful in the design of new and potential lipoxygenase (LOX) inhibitors.

Sign in / Sign up

Export Citation Format

Share Document