Analysis of Landslide Reactivation Mechanisms in Daunia Clay Slopes by Means of Limit Equilibrium and FEM Methods

2010 ◽  
Author(s):  
P. Lollino ◽  
G. Elia ◽  
F. Cotecchia ◽  
G. Mitaritonna
Keyword(s):  
Limit Equilibrium ◽  
Landslide Reactivation ◽  
Clay Slopes

ANALISIS PENANGGULANGAN KELONGSORAN TANAH PADA RUAS JALAN GUNUNG TUGEL PATIKRAJA BANYUMAS

2017 ◽  
Vol 14 (1) ◽  
pp. 53
Author(s):  
Arwan Apriyono ◽  
Sumiyanto Sumiyanto ◽  
Nanang Gunawan Wariyatno
Keyword(s):  
Limit Equilibrium ◽  
Retaining Wall ◽  
Limit Equilibrium Method ◽  
Pile Foundations ◽  
Soil Parameters ◽  
The Road ◽  
Realistic Option ◽  
Stable Conditions ◽  
Using Data ◽  
Wall Slope

Gunung Tugel is an area that located Patikraja Region, Southern Banyumas. Thetopography of the area is mostly mountainous with a slope that varies from flat to steep. Thiscondition makes to many areas of this region potentially landslide. In 2015, a landslideoccurred in Jalan Gunung Tugel. The Landslide occurred along 70 meters on the half of theroad and causing traffic Patikraja-Purwokerto disturbed. To repair the damage of the road andavoid further landslides, necessary to analyze slope stability. This study is to analyze landslidereinforcement that occurred at Gunung Tugel and divides into 3 step. The first step is fieldinvestigation to determine the condition of the location and dimensions of landslides. Thesecond step is to know the soil parameters and analyzes data were obtained from the field. Andthe final step is analyzed of the landslide reinforcement by using data obtained from thepreceding step. In this research, will be applied three variations of reinforcement i.e. retainingwall, pile foundation and combine both of pile foundations and retaining wall. Slope stabilityanalysis was conducted using limit equilibrium method. Based on the analysis conducted onthe three variations reinforcement, combine both of pile foundations and retaining wall morerecommended. Application of and combine both of pile foundations and retaining wall is themost realistic option in consideration of ease of implementation at the field. From thecalculations have been done, in order to achieve stable conditions need retaining wall withdimensions of 2 meters high with 2,5 meters of width. DPT is supported by two piles of eachcross-section with 0.3 meters of diameter along 10 meters with 1-meter in space. Abstrak: Gunung Tugel adalah salah satu daerah yang terletak di Kecamatan PatikrajaKabupaten Banyumas bagian selatan. Kondisi topografi daerah tersebut sebagian besar berupapegunungan dengan kemiringan yang bervariasi dari landai sampai curam. Hal inimenyebabkan banyak daerah di wilayah Gunung Tugel yang berpotensi terjadi bencana tanahlongsor. Pada tahun 2015, peristiwa longsor kembali terjadi di ruas Jalan Gunung Tugel.Kelongsoran yang terjadi sepanjang 70 meter pada separuh badan jalan tersebut menyebabkanarus lalu lintas patikraja-purwokerto menjadi terganggu. Untuk memperbaiki kerusakan jalandan mencegah kelongsoran kembali, diperlukan analisis perkuatan tanah terhadap lerengtersebut. Studi analisis penanggulangan kelongsoran jalan yang terjadi di Gunung Tugel inidilakukan dengan tiga tahapan. Tahapan pertama adalah investigasi lapangan untukmengetahui kondisi lokasi dan dimensi longsor serta mengambil sampel tanah di lapangan.Tahap kedua adalah melakukan pengujian parameter tanah dan analisis data yang diperolehdari lapangan. Tahapan yang terakhir adalah analisis penanggulangan longsor denganmenggunakan data yang diperoleh dari tahapan sebelumnya. Pada penelitan ini, akanditerapkan tiga variasi perkuatan lereng yaitu dinding penahan tanah (DPT), turap dan DPTyang dikombinasikan dengan pondasi tiang. Analisis stabilitas lereng dilakukan dengan metodekeseimbangan batas. Berdasarkan hasil analisis yang dilakukan terhadap ketiga variasiperkuatan, DPT dengan kombinasi tiang pancang lebih direkomendasikan. Penerapan DPTyang dikombinasikan dengan minipile merupakan pilihan yang paling realistis denganpertimbangan tingkat kemudahan pelaksanaan di lapangan. Dari perhitungan yang telahdilakukan, untuk mencapai kondisi stabil diperlukan DPT dengan dimensi tinggi 2 meterdengan lebar bawah 2,5 meter. DPT tersebut ditopang oleh dua tiang tiap penampangmelintang dengan diameter 0,3 meter sepanjang 10 meter dengan jarak antar tiang 1 meter.kata kunci: tanah longsor, perkuatan tanah, metode keseimbangan batas

scholarly journals The Hydromechanical Interplay in the Simplified Three-Dimensional Limit Equilibrium Analyses of Unsaturated Slope Stability

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 73
Author(s):  
Panagiotis Sitarenios ◽  
Francesca Casini
Keyword(s):  
Analytical Solution ◽  
Slope Stability ◽  
Slope Failure ◽  
Failure Modes ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Three Dimensional ◽  
Stability Limit ◽  
Smooth Transition

This paper presents a three-dimensional slope stability limit equilibrium solution for translational planar failure modes. The proposed solution uses Bishop’s average skeleton stress combined with the Mohr–Coulomb failure criterion to describe soil strength evolution under unsaturated conditions while its formulation ensures a natural and smooth transition from the unsaturated to the saturated regime and vice versa. The proposed analytical solution is evaluated by comparing its predictions with the results of the Ruedlingen slope failure experiment. The comparison suggests that, despite its relative simplicity, the analytical solution can capture the experimentally observed behaviour well and highlights the importance of considering lateral resistance together with a realistic interplay between mechanical parameters (cohesion) and hydraulic (pore water pressure) conditions.

Analysis of Unstable Rock-Mass Stability Based on Limit Equilibrium Method and Strength Reduction Method

2016 ◽  
Vol 858 ◽  
pp. 73-80
Author(s):  
Ying Kong ◽  
Hua Peng Shi ◽  
Hong Ming Yu
Keyword(s):  
Rock Mass ◽  
Failure Mode ◽  
Posterior Margin ◽  
Reduction Method ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Strength Reduction ◽  
Strength Reduction Method ◽  
Rock Masses ◽  
Unstable Rock

With the slope unstable rock masses of a stope in Longsi mine, Jiaozuo City, China as the target, we computed and analyzed the stability of unstable rock masses using a limit equilibrium method (LEM) and a discrete element strength reduction method (SRM). Results show that the unstable rock masses are currently stable. Under the external actions of natural weathering, rainfall and earthquake, unstable rock mass 1 was manifested as a shear slip failure mode, and its stability was controlled jointly by bedding-plane and posterior-margin steep inclined joints. In comparison, unstable rock mass 2 was manifested as a tensile-crack toppling failure mode, and its stability was controlled by the perforation of posterior-margin joints. From the results of the 2 methods we find the safety factor determined from SRM is larger, but not significantly, than that from LEM, and SRM can simulate the progressive failure process of unstable rock masses. SRM also provides information about forces and deformation (e.g. stress-strain, and displacement) and more efficiently visualizes the parts at the slope that are susceptible to instability, suggesting SRM can be used as a supplementation of LEM.

scholarly journals Influence of Earthquakes on Landslide Susceptibility in a Seismic Prone Catchment in Central Asia

2021 ◽  
Vol 11 (9) ◽  
pp. 3768
Author(s):  
Fengqing Li ◽  
Isakbek Torgoev ◽  
Damir Zaredinov ◽  
Marina Li ◽  
Bekhzod Talipov ◽  
...  
Keyword(s):  
Central Asia ◽  
Landslide Susceptibility ◽  
Environmental Variables ◽  
Limit Equilibrium ◽  
Explanatory Power ◽  
Equilibrium Analysis ◽  
Annual Precipitation ◽  
Earthquake Scenario ◽  
Earthquake Scenarios ◽  
Local Decision

Central Asia is one of the most challenged places, prone to suffering from various natural hazards, where seismically triggered landslides have caused severe secondary losses. Research on this problem is especially important in the cross-border Mailuu-Suu catchment in Kyrgyzstan, since it is burdened by radioactive legacy sites and frequently affected by earthquakes and landslides. To identify the landslide-prone areas and to quantify the volume of landslide (VOL), Scoops3D was selected to evaluate the slope stability throughout a digital landscape in the Mailuu-Suu catchment. By performing the limit equilibrium analysis, both of landslide susceptibility index (LSI) and VOL were estimated under five earthquake scenarios. The results show that the upstream areas were more seismically vulnerable than the downstream areas. The susceptibility level rose significantly with the increase in earthquake strength, whereas the VOL was significantly higher under the extreme earthquake scenario than under the other four scenarios. After splitting the environmental variables into sub-classes, the spatial variations of LSI and VOL became more clear: the LSI reduced with the increase in elevation, slope, annual precipitation, and distances to faults, roads, and streams, whereas the highest VOL was observed in the areas with moderate elevations, high precipitation, grasslands, and mosaic vegetation. The relative importance analysis indicated that the explanatory power reduced with the increase in earthquake level and it was significant higher for LSI than for VOL. Among nine environmental variables, the distance to faults, annual precipitation, slope, and elevation were identified as important triggers of landslides. By a simultaneous assessment of both LSI and VOL and the identification of important triggers, the proposed modelling approaches can support local decision-makers and householders to identify landslide-prone areas, further design proper landslide hazard and risk management plans and, consequently, contribute to the resolution of transboundary pollution conflicts.

Limit equilibrium theory-based investigation on the critical tension crack depth in loess slope

2021 ◽  
Vol 80 (9) ◽  
Author(s):  
Linxuan Zhu ◽  
Zhijun Zhou ◽  
Lei Chen ◽  
Tianyu Xu ◽  
Zhipeng Zhang ◽  
...  
Keyword(s):  
Limit Equilibrium ◽  
Crack Depth ◽  
Equilibrium Theory ◽  
Tension Crack ◽  
Limit Equilibrium Theory ◽  
Loess Slope ◽  
Critical Tension

scholarly journals Optimal profile for concave slopes under static and seismic conditions

2016 ◽  
Vol 53 (9) ◽  
pp. 1522-1532 ◽  
Author(s):  
Farshid Vahedifard ◽  
Shahriar Shahrokhabadi ◽  
Dov Leshchinsky
Keyword(s):  
Limit Equilibrium ◽  
Stable Configuration ◽  
Preliminary Evaluation ◽  
Construction Technology ◽  
Stability Of Slopes ◽  
Optimal Profile ◽  
Stabilized Soil ◽  
The Stability ◽  
Comparison Of The Results ◽  
The Impact

This study presents a methodology to determine the stability and optimal profile for slopes with concave cross section under static and seismic conditions. Concave profiles are observed in some natural slopes suggesting that such geometry is a more stable configuration. In this study, the profile of a concave slope was idealized by a circular arc defined by a single variable, the mid-chord offset (MCO). The proposed concave profile formulation was incorporated into a limit equilibrium–based log spiral slope stability method. Stability charts are presented to show the stability number, MCO, and mode of failure for homogeneous slopes corresponding to the most stable configuration under static and pseudostatic conditions. It is shown that concave profiles can significantly improve the stability of slopes. Under seismic conditions, the impact of concavity is most pronounced. Good agreement was demonstrated upon comparison of the results from the proposed method against those attended from a rigorous upper bound limit analysis. The proposed methodology, along with recent advances in construction technology, can be employed to use concave profiles in trenches, open mine excavations, earth retaining systems, and naturally cemented and stabilized soil slopes. The results presented provide a useful tool for preliminary evaluation for adopting such concave profiles in practice.

scholarly journals Observations on Limit Equilibrium–Based Slope Reliability Problems with Inclined Weak Seams

2010 ◽  
Vol 136 (10) ◽  
pp. 1220-1233 ◽  
Author(s):  
Jianye Ching ◽  
Kok-Kwang Phoon ◽  
Yu-Gang Hu
Keyword(s):  
Limit Equilibrium
Sign in / Sign up

Export Citation Format

Share Document