Study on the Influence of Rainfall Condition on the Stability of Railway Slope

2017 ◽  
Author(s):  
Bo Song ◽  
Xiao-Min Hao
Keyword(s):  
Rainfall Condition ◽  
The Stability

Stability Analysis of Side Slope under Normal and Rainfall Conditions

2013 ◽  
Vol 275-277 ◽  
pp. 1383-1388
Author(s):  
Cheng Liang Zhang ◽  
Lei Liu ◽  
Chun Wang
Keyword(s):  
Numerical Simulation ◽  
Simulation Method ◽  
Unstable State ◽  
Electrical Method ◽  
Rainfall Condition ◽  
Long Term Stability ◽  
Side Slope ◽  
Numerical Simulation Method ◽  
The Stability ◽  
The Impact

The paper studied a side slope engineering of highway in K29+450~K29+900 sections by making an on-site survey of landform and geological features of the side slope. By combining drilling, high-density electrical method and numerical simulation method, the depth and range of the sliding surface were determined. The stability of the side slope after an excavation in a normal and a rainfall conditions was analyzed using numerical simulation method, and simulation results show that in the normal condition the safety factor of the side slope is 1.12, and it is 1.05 in the rainfall condition; the distribution of plastic zones is wide, especially in the rainfall condition, the side slope has a large deformation and is in an unstable state. When a program of side slope reinforcement is chosen, the impact under rainfall condition should be considered in order to ensure long-term stability of side slope.

scholarly journals Proposal of the Simple Simulation Method to Estimate the Stability of Slope Surface Layer under Rainfall Condition

2013 ◽  
Vol 8 (4) ◽  
pp. 579-595 ◽  
Author(s):  
Yoshifumi ASANO ◽  
Shunzo KAWAJIRI ◽  
Osamu NUNOKAWA ◽  
Naoyuki OHTA ◽  
Tomoyasu SUGIYAMA ◽  
...  
Keyword(s):  
Surface Layer ◽  
Simulation Method ◽  
Slope Surface ◽  
Rainfall Condition ◽  
Simple Simulation ◽  
Stability Of Slope ◽  
The Stability

Numerical Analysis of Deformation and Stability of Rock Slope under Rainfall Condition

2012 ◽  
Vol 594-597 ◽  
pp. 2506-2511
Author(s):  
Bing Hua Zhao ◽  
Shi Ping Zhang
Keyword(s):  
Rock Slope ◽  
Friction Angle ◽  
Element Model ◽  
Rainfall Condition ◽  
Deformation Law ◽  
Stability Of Slope ◽  
Stress And Deformation ◽  
Set Up ◽  
The Stability ◽  
Stability Of Rock Slope

Combining an example of rock slope engineering, the finite element model of excavation, reinforcement with rainfall infiltration conditions is built up. The process of stage excavation and reinforcement of the slope are simulated, and the stress and deformation law and displacement change of the slope during each stage period are analyzed, and the stability of slope is evaluated under some conditions. Moreover, the discontinuous deformatioanalysis model is set up, the limited internal friction angle of the sliding face of slope is obtained, and the slope stability is evaluated. It was shown that the conclusion of two methods was consistent, and the slope was basically stable.

Open discussion

1982 ◽  
Vol 99 ◽  
pp. 605-613
Author(s):  
P. S. Conti
Keyword(s):  
Buenos Aires ◽  
Large Mass ◽  
List Type ◽  
Common Phenomenon ◽  
Open Discussion ◽  
The Stability ◽  
Ring Nebulae

Conti: One of the main conclusions of the Wolf-Rayet symposium in Buenos Aires was that Wolf-Rayet stars are evolutionary products of massive objects. Some questions:–Do hot helium-rich stars, that are not Wolf-Rayet stars, exist?–What about the stability of helium rich stars of large mass? We know a helium rich star of ∼40 MO. Has the stability something to do with the wind?–Ring nebulae and bubbles : this seems to be a much more common phenomenon than we thought of some years age.–What is the origin of the subtypes? This is important to find a possible matching of scenarios to subtypes.

Symmetric Multistep Methods Revisited: II. Numerical Experiments

1999 ◽  
Vol 173 ◽  
pp. 309-314 ◽  
Author(s):  
T. Fukushima
Keyword(s):  
Multistep Methods ◽  
Computational Time ◽  
Integration Time ◽  
Implicit Methods ◽  
Symmetric Methods ◽  
Celestial Bodies ◽  
The Stability ◽  
Predictor Corrector ◽  
Symmetric Multistep Methods ◽  
Integration Errors

AbstractBy using the stability condition and general formulas developed by Fukushima (1998 = Paper I) we discovered that, just as in the case of the explicit symmetric multistep methods (Quinlan and Tremaine, 1990), when integrating orbital motions of celestial bodies, the implicit symmetric multistep methods used in the predictor-corrector manner lead to integration errors in position which grow linearly with the integration time if the stepsizes adopted are sufficiently small and if the number of corrections is sufficiently large, say two or three. We confirmed also that the symmetric methods (explicit or implicit) would produce the stepsize-dependent instabilities/resonances, which was discovered by A. Toomre in 1991 and confirmed by G.D. Quinlan for some high order explicit methods. Although the implicit methods require twice or more computational time for the same stepsize than the explicit symmetric ones do, they seem to be preferable since they reduce these undesirable features significantly.

Uniformity of Magnification from Different Electron Microscopes

1967 ◽  
Vol 25 ◽  
pp. 32-33
Author(s):  
Godfrey C. Hoskins ◽  
V. Williams ◽  
V. Allison
Keyword(s):  
Diffraction Grating ◽  
The Other ◽  
Carbon Replica ◽  
Electron Microscopes ◽  
The Stability

The method demonstrated is an adaptation of a proven procedure for accurately determining the magnification of light photomicrographs. Because of the stability of modern electrical lenses, the method is shown to be directly applicable for providing precise reproducibility of magnification in various models of electron microscopes.A readily recognizable area of a carbon replica of a crossed-line diffraction grating is used as a standard. The same area of the standard was photographed in Phillips EM 200, Hitachi HU-11B2, and RCA EMU 3F electron microscopes at taps representative of the range of magnification of each. Negatives from one microscope were selected as guides and printed at convenient magnifications; then negatives from each of the other microscopes were projected to register with these prints. By deferring measurement to the print rather than comparing negatives, correspondence of magnification of the specimen in the three microscopes could be brought to within 2%.

Effect of Improved ThO2 Particle Dispersion in Nickel on High-Temperature Strength

1970 ◽  
Vol 28 ◽  
pp. 444-445
Author(s):  
E. R. Kimmel ◽  
H. L. Anthony ◽  
W. Scheithauer
Keyword(s):  
High Temperature ◽  
Metal Matrix ◽  
Oxide Particle ◽  
Oxide Phase ◽  
Dislocation Motion ◽  
Particle Dispersion ◽  
High Temperature Strength ◽  
Strengthening Effect ◽  
Oxide Particles ◽  
The Stability

The strengthening effect at high temperature produced by a dispersed oxide phase in a metal matrix is seemingly dependent on at least two major contributors: oxide particle size and spatial distribution, and stability of the worked microstructure. These two are strongly interrelated. The stability of the microstructure is produced by polygonization of the worked structure forming low angle cell boundaries which become anchored by the dispersed oxide particles. The effect of the particles on strength is therefore twofold, in that they stabilize the worked microstructure and also hinder dislocation motion during loading.

An Analysis of Dissociation of Molecules in a High Resolution Electron Microscope

1973 ◽  
Vol 31 ◽  
pp. 486-487
Author(s):  
Mihir Parikh
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Cross Sections ◽  
Resolving Power ◽  
Peak Intensity ◽  
Molecular Film ◽  
Resolution Electron ◽  
Dissociation Cross Section ◽  
High Resolution Electron Microscope ◽  
The Stability

It is well known that the resolution of bio-molecules in a high resolution electron microscope depends not just on the physical resolving power of the instrument, but also on the stability of these molecules under the electron beam. Experimentally, the damage to the bio-molecules is commo ly monitored by the decrease in the intensity of the diffraction pattern, or more quantitatively by the decrease in the peaks of an energy loss spectrum. In the latter case the exposure, EC, to decrease the peak intensity from IO to I’O can be related to the molecular dissociation cross-section, σD, by EC = ℓn(IO /I’O) /ℓD. Qu ntitative data on damage cross-sections are just being reported, However, the microscopist needs to know the explicit dependence of damage on: (1) the molecular properties, (2) the density and characteristics of the molecular film and that of the support film, if any, (3) the temperature of the molecular film and (4) certain characteristics of the electron microscope used

Formation and Structure of Casein Micelles in Lactating Mammary Tissue

1970 ◽  
Vol 28 ◽  
pp. 150-151
Author(s):  
Robert J. Carroll ◽  
Marvin P. Thompson ◽  
Harold M. Farrell
Keyword(s):  
Size Distribution ◽  
G Protein ◽  
Milk Proteins ◽  
Mammary Tissue ◽  
Colloidal System ◽  
Casein Micelles ◽  
The Stability

Milk is an unusually stable colloidal system; the stability of this system is due primarily to the formation of micelles by the major milk proteins, the caseins. Numerous models for the structure of casein micelles have been proposed; these models have been formulated on the basis of in vitro studies. Synthetic casein micelles (i.e., those formed by mixing the purified αsl- and k-caseins with Ca2+ in appropriate ratios) are dissimilar to those from freshly-drawn milks in (i) size distribution, (ii) ratio of Ca/P, and (iii) solvation (g. water/g. protein). Evidently, in vivo organization of the caseins into the micellar form occurs in-a manner which is not identical to the in vitro mode of formation.

Sign in / Sign up

Export Citation Format

Share Document