Relative product yields in the one-photon and vibrationally mediated photolysis of isocyanic acid (HNCO)

2001 ◽  
Vol 114 (24) ◽  
pp. 10835-10844 ◽  
Author(s):  
H. Laine Berghout ◽  
Shizuka Hsieh ◽  
F. Fleming Crim
2001 ◽  
Vol 105 (38) ◽  
pp. 8658-8664 ◽  
Author(s):  
Geoffrey D. Smith ◽  
Francisco M. G. Tablas ◽  
Luisa T. Molina ◽  
Mario J. Molina

1994 ◽  
Vol 72 (3) ◽  
pp. 958-965 ◽  
Author(s):  
Jeffrey Dods ◽  
Paul Brumer ◽  
Moshe Shapiro

Extensive control over relative product yields is shown to result from weak laser photodissociation in a two-color coherent control scenario. Photodissociation takes place from a superposition state prepared by stimulated emission pumping. The method allows for control in the presence of laser phase jumps by using four-wave mixing to prepare the required laser frequencies. The near UV photodissociation of Na2, resulting in the Na(3s) + Na(4s) and the Na(3s) + Na(3d) products, is used to illustrate the method.


1969 ◽  
Vol 47 (21) ◽  
pp. 4041-4048 ◽  
Author(s):  
Karl R. Kopecky ◽  
Syamalarao Evani

Thermal decomposition of cis-3,6-diphenyl-3,4,5,6-tetrahydropyridazine, 1, (k = 5.6 × 10−4s−1 at 79.5°) results in the formation of about 60% styrene, 27% cis- and 13% trans-1,2-diphenylcyclobutane. The relative product yields vary little over the temperature range 64–133°. This indicates that 1 decomposes exclusively to the 1,4-diphenyl-1,4-butadiyl diradical, 2, and nitrogen. The diradical, 2, cannot be trapped by styrene and 1 is not an initiator of styrene polymerization. Therefore, 2 is not the radical intermediate responsible for the thermal initiation of styrene polymerization.


ChemInform ◽  
2010 ◽  
Vol 32 (50) ◽  
pp. no-no
Author(s):  
Geoffrey D. Smith ◽  
Francisco M. G. Tablas ◽  
Luisa T. Molina ◽  
Mario J. Molina

1975 ◽  
Vol 26 ◽  
pp. 395-407
Author(s):  
S. Henriksen

The first question to be answered, in seeking coordinate systems for geodynamics, is: what is geodynamics? The answer is, of course, that geodynamics is that part of geophysics which is concerned with movements of the Earth, as opposed to geostatics which is the physics of the stationary Earth. But as far as we know, there is no stationary Earth – epur sic monere. So geodynamics is actually coextensive with geophysics, and coordinate systems suitable for the one should be suitable for the other. At the present time, there are not many coordinate systems, if any, that can be identified with a static Earth. Certainly the only coordinate of aeronomic (atmospheric) interest is the height, and this is usually either as geodynamic height or as pressure. In oceanology, the most important coordinate is depth, and this, like heights in the atmosphere, is expressed as metric depth from mean sea level, as geodynamic depth, or as pressure. Only for the earth do we find “static” systems in use, ana even here there is real question as to whether the systems are dynamic or static. So it would seem that our answer to the question, of what kind, of coordinate systems are we seeking, must be that we are looking for the same systems as are used in geophysics, and these systems are dynamic in nature already – that is, their definition involvestime.


Author(s):  
P. R. Swann ◽  
W. R. Duff ◽  
R. M. Fisher

Recently we have investigated the phase equilibria and antiphase domain structures of Fe-Al alloys containing from 18 to 50 at.% Al by transmission electron microscopy and Mössbauer techniques. This study has revealed that none of the published phase diagrams are correct, although the one proposed by Rimlinger agrees most closely with our results to be published separately. In this paper observations by transmission electron microscopy relating to the nucleation of disorder in Fe-24% Al will be described. Figure 1 shows the structure after heating this alloy to 776.6°C and quenching. The white areas are B2 micro-domains corresponding to regions of disorder which form at the annealing temperature and re-order during the quench. By examining specimens heated in a temperature gradient of 2°C/cm it is possible to determine the effect of temperature on the disordering reaction very precisely. It was found that disorder begins at existing antiphase domain boundaries but that at a slightly higher temperature (1°C) it also occurs by homogeneous nucleation within the domains. A small (∼ .01°C) further increase in temperature caused these micro-domains to completely fill the specimen.


Author(s):  
J.A. Eades ◽  
E. Grünbaum

In the last decade and a half, thin film research, particularly research into problems associated with epitaxy, has developed from a simple empirical process of determining the conditions for epitaxy into a complex analytical and experimental study of the nucleation and growth process on the one hand and a technology of very great importance on the other. During this period the thin films group of the University of Chile has studied the epitaxy of metals on metal and insulating substrates. The development of the group, one of the first research groups in physics to be established in the country, has parallelled the increasing complexity of the field.The elaborate techniques and equipment now needed for research into thin films may be illustrated by considering the plant and facilities of this group as characteristic of a good system for the controlled deposition and study of thin films.


Author(s):  
M. G. Lagally

It has been recognized since the earliest days of crystal growth that kinetic processes of all Kinds control the nature of the growth. As the technology of crystal growth has become ever more refined, with the advent of such atomistic processes as molecular beam epitaxy, chemical vapor deposition, sputter deposition, and plasma enhanced techniques for the creation of “crystals” as little as one or a few atomic layers thick, multilayer structures, and novel materials combinations, the need to understand the mechanisms controlling the growth process is becoming more critical. Unfortunately, available techniques have not lent themselves well to obtaining a truly microscopic picture of such processes. Because of its atomic resolution on the one hand, and the achievable wide field of view on the other (of the order of micrometers) scanning tunneling microscopy (STM) gives us this opportunity. In this talk, we briefly review the types of growth kinetics measurements that can be made using STM. The use of STM for studies of kinetics is one of the more recent applications of what is itself still a very young field.


Author(s):  
M. R. Pinnel ◽  
A. Lawley

Numerous phenomenological descriptions of the mechanical behavior of composite materials have been developed. There is now an urgent need to study and interpret deformation behavior, load transfer, and strain distribution, in terms of micromechanisms at the atomic level. One approach is to characterize dislocation substructure resulting from specific test conditions by the various techniques of transmission electron microscopy. The present paper describes a technique for the preparation of electron transparent composites of aluminum-stainless steel, such that examination of the matrix-fiber (wire), or interfacial region is possible. Dislocation substructures are currently under examination following tensile, compressive, and creep loading. The technique complements and extends the one other study in this area by Hancock.The composite examined was hot-pressed (argon atmosphere) 99.99% aluminum reinforced with 15% volume fraction stainless steel wire (0.006″ dia.).Foils were prepared so that the stainless steel wires run longitudinally in the plane of the specimen i.e. the electron beam is perpendicular to the axes of the wires. The initial step involves cutting slices ∼0.040″ in thickness on a diamond slitting wheel.


Sign in / Sign up

Export Citation Format

Share Document