scholarly journals Integration of atomic layer deposited high-k dielectrics on GaSb via hydrogen plasma exposure

AIP Advances ◽  
2014 ◽  
Vol 4 (12) ◽  
pp. 127153 ◽  
Author(s):  
Laura B. Ruppalt ◽  
Erin R. Cleveland ◽  
James G. Champlain ◽  
Brian R. Bennett ◽  
Sharka M. Prokes
2020 ◽  
Vol 12 (14) ◽  
pp. 16639-16647 ◽  
Author(s):  
Alexander C. Kozen ◽  
Zachary R. Robinson ◽  
Evan R. Glaser ◽  
Mark Twigg ◽  
Thomas J. Larrabee ◽  
...  

2012 ◽  
Vol 101 (23) ◽  
pp. 231601 ◽  
Author(s):  
Laura B. Ruppalt ◽  
Erin R. Cleveland ◽  
James G. Champlain ◽  
Sharka M. Prokes ◽  
J. Brad Boos ◽  
...  

2002 ◽  
Vol 745 ◽  
Author(s):  
Kazuhiko Endo ◽  
Toru Tatsumi

ABSTRACTWe have successfully achieved an ALD like deposition of ZrO2 or HfO2 by using a MO precursor. The MO precursor used in this study was zirconium tetra-tert-butoxide (ZTB) Zr(t-OC(CH3)3)4 and hafnium tetra-tert-butoxide (HTB) Hf(t-OC(CH3)3)4. Because MO precursors are very sensitive to H2O, we used oxygen plasma as an oxidizer instead of H2O in order to reduce background H2O pressure and suppress the background reaction. As a result, we successfully achieved an ALD-like deposition proved by a self-limiting adsorption of MO precursor. The carbon content in the films was suppressed due to highly reactive oxygen plasma. The leakage current of the film with plasma oxidation is much lower than that of film with H2O oxidation. Thus, MO-ALD using a plasma oxidation is a promising candidate for the high-k gate deposition process.


Author(s):  
Dong Gun Kim ◽  
Cheol Hyun An ◽  
Sanghyeon Kim ◽  
Dae Seon Kwon ◽  
Junil Lim ◽  
...  

Atomic layer deposited TiO2- and Al2O3-based high-k gate insulator (GI) were examined for the Ge-based metal-oxide-semiconductor capacitor application. The single-layer TiO2 film showed a too high leakage current to be...


2015 ◽  
Vol 15 (1) ◽  
pp. 382-385
Author(s):  
Jun Hee Cho ◽  
Sang-Ick Lee ◽  
Jong Hyun Kim ◽  
Sang Jun Yim ◽  
Hyung Soo Shin ◽  
...  

1995 ◽  
Vol 386 ◽  
Author(s):  
J. E. Parmeter ◽  
R. J. Shul ◽  
P. A. Miller

ABSTRACTWe have used in situ Auger spectroscopic analysis to investigate the composition of InP surfaces cleaned in rf H2 plasmas and etched in rf H2/CH4/Ar plasmas. In general agreement with previous results, hydrogen plasma treatment is found to remove surface carbon and oxygen impurities but also leads to substantial surface phosphorus depletion if not carefully controlled. Low plasma exposure times and rf power settings minimize both phosphorus depletion and surface roughening. Surfaces etched in H2/CH4/Ar plasmas can show severe phosphorus depletion in high density plasmas leading to etch rates of ∼ 700 Å/min, but this effect is greatly reduced in lower density plasmas that produce etch rates of 30–400 Å/min.


1987 ◽  
Vol 50 (14) ◽  
pp. 921-923 ◽  
Author(s):  
J. C. Nabity ◽  
Michael Stavola ◽  
J. Lopata ◽  
W. C. Dautremont‐Smith ◽  
C. W. Tu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document