THE 3-C ACOUSTIC PROCESS—A NEW APPROACH TO PREDICTING ACOUSTIC WAVE PERFORMANCE IN SEDIMENTS

2000 ◽  
Vol 40 (1) ◽  
pp. 367
Author(s):  
M.J. Wiltshire ◽  
L.M. Huggard
Keyword(s):  
Acoustic Wave ◽  
Management Practices ◽  
Wave Theory ◽  
Field Studies ◽  
Acoustic Properties ◽  
P Wave ◽  
Performance Modelling ◽  
Seismic Attribute ◽  
Log Data

Acoustic wave performance modelling is of considerable interest to seismic interpreters. Conventional interpretative models employ continuous density log data to compute theoretical acoustic data. Their dependence on high quality density log data limits the application of these techniques to areas where good logs have been acquired. Such techniques are therefore commonly used in field studies, but are generally not used in exploration.This paper details a newly developed method of predicting acoustic compression wave performance, based on sequence compaction theory, elastic wave theory and established petrophysical relationships. This allows extension of the existing density log based p-wave velocity prediction methods into areas where log data are minimal and log quality is marginal.Applications of the technique include:improvements to the quality of acquired sonic data;improved velocity control, resulting in better quality synthetic seismograms and more precise control of time-depth conversion; andimproved seismic attribute mapping, offering possibilities of better drilling target selection.With application of the technique, many wells can now be used in which poor log data quality or absence of key logs previously prevented their use as well-to-seismic control points in basin modelling. The technique can be allied to MWD resistivity logging technology to allow continuous computation of acoustic properties and realtime correlation of drilling data to seismic. This results in better location of casing and logging points, and the design of more efficient logging programs, with benefits to both drilling safety and economics.The technique allows improvement in the quality of acquired data and acquisition economics, better utilisation of old data, and better engineering and geologic management practices in current exploration drilling. It has considerable potential for overcoming sonic log acquisition problems associated with poorly compacted rocks, and has application in many areas of sequence and basin studies.

A centre for the control of animal health and its management: veterinary field studies of dairy cows in Belgium

1999 ◽  
Vol 24 ◽  
pp. 193-196
Author(s):  
J. Detilleux ◽  
J. Arendt ◽  
A. Dewaele ◽  
F. Lomba ◽  
C. Doyen ◽  
...  
Keyword(s):  
Management Practices ◽  
Animal Health ◽  
International Health ◽  
Field Studies ◽  
Identification System ◽  
Animal Identification ◽  
Health Related ◽  
The Impact ◽  
Comfort Indices

AbstractIn 1998, the European Community, the Region Wallonne, and the Province du Hainaut funded the project known as the Centre for the control of animal health and its management (CESAM). This project was initiated in the Hainaut province of Belgium to answer problems encountered by cattle producers. Its overall goal is the identification of stages in the entire bovine production process where economic efficiency can be increased. A part of this project aims principally at the study of the impact of health-related problems on dairy production. For this part of the project, 32 veterinarians and 51 farmers started collecting data in the field. The methodology for data collection was based mainly on the harmony between the farmer and the veterinarian. Therefore, several procedures were implemented to ensure adequate motivation of both farmers and veterinarians. Farmers note all events of their livestock using a list, which contains disease events, preventive treatments, reasons for culling, and management practices. A veterinarian visits farms monthly to validate collected data and to discuss specific problems. During these farm visits, veterinarians collect body condition scores on adult cows. Veterinarians record also information on health problems they encounter during their normal practice using an international health data recording nomenclature. A national organization provides unique animal identification system. Production data will be recorded and feeding practices, milking procedures and barn comfort indices will be regularly investigated. All data will be collected on pre-printed documents, scanned at CESAM and centralized in a relational computer database. Criteria to evaluate the quality of the proposed methodology are presented.

scholarly journals Johnsongrass (Sorghum halepense (L.) Pers.) Interference, Control and Recovery under Different Management Practices and its Effects on the Grain Yield and Quality of Maize Crop

Agronomy ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 266
Author(s):  
Anestis Karkanis ◽  
Despoina Athanasiadou ◽  
Kyriakos Giannoulis ◽  
Konstantina Karanasou ◽  
Spyridon Zografos ◽  
...  
Keyword(s):  
Grain Yield ◽  
Aboveground Biomass ◽  
Management Practices ◽  
Field Studies ◽  
Interference Control ◽  
Maize Crop ◽  
Yield And Quality ◽  
Grain Yield And Quality ◽  
Crop Parameters

Maize is an important crop grown on significant acreage around the world, and a major constraint for its growth is weed interference. Thus, field studies were conducted to examine johnsongrass interference, control, and recovery under different management practices and its effects on maize. Our results indicated that the most johnsongrass aboveground biomass was recorded in the nontreated and weed-infested for 55 days after sowing (DAS) treatments, while the lowest values were in nicosulfuron treatments (48 and 60 g a.i./ha). Among the various herbicide treatments, the greatest johnsongrass aboveground biomass was recorded in the isoxaflutole (applied pre-emergence at 99 g a.i./ha) + 1 hoeing treatment. Johnsongrass aboveground biomass at 78–85 DAS was 1.4- to 6.0-fold greater than that at 55 DAS, revealing johnsongrass recovery after nicosulfuron treatments. Johnsongrass competition had a significant impact on maize growth and grain yield. The main crop parameters, such as aboveground biomass, grain yield, and protein content, were lowest in the nontreated and weed-infested for 55 DAS treatments, while the greatest values of these parameters were recorded in the weed-free and nicosulfuron treatments. In conclusion, our results indicated that timely and effective chemical control of johnsongrass is essential for improving grain yield and quality of maize.

The effects of a number of management practices on chiller beef production in Victoria

1960 ◽  
Vol 11 (6) ◽  
pp. 1101 ◽  
Author(s):  
TJ Robinson ◽  
NG Cameron
Keyword(s):  
Management Practices ◽  
Private Property ◽  
Field Studies ◽  
Supplementary Feeding ◽  
Season Of Birth ◽  
Beef Production ◽  
Factorial Experimental Design ◽  
Relative Contribution ◽  
Angus Cattle

Data are presented from a detailed factorial experiment conducted on a private property in the Western District of Victoria and involving 72 grade Aberdeen Angus cattle and their dams. The relative contribution to daily liveweight increase and economy of production of sex (steer v. spayed heifer), sire (stud v. grade bull), level of supplementary feeding (high v. moderate v. low), season of birth (autumn v. spring), and year of birth (1954 v. 1955 control v. 1955 stilboestrol-implanted) was determined. Season of birth (autumn>>spring, P < 0.001) was easily the greatest single factor affecting daily liveweight gain, carcass beef production per week, and cash value of beef produced per week, followed in order of importance by sex (steers>>heifers, P < 0.001), and level of supplementary feeding (high >moderate = low, P<0 .001). Quality of the sire had no demonstrable effect on any factor studied. Year of birth slightly affected cash value of beef produced per week (P<0.05), but only because of yearly price fluctuations. Interactions between the main variates were relatively unimportant, but the spring-born calf was much more dependent on heavy supplementary feeding than was the autumn-born. Economy of production was dependent on calving at the correct time (autumn) and the reduction of supplementary feeding to a minimum. The value of the factorial experimental design for field studies of this type is briefly discussed.

ANALISA POTENSI MINYAK DAN GAS BUMI DENGAN ATRIBUT SEISMIK PADA BATUAN KARBONAT LAPANGAN *ZEFARA* CEKUNGAN SUMATRA SELATAN

KURVATEK ◽  
2017 ◽  
Vol 1 (2) ◽  
pp. 21-31
Author(s):  
Fatimah Miharno
Keyword(s):  
Instantaneous Frequency ◽  
Carbonate Reservoir ◽  
Control Analysis ◽  
High Porosity ◽  
Hydrocarbon Accumulation ◽  
Seismic Attribute ◽  
Data Set ◽  
Log Data ◽  
Low Amplitude ◽  
Rms Amplitude

ABSTRACT*Zefara* Field formation Baturaja on South Sumatra Basin is a reservoir carbonate and prospective gas. Data used in this research were 3D seismik data, well logs, and geological information. According to geological report known that hidrocarbon traps in research area were limestone lithological layer as stratigraphical trap and faulted anticline as structural trap. The study restricted in effort to make a hydrocarbon accumulation and a potential carbonate reservoir area maps with seismic attribute. All of the data used in this study are 3D seismic data set, well-log data and check-shot data. The result of the analysis are compared to the result derived from log data calculation as a control analysis. Hydrocarbon prospect area generated from seismic attribute and are divided into three compartments. The seismic attribute analysis using RMS amplitude method and instantaneous frequency is very effective to determine hydrocarbon accumulation in *Zefara* field, because low amplitude from Baturaja reservoir. Low amplitude hints low AI, determined high porosity and high hydrocarbon contact (HC).  Keyword: Baturaja Formation, RMS amplitude seismic attribute, instantaneous frequency seismic attribute

Operations Research on the Female Village-Based Family Planning Worker Program of Pakistan

1998 ◽  
Vol 18 (3) ◽  
pp. 283-305
Author(s):  
Louisiana Lush ◽  
George P. Cernada ◽  
A. K. Ubaidur Rob ◽  
Mohammed Shafiq Arif ◽  
Minhaj Ul Haque ◽  
...  
Keyword(s):  
Family Planning ◽  
Operations Research ◽  
Technical Assistance ◽  
Field Studies ◽  
Family Planning Services ◽  
Training And Supervision ◽  
The Government ◽  
And Training ◽  
Broad Program

This article presents the results of a number of operations research studies (OR) of family planning services provided by a new cadre of female village-based family planning workers in Punjab Province, Pakistan. This cadre of workers, recruited nationwide, have been trained to visit women in their villages to provide information and family planning services. The studies were conducted as part of a broad program of technical assistance to the Government of Pakistan. Surveys investigated the quality of their training as well as attitudes among clients to the new program. They found that the program is developing well but there is room for improvement, particularly in counseling and training. Additional field studies are ongoing and recommendations for change have been incorporated in training and supervision. The program is expanding on a national scale.

scholarly journals Processes, Challenges and Optimisation of Rum Production from Molasses—A Contemporary Review

Fermentation ◽  
2021 ◽  
Vol 7 (1) ◽  
pp. 21
Author(s):  
Tinashe Mangwanda ◽  
Joel B. Johnson ◽  
Janice S. Mani ◽  
Steve Jackson ◽  
Shaneel Chandra ◽  
...  
Keyword(s):  
Management Practices ◽  
Scientific Literature ◽  
Asia Pacific ◽  
Yeast Strains ◽  
Challenges And Opportunities ◽  
The Caribbean ◽  
The Impact ◽  
Production Industry ◽  
Stringent Quality

The rum industry is currently worth USD 16 billion, with production concentrated in tropical countries of the Caribbean and Asia-Pacific regions. The primary feedstock for rum production is sugar cane molasses, a by-product of sugar refineries. The main variables known to affect rum quality include the composition of the molasses, the length of fermentation, and the type of barrels and length of time used for aging the rum. The goal of this review is to provide an overview of the impact of these variables on rum quality, and to highlight current challenges and opportunities in the production of rum from molasses. In order to achieve this, we review the relevant contemporary scientific literature on these topics. The major contemporary challenges in the rum production industry include minimising the effects of variability in feedstock quality, ensuring the fermentation process runs to completion, preventing microbial contamination, and the selection and maintenance of yeast strains providing optimum ethanol production. Stringent quality management practices are required to ensure consistency in the quality and organoleptic properties of the rum from batch to batch. Further research is required to fully understand the influences of many of these variables on the final quality of the rum produced.

244An automated beat exclusion algorithm to improve beat-to-beat P-wave morphology analysis

EP Europace ◽  
2020 ◽  
Vol 22 (Supplement_1) ◽  
Author(s):  
D Tachmatzidis ◽  
D Filos ◽  
I Chouvarda ◽  
A Tsarouchas ◽  
D Mouselimis ◽  
...  
Keyword(s):  
P Wave ◽  
Strongly Correlated ◽  
Wave Analysis ◽  
Morphology Analysis ◽  
Wave Morphology ◽  
History Of ◽  
Ectopic Beats ◽  
Rater Variability ◽  
Operator Workload

Abstract Background A manually beat-to-beat P-wave analysis has previously revealed the existence of multiple P-wave morphologies in patients with paroxysmal Atrial Fibrillation (AF) while on sinus rhythm, distinguishing them from healthy, AF free patients. Purpose The aim of this study was to investigate the effectiveness of an Automated Beat Exclusion algorithm (ABE) that excludes noisy or ectopic beats, replacing manual beat evaluation during beat-to-beat P-wave analysis, by assessing its effect on inter-rater variability and reproducibility. Methods Beat-to-beat P-wave morphology analysis was performed on 34 ten-minute ECG recordings of patients with a history of AF. Each recording was analyzed independently by two clinical experts for a total of four analysis runs; once with ABE and once again with the manual exclusion of ineligible beats. The inter-rater variability and reproducibility of the analysis with and without ABE were assessed by comparing the agreement of analysis runs with respect to secondary morphology detection, primary morphology ECG template and the percentage of both, as these aspects have been previously used to discriminate PAF patients from controls. Results Comparing ABE to manual exclusion in detecting secondary P-wave morphologies displayed substantial (Cohen"s k = 0.69) to almost perfect (k = 0.82) agreement. Area difference among auto and manually calculated main morphology templates was in every case &lt;5% (p &lt; 0.01) and the correlation coefficient was &gt;0.99 (p &lt; 0.01). Finally, the percentages of beats classified to the primary or secondary morphology per recording by each analysis were strongly correlated, for both main and secondary P-wave morphologies, ranging from ρ=0.756 to ρ=0.940 (picture) Conclusion The use of the ABE algorithm does not diminish inter-rater variability and reproducibility of the analysis. The primary and secondary P-wave morphologies produced by all analyses were similar, both in terms of their template and their frequency. Based on the results of this study, the ABE algorithm incorporated in the beat-to-beat P-wave morphology analysis drastically reduces operator workload without influencing the quality of the analysis. Abstract Figure.

Cased borehole acoustic-wave propagation with varying bonding conditions: Theoretical and experimental modeling

Geophysics ◽  
2019 ◽  
Vol 84 (4) ◽  
pp. D161-D169
Author(s):  
Can Jiang ◽  
Xue-Lian Chen ◽  
Yuan-Da Su ◽  
Xiao-Ming Tang
Keyword(s):  
Acoustic Wave ◽  
Wave Theory ◽  
Acoustic Measurements ◽  
Acoustic Wave Propagation ◽  
Velocity Change ◽  
Slip Boundary ◽  
Wave Measurements ◽  
Bonding Condition ◽  
Bond Evaluation ◽  
Cased Borehole

Acoustic measurements in cased boreholes are important for cement-bond evaluation behind the casing. In conjunction with a recently developed acoustic-wave theory using slip-boundary modeling, we carried out an experimental study for different cement-bond conditions. Four different cased-hole models were constructed, where the interface between the casing and the cement, and that between the cement and the formation, are decoupled or partially bonded to simulate the different cement bond conditions. An acoustic system is placed in the borehole to measure extensional casing waves along the borehole. By extracting the attenuation and velocity of casing waves from the experimental data, the bonding conditions were analyzed and compared with the theoretical modeling. The results indicate that, compared with the free-pipe situation, the casing waves are attenuated when there is some degree of bonding (good or poor) between the casing and the formation. However, when the poor bonding occurs at the cement-formation interface, the casing wave indicates significant velocity reduction and dispersion, the degree of the velocity change varying with the bonding condition. This wave phenomenon is predicted by the slip-boundary modeling. By adjusting the slip-boundary parameters in the modeling, the experimental results can be quantitatively modeled. These results are also confirmed by cased-hole acoustic logging data examples. The theoretical model can therefore be used to interpret cased-borehole acoustic-wave measurements.

Sign in / Sign up

Export Citation Format

Share Document