Comparison of the growth and meat tenderness of Brahman and F1 Senepol × Brahman steers

2014 ◽  
Vol 54 (10) ◽  
pp. 1867 ◽  
Author(s):  
T. J. Schatz ◽  
S. Thomas ◽  
G. Geesink
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Bos Taurus ◽  
Meat Tenderness ◽  
Feedlot Performance ◽  
Average Growth ◽  
Significant Difference ◽  
Brahman Steers ◽  
Viable Method

The growth of 116 Brahman (BRAH) and 96 F1 Senepol × Brahman (F1 SEN) steers grazing improved Buffel pasture in the Northern Territory was compared. Average growth was 10 kg higher in F1 SEN during grazing in the 9 months following weaning. Twenty-five steers of each genotype were compared for feedlot performance and meat quality. There was no significant difference in feedlot growth over 73 days in a commercial feedlot. On average F1 SEN carcasses graded two boning groups lower in the Meat Standards Australia (MSA) grading system. While M. longissimus samples from both genotypes were quite tender (shear force <4 kg), F1 SEN samples were found to be significantly more tender than BRAH (−0.44 kg) by shear force testing. These results indicate that crossbreeding with a tropically adapted Bos taurus breed, such as the Senepol, may be a viable method for cattle producers with Brahman herds in northern Australia to improve the meat quality of the cattle they produce.

scholarly journals Growth performance, and carcass and meat quality traits in progeny of Poll Nellore, Angus and Brahman sires under tropical conditions

2015 ◽  
Vol 55 (10) ◽  
pp. 1295 ◽  
Author(s):  
A. S. C. Pereira ◽  
F. Baldi ◽  
R. D. Sainz ◽  
B. L. Utembergue ◽  
H. L. J. Chiaia ◽  
...  
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Average Daily Gain ◽  
Carcass Weight ◽  
Zebu Cattle ◽  
Meat Tenderness ◽  
Marbling Score ◽  
Tropical Conditions ◽  
Significant Difference ◽  
Dressing Percentage

This study aimed to characterise progeny of sires representing major families in the Poll Nellore breed. Fourteen Poll Nellore sires, two Angus sires and one Brahman sire were mated by AI to ~400 multiparous Poll Nellore dams. Calves were raised and stocked on pasture in central Brazil until reaching ~18 months of age, then fed a sugarcane bagasse-based diet on an ad libitum basis until reaching market weight and finish (average 23 months). There were 236 Poll Nellore (N), 38 Angus × Poll Nellore (AN) and 31 Brahman × Poll Nellore (BN) calves born in total. The weaning and 423-day weight weights, and growth rates and pre- and post-weaning were greater (P < 0.05) in males than in female calves, and were influenced by breed and by sire within the N animals. The weaning weights were higher (P < 0.05) in AN and BN than in N calves. The 423-day weight weights were greater (P < 0.05) in AN calves, followed by BN, with straightbred N being lightest. Feedlot average daily gain was unaffected (P > 0.05) by sex or by sire within N, but was lowest (P < 0.05) in N cattle, and highest in AN and BN animals, which did not differ (P > 0.05). Heifers reached the end of the study with lower bodyweight (BW) and dressing percentage than steers, resulting in lower carcass weights, smaller longissimus muscle areas (LMA), but greater 12th to 13th rib backfat (BF) and similar marbling score and mean shear force. However, the proportion of carcasses grading Choice or Prime was numerically greater in heifers than in steers (23.6% vs 9.8%). AN cattle reached greater harvest weights than BN, and those were heavier than N cattle (P < 0.001). However, dressing percentages were lowest in AN animals, so that there was no significant difference in carcass weight between AN and BN cattle. AN carcasses also had greater LMA, BF and marbling scores than the N carcasses. The proportion of carcasses grading Choice or Prime was numerically greater in AN cattle than in the BN and N groups (25.9%, 11.8% and 15.9%, respectively). Steaks from AN calves were more tender than N steaks, with the BN steaks being intermediate. There was significant variation among N sires for final BW, dressing percentage, carcass weight, LMA and marbling score, but not for BF or mean shear force. The percentages of carcasses of N cattle grading Choice or Prime ranged from 0% to 61.5%. Three N sires produced progeny with greater than 40% of carcasses grading Choice or above (Berílio OB, Furador OB, and Litoral OB). Likewise, three N sires (Blitz OB, Furador OB and Sossego OB) had progeny with 67%, 62% and 75%, respectively, of steaks classified as tender. This study confirmed that Zebu cattle have inferior carcass and meat quality relative to AN crossbreds under tropical conditions, however there is substantial variation within the N breed for these traits, and several sires have a proportion of their progeny comparable in terms of meat tenderness to those of Angus sires.

scholarly journals Effect of repeated implants of oestradiol-17β on beef palatability in Brahman and Braham cross steers finished to different market end points

2008 ◽  
Vol 48 (11) ◽  
pp. 1434 ◽  
Author(s):  
J. M. Thompson ◽  
R. Polkinghorne ◽  
M. Porter ◽  
H. M. Burrow ◽  
R. A. Hunter ◽  
...  
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Bos Taurus ◽  
Bos Indicus ◽  
Meat Tenderness ◽  
Sensory Testing ◽  
Anterior Portion ◽  
End Points ◽  
Longissimus Lumborum ◽  
Quality Measurements

The effect of repeated implantation with 20 mg oestradiol-17β (Compudose 100) on carcass and meat quality traits was investigated using 478 Bos indicus and B. indicus × Bos taurus cross steers finished on either pasture or grain to achieve carcass weight for one of three market end points (domestic, 220 kg; Korean, 280 kg; or Japanese, 340 kg). In the oestradiol-17β treatment group, animals were administered implants at ~100-day intervals, with the number of implants administered to any steer ranging from one to eight. Cattle were slaughtered and at boning the anterior portion of the M. longissimus lumborum was removed and frozen after aging for 1 day for later objective meat quality measurements (shear force, compression and cook loss %). The adjoining portion was aged for 14 days before consumer sensory testing using the Meat Standards Australia protocols. Each sample was scored for tenderness, juiciness, like flavour and overall liking by 10 untrained consumers. Implanting increased carcass weights and ossification scores (P < 0.05) and reduced marbling scores in comparison to non-implanted carcasses. For tenderness, like flavour, overall liking and MQ4 scores there was a significant (P < 0.05) interaction between B. indicus content and oestradiol-17β treatment, whereby high B. indicus content cattle that were implanted with oestradiol-17β had the lowest sensory scores. The number of implants administered did not affect carcass weights or marbling scores, whereas ossification scores increased in carcasses as the number of implants increased. The number of implants administered had no effect (P > 0.05) on sensory scores, or objective meat tenderness.

scholarly journals Influence of electrical stimulation on carcass and meat quality of Kosher and conventionally slaughtered cattle

2015 ◽  
Vol 44 (5) ◽  
pp. 58-63
Author(s):  
B Agbeniga ◽  
EC Webb
Keyword(s):  
Electrical Stimulation ◽  
Meat Quality ◽  
Shear Force ◽  
Quality Attributes ◽  
Cooking Loss ◽  
Temperature Profiles ◽  
Group 12 ◽  
Significant Difference ◽  
Water Holding

In a previous study regarding the effects of Kosher and conventional slaughter techniques on carcass and meat quality of cattle, it was speculated that electrical stimulation may have affected some of the meat qualities. Therefore, the objective of this study was to investigate the effects of electrical stimulation (ES) and non-electrical stimulation (NES) on key carcass and meat quality attributes of cattle slaughtered by Kosher vs. conventional slaughter methods. Carcass pH and temperature profiles over a 24 h post mortem (pm) period, meat shear force and water holding capacity were investigated in feedlot type cattle of comparable weights and breed types. Results showed that the combined effects of slaughter methods did not influence the meat quality attributes, but there were differences within the slaughter groups. The effect of ES on carcass pH lasted longer within the conventionally slaughtered group (12 h), than in the Kosher slaughter group (6 h). Muscle samples from the ES groups for both slaughter methods were more tender. Electrical stimulation also had a significant effect on the cooking loss from Kosher meat, while there was no significant difference in meat from the conventional slaughter methods. The results show that ES influences certain meat and carcass quality attributes of cattle, based on the way cattle were slaughtered.Keywords: Carcass pH, cooking loss, drip loss, electrical stimulation, shear force, slaughter technique

The influence of chilling rate and fat cover on beef quality

2001 ◽  
Vol 81 (3) ◽  
pp. 321-330 ◽  
Author(s):  
J. L. Aalhus ◽  
J. A. M. Janz ◽  
A. K. W. Tong ◽  
S. D. M. Jones ◽  
W. M. Robertson
Keyword(s):  
Electrical Stimulation ◽  
Meat Quality ◽  
Shear Force ◽  
Backfat Thickness ◽  
Meat Tenderness ◽  
Beef Quality ◽  
Wide Range ◽  
Average Shear ◽  
Longissimus Lumborum

The economic advantages of rapid carcass chilling include reduced cooling time, increased carcass processing rate, and decreased shrink and drip losses; however, it may also reduce subsequent meat tenderness, especially in lean carcasses. The present study examined the effects of blast chilling and electrical stimulation on quality of longissimus lumborum (LL) and semimembranosus muscles from carcasses with a wide range in backfat thickness (0 to 69 mm). Despite promoting a wide range in postmortem pH and temperature decline, backfat thickness had a limited effect on meat quality. There was a decrease in the proportion of carcasses with very high (>35 N cm–2) shear values and a tendency (P = 0.12) for the average shear force to decrease in the LL as backfat depth increased. Unexpectedly, leaner carcasses had less shrink loss than fatter carcasses under blast chill conditions. While blast chilling resulted in slightly darker, tougher meat, electrical stimulation was able to reduce these effects. Neither early postmortem pH nor temperature at 10 h was clearly associated with a pattern in shear force, although high pH10 was associated with tough steaks. Blast chilling in combination with electrical stimulation can be recommended to industry as a means to reduce chilling times and shrink losses while producing meat quality that is as good as, or slightly superior to conventionally cooled carcasses. Key words: Beef quality, blast chilling, electrical stimulation, fat thickness

scholarly journals Frozen/thawed meat quality associated with muscle fiber characteristics of porcine longissimus thoracis et lumborum, psoas major, semimembranosus, and semitendinosus muscles

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Huilin Cheng ◽  
Sumin Song ◽  
Gap-Don Kim
Keyword(s):  
Meat Quality ◽  
Muscle Fiber ◽  
Shear Force ◽  
Muscle Fibers ◽  
Frozen Storage ◽  
Meat Color ◽  
Pork Meat ◽  
Psoas Major ◽  
The Relationship

AbstractTo evaluate the relationship between muscle fiber characteristics and the quality of frozen/thawed pork meat, four different muscles, M. longissimus thoracis et lumborum (LTL), M. psoas major (PM), M. semimembranosus (SM), and M. semitendinosus (ST), were analyzed from twenty carcasses. Meat color values (lightness, redness, yellowness, chroma, and hue) changed due to freezing/thawing in LTL, which showed larger IIAX, IIX, and IIXB fibers than found in SM (P < 0.05). SM and ST showed a significant decrease in purge loss and an increase in shear force caused by freezing/thawing (P < 0.05). Compared with LTL, SM contains more type IIXB muscle fibers and ST had larger muscle fibers I and IIA (P < 0.05). PM was the most stable of all muscles, since only its yellowness and chroma were affected by freezing/thawing (P < 0.05). These results suggest that pork muscle fiber characteristics of individual cuts must be considered to avoid quality deterioration during frozen storage.

Effect of feeding barley based diets on animal performance, carcass characteristics and meat quality of crossbred beef cattle with and without Wagyu genetics

1997 ◽  
Vol 77 (4) ◽  
pp. 655-662 ◽  
Author(s):  
P. S. Mir ◽  
D. R. C. Bailey ◽  
Z. Mir ◽  
S. D. M. Jones ◽  
T. Entz ◽  
...  
Keyword(s):  
Beef Cattle ◽  
Meat Quality ◽  
Shear Force ◽  
Average Daily Gain ◽  
Carcass Characteristics ◽  
Barley Grain ◽  
Crossbred Cattle ◽  
Target Weight ◽  
Meat Samples

Growth performance, carcass characteristics and meat quality of European and British crossbred (EBC; no Wagyu genetics; 28 heifers and 30 steers) cattle were compared with crossbred cattle with 75% Wagyu genetics (WC; seven heifers and 14 steers) to determine the influence of Wagyu genetics on marbling grade of beef cattle fed barley-based diets in a factorial design experiment. Weaned calves (250 d average age) were fed, one of two diets (diet 1, 35% barley grain; diet 2, 40% hay cubes on DM basis, with barley silage, protein and vitamin/mineral premix) for 84 d and then fed diet 1 until they weighed 394 to 432 kg. All cattle were finished on an 80% (DM basis) rolled barley diet and slaughtered. Carcasses were graded and samples procured for meat quality and Warner–Bratzler shear force determination. Number of days on backgrounding diets to arrive at target weight (380 kg) was greater (P < 0.05) for the WC cattle, owing to relatively lower ADG, but days on the finishing diet were fewer for these cattle, compared with EBC cattle. Warm carcass yield (dressing percent) was greater (P < 0.05), but backfat depth was lower (P < 0.05) for WC cattle relative to that of EBC cattle, yet proportion of lean meat yield was similar. Eighty three percent of WC cattle carcasses had Canada AAA (small or more) marbling grade compared with 13% for EBC cattle carcasses. Mean shear force of meat samples from EBC and WC cattle was 4.2 and 3.8 kg, respectively. Results indicated that the extent of carcass marbling can be increased by incorporating Wagyu genetics but age at slaughter of WC cattle was 19 d greater than that of EBC cattle and carcass size was reduced. Key words: Average daily gain, carcass characteristics, European and British crossbred, feed to gain ratio, meat quality, Wagyu crossbred cattle

scholarly journals Effect of heat stress on carcass and meat quality of indigenous sheep of Bangladesh

2014 ◽  
Vol 43 (2) ◽  
pp. 147-153 ◽  
Author(s):  
MS Rana ◽  
MA Hashem ◽  
S Akhter ◽  
M Habibullah ◽  
MH Islam ◽  
...  
Keyword(s):  
Heat Stress ◽  
Meat Quality ◽  
Carcass Characteristics ◽  
Muscle Area ◽  
Eye Muscle ◽  
Treatment Groups ◽  
Indigenous Sheep ◽  
Heat Treated ◽  
Significant Difference

The research was conducted to study the effect of heat stress on carcass characteristics and meat quality in indigenous sheep. Nine sheep were divided into three groups which were almost similar in age, sex and weight. Three groups were divided as zero hour (T0), four hours (T4) and eight hours (T8) heat exposure to direct sunlight. During experimental period temperature–humidity index (THI) value was calculated as 27.09 which indicated T4 and T8 groups were subjected to heat stress condition for at least four hours and eight hours respectively every day. Slaughter weight, body length and heart girth had no significant difference among the treatment groups. Dry matter, ash and ether extract had no significant difference (p>0.05) among the treatment groups but crude protein were increased with the increase of heat stress from T0 to T8 group (p<0.05). Drip loss was increased (p<0.05) in non-exposure group than treated groups but there is no significant result (p>0.05) found in pH and cooking loss. Carcass weight and eye muscle area had no significant difference (p>0.05) among the treatment groups but dressing percentage was decreased with the increase of time in heat treated groups (p<0.01). Significant difference (p<0.05) were found in weight of heart, kidney, lung + trachea and pluck between control and heat treated groups. The significant difference (p>0.05) in empty gut was found in gut with content and gut fill in heat treated groups. It can be concluded that heat stress had significant changes on carcass characteristics and meat quality of indigenous sheep.DOI: http://dx.doi.org/10.3329/bjas.v43i2.20717 Bang. J. Anim. Sci. 2014. 43 (2): 147-153

scholarly journals How does the dietary cottonseed hull affect the carcass characteristics and meat quality of young bulls finished in a high-concentrate diet?

2016 ◽  
Vol 38 (3) ◽  
pp. 301 ◽  
Author(s):  
Carlos Emanuel Eiras ◽  
Mariana Garcia Ornaghi ◽  
Maribel Velandia Valero ◽  
Dayane Cristina Rivaroli ◽  
Ana Guerrero ◽  
...  
Keyword(s):  
Aging Time ◽  
Meat Quality ◽  
Shear Force ◽  
Carcass Characteristics ◽  
Total Lipids ◽  
Lean Beef ◽  
Concentrate System ◽  
Cottonseed Hull ◽  
Meat Aging

This study evaluated the effects of diets composed by cottonseed hull and meat aging on carcass characteristics and meat quality from young bulls fed on a high-concentrate system. Thirty crossbred bulls were assigned in a complete randomized experimental factorial design with three diets (CH21: cottonseed hull 210 g kg-1on a DM basis, CH27: cottonseed hull 270 g kg-1on a DM basis and CH33: cottonseed hull 330 g kg-1on a DM basis) and different aging times (24 hours and 3, 7 and 14 days). Meat from CH27 diets presented smaller LM moisture content (p < 0.05). Total lipids were smaller in CH33 diet (p <0.05). At 24 hours, CH21 diet presented smaller LM cooking loss than other diets. The increasing aging time reduced the shear force (p < 0.001) on the LM. Meat from CH27 diet presented the highest luminosity (p < 0.05) and yellowness values (p < 0.001). Three or seven aging days presented smaller values of LM luminosity. Likewise, the increasing aging time presented greater (p < 0.05) yellowness within the LM. Lipid oxidation was lower from CH21 diet (p < 0.001). The fatty acid composition on LM was similar among diets. The use of cottonseed hull could be useful strategies to improve the meat quality and lean beef production. 

scholarly journals Physicochemical characteristics of meat of nellore steers supplemented with or without addition of lipids

2020 ◽  
Vol 36 (4) ◽  
Author(s):  
Clóvis Carlos Silveira Filho ◽  
Carlos Augusto de Alencar Fontes ◽  
Elizabeth Fonsêca Processi ◽  
Laila Cecília Ramos Bendia ◽  
Cláudio Teixeira Lombardi ◽  
...  
Keyword(s):  
Body Weight ◽  
Soybean Oil ◽  
Meat Quality ◽  
Soybean Meal ◽  
Shear Force ◽  
Sarcomere Length ◽  
Physicochemical Characteristics ◽  
Panicum Maximum

The aim of research was to evaluate the meat quality of Nellore young bulls in grazing supplemented with or without addition of lipids. Twenty–four young bulls, 301 ± 5.8 kg in body weight, were used in the experiment and randomly distributed into four groups according to treatment: only Panicum maximum cv. Mombasa grass; Mombasa grass with concentrated supplementation based on soybean meal; Mombasa grass with concentrate containing lipids from soybean oil; and Mombasa grass with concentrate containing lipids derived from soybean grains. There were no differences (P>0.05) between the treatments for temperature, pH, thawing, cooking and total losses, shear force, sarcomere length and collagen in bulls. Nellore young bulls raised in fertilized and irrigated Mombasa grass fed Mombasa grass only or supplemented with or without addition of lipids were similar regarding meat quality.

Effect of hypothyroidism on growth performance, carcass composition and meat quality of fat-tailed Lori-Bakhtiari lambs

2015 ◽  
Vol 55 (10) ◽  
pp. 1324 ◽  
Author(s):  
Yousef Baghcheghi ◽  
Ahmad Zare Shahneh ◽  
Mahdi Ganjkhanlou ◽  
Mahdi Khodaei Motlagh ◽  
Ali Reza Yousefi
Keyword(s):  
Growth Performance ◽  
Meat Quality ◽  
Conversion Efficiency ◽  
Shear Force ◽  
Carcass Composition ◽  
Feed Conversion ◽  
Feed Conversion Efficiency ◽  
Mild Hypothyroidism ◽  
Plasma Triiodothyronine

The aim of the present study was to investigate the effects of induction hypothyroidism by propylthiouracil (PTU) on the growth performance and meat quality of fat-tailed Lori-Bakhtiari lambs. Eighteen Lori-Bakhtiari male lambs were randomly assigned to one of three groups (n = 6) and received daily treatments (gavage) consisting of 0 (Control: C), 10 (Low: L) or 20 (High: H) mg PTU/kg bodyweight/day for 60 days. PTU decreased plasma triiodothyronine and thyroxine concentration in both L and H (P < 0.0001). Lambs treated with PTU (L and H) had lower feed intake (P < 0.004), feed conversion efficiency (P < 0.003), and greater intramuscular fat than C lambs (P < 0.035). Meat from the L and H lambs had lower cooking loss and shear force, and also higher L* (lightness) than C lambs (P < 0.004, P < 0.015 and P < 0.025, respectively). The meat of H and L lambs was more tender than C lambs (P < 0.032). However, the meat of H lambs required fewer chews before swallowing than C lambs (P < 0.041). Generally, induction of mild hypothyroidism appeared to improve feed conversion efficiency and meat quality of lambs.

Sign in / Sign up

Export Citation Format

Share Document