scholarly journals Rapidly deployable and morphable 3D mesostructures with applications in multimodal biomedical devices

2021 ◽  
Vol 118 (11) ◽  
pp. e2026414118
Author(s):  
Fan Zhang ◽  
Shupeng Li ◽  
Zhangming Shen ◽  
Xu Cheng ◽  
Zhaoguo Xue ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Scaling Laws ◽  
Magnetic Films ◽  
Biological Tissues ◽  
Inorganic Materials ◽  
Material Structure ◽  
Design Strategies ◽  
Stable States ◽  
Electromagnetic Actuation ◽  
Minimal Invasiveness

Structures that significantly and rapidly change their shapes and sizes upon external stimuli have widespread applications in a diversity of areas. The ability to miniaturize these deployable and morphable structures is essential for applications in fields that require high-spatial resolution or minimal invasiveness, such as biomechanics sensing, surgery, and biopsy. Despite intensive studies on the actuation mechanisms and material/structure strategies, it remains challenging to realize deployable and morphable structures in high-performance inorganic materials at small scales (e.g., several millimeters, comparable to the feature size of many biological tissues). The difficulty in integrating actuation materials increases as the size scales down, and many types of actuation forces become too small compared to the structure rigidity at millimeter scales. Here, we present schemes of electromagnetic actuation and design strategies to overcome this challenge, by exploiting the mechanics-guided three-dimensional (3D) assembly to enable integration of current-carrying metallic or magnetic films into millimeter-scale structures that generate controlled Lorentz forces or magnetic forces under an external magnetic field. Tailored designs guided by quantitative modeling and developed scaling laws allow formation of low-rigidity 3D architectures that deform significantly, reversibly, and rapidly by remotely controlled electromagnetic actuation. Reconfigurable mesostructures with multiple stable states can be also achieved, in which distinct 3D configurations are maintained after removal of the magnetic field. Demonstration of a functional device that combines the deep and shallow sensing for simultaneous measurements of thermal conductivities in bilayer films suggests the promising potential of the proposed strategy toward multimodal sensing of biomedical signals.

A Super-High-Resolution HVEM (H-1500) Newly Installed in NIRIM

1990 ◽  
Vol 48 (1) ◽  
pp. 142-143
Author(s):  
S. Horiuchi ◽  
Y. Matsui
Keyword(s):  
Magnetic Field ◽  
High Resolution ◽  
Chromatic Aberration ◽  
Inorganic Materials ◽  
Electron Gun ◽  
Resolving Power ◽  
National Budget ◽  
Voltage Electron ◽  
Specimen Holder ◽  
The Magnetic Field

A new high-voltage electron microscope (H-1500) specially aiming at super-high-resolution (1.0 Å point-to-point resolution) is now installed in National Institute for Research in Inorganic Materials ( NIRIM ), in collaboration with Hitachi Ltd. The national budget of about 1 billion yen including that for a new building has been spent for the construction in the last two years (1988-1989). Here we introduce some essential characteristics of the microscope.(1) According to the analysis on the magnetic field in an electron lens, based on the finite-element-method, the spherical as well as chromatic aberration coefficients ( Cs and Cc ). which enables us to reach the resolving power of 1.0Å. have been estimated as a function of the accelerating As a result of the calculaton. it was noted that more than 1250 kV is needed even when we apply the highest level of the technology and materials available at present. On the other hand, we must consider the protection against the leakage of X-ray. We have then decided to set the conventional accelerating voltage at 1300 kV. However. the maximum accessible voltage is 1500 kV, which is practically important to realize higher voltage stabillity. At 1300 kV it is expected that Cs= 1.7 mm and Cc=3.4 mm with the attachment of the specimen holder, which tilts bi-axially in an angle of 35° ( Fig.1 ). In order to minimize the value of Cc a small tank is additionally placed inside the generator tank, which must serve to seal the magnetic field around the acceleration tube. An electron gun with LaB6 tip is used.

scholarly journals Planetary Magnetic Fields and Habitability in Super Earths

2018 ◽  
Vol 27 (1) ◽  
pp. 183-231 ◽  
Author(s):  
Pablo Cuartas-Restrepo
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Scaling Laws ◽  
Thermal Evolution ◽  
Solid Core ◽  
Direct Influence ◽  
Physical Processes ◽  
Planetary Magnetic Fields ◽  
Planetary Magnetic Field ◽  
Planetary Dynamos

Abstract This work seeks to summarize some special aspects of a type of exoplanets known as super-Earths (SE), and the direct influence of these aspects in their habitability. Physical processes like the internal thermal evolution and the generation of a protective Planetary Magnetic Field (PMF) are directly related with habitability. Other aspects such as rotation and the formation of a solid core are fundamental when analyzing the possibilities that a SE would have to be habitable. This work analyzes the fundamental theoretical aspects on which the models of thermal evolution and the scaling laws of the planetary dynamos are based. These theoretical aspects allow to develop models of the magnetic evolution of the planets and the role played by the PMF in the protection of the atmosphere and the habitability of the planet.

scholarly journals Flux expulsion with dynamics

2016 ◽  
Vol 791 ◽  
pp. 568-588 ◽  
Author(s):  
Andrew D. Gilbert ◽  
Joanne Mason ◽  
Steven M. Tobias
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Lorentz Force ◽  
Differential Rotation ◽  
Time Scale ◽  
Scaling Laws ◽  
Dynamical Regime ◽  
Kinematic Evolution ◽  
Flux Expulsion ◽  
The Magnetic Field

In the process of flux expulsion, a magnetic field is expelled from a region of closed streamlines on a $TR_{m}^{1/3}$ time scale, for magnetic Reynolds number $R_{m}\gg 1$ ($T$ being the turnover time of the flow). This classic result applies in the kinematic regime where the flow field is specified independently of the magnetic field. A weak magnetic ‘core’ is left at the centre of a closed region of streamlines, and this decays exponentially on the $TR_{m}^{1/2}$ time scale. The present paper extends these results to the dynamical regime, where there is competition between the process of flux expulsion and the Lorentz force, which suppresses the differential rotation. This competition is studied using a quasi-linear model in which the flow is constrained to be axisymmetric. The magnetic Prandtl number $R_{m}/R_{e}$ is taken to be small, with $R_{m}$ large, and a range of initial field strengths $b_{0}$ is considered. Two scaling laws are proposed and confirmed numerically. For initial magnetic fields below the threshold $b_{core}=O(UR_{m}^{-1/3})$, flux expulsion operates despite the Lorentz force, cutting through field lines to result in the formation of a central core of magnetic field. Here $U$ is a velocity scale of the flow and magnetic fields are measured in Alfvén units. For larger initial fields the Lorentz force is dominant and the flow creates Alfvén waves that propagate away. The second threshold is $b_{dynam}=O(UR_{m}^{-3/4})$, below which the field follows the kinematic evolution and decays rapidly. Between these two thresholds the magnetic field is strong enough to suppress differential rotation, leaving a magnetically controlled core spinning in solid body motion, which then decays slowly on a time scale of order $TR_{m}$.

scholarly journals INFLUENCE OF MATERIAL STRUCTURE ON THE MAGNETOSTRICTIVE PROPERTIES OF A RADIATOR FOR DEFROSTING HEAT EXCHANGERS OF VENTILATION EQUIPMENT

2021 ◽  
Vol 4 (4) ◽  
pp. 5-10
Author(s):  
T. Il'ina ◽  
P. Orlov ◽  
A. Chizhov
Keyword(s):  
Magnetic Field ◽  
Heat Exchanger ◽  
External Magnetic Field ◽  
Boiling Point ◽  
Heat Exchangers ◽  
Material Structure ◽  
Moist Air ◽  
Mechanical Vibrations ◽  
Suitable Material

the article deals with the properties of ferromagnetics and their behaviour in an external magnetic field. The conditions under which magnetism occurs in materials are shown and the choice of material for a magneto-strictive emitter is justified. The composition and properties of permendur as the most suitable material for the manufacture of magnetostrictive radiators are presented. It is shown that for the manufacture of the magnetostrictor it is feasible to use electro-erosion equipment for cutting packages from permendur com-pared to the costly and cumbersome method of stamping in a matrix of a particular shape. Tests were carried out on a duralumin heat exchanger with artificial frostbite. The evaporator was fed with refrigerant at 0.22 MPa, which corresponds to the boiling point of R 410a refrigerant at 35°C, by means of a refrigerant line made of aluminium pipes. Frostbite was then produced by applying moist air using an ultrasonic steam gen-erator. Frost on the evaporator surface is discharged by means of a magnetostrictor mounted on the heat ex-changer. The proposed method allows for the most effective cleaning of the surfaces of heat exchangers of ventilation equipment from scale, fouling and other mechanical deposits by means of mechanical vibrations.

scholarly journals A THREE-PHASE INDUCTIVE SENSOR FOR IN VIVO MEASUREMENT OF ELECTRICAL ANISOTROPY OF BIOLOGICAL TISSUES

2014 ◽  
Vol 5 (1) ◽  
Author(s):  
Yukio Kosugi ◽  
Tadashi Takemae ◽  
Hiroki Takeshima ◽  
Atsushi Kudo ◽  
Kazuyuki Kojima ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electrical Conductivity ◽  
High Frequency ◽  
Reference Signal ◽  
Biological Tissues ◽  
Electrical Anisotropy ◽  
Conductivity Anisotropy ◽  
In Vivo Measurement ◽  
Surgical Operations

Biological tissue will have anisotropy in electrical conductivity, due to the orientation of muscular fibers or neural axons as well as the distribution of large size blood vessels. Thus, the in vivo measurement of electrical conductivity anisotropy can be used to detect deep-seated vessels in large organs such as the liver during surgeries. For diagnostic applications, decrease of anisotropy may indicate the existence of cancer in anisotropic tissues such as the white matter of the brain or the mammary gland in the breast. In this paper, we will introduce a new tri-phase induction method to drive rotating high-frequency electrical current in the tissue for the measurement of electrical conductivity anisotropy. In the measurement, three electromagnets are symmetrically placed on the tissue surface and driven by high-frequency alternative currents of 0 kHz, modulated with 1 kHz 3-phase signals. In the center area of three magnets, magnetic fields are superimposed to produce a rotating induction current. This current produces electrical potentials among circularly arranged electrodes to be used to find the conductivity in each direction determined by the electrode pairs. To find the horizontal and vertical signal components, the measured potentials are amplified by a 2ch lock-in amplifier phase-locked with the 1 kHz reference signal. The superimposed current in the tissue was typically 45 micro Amperes when we applied 150 micro Tesla of magnetic field. We showed the validity of our method by conducting in vitro measurements with respect to artificially formed anisotropic materials and preliminary in vivo measurements on the pig’s liver. Compared to diffusion tensor MRI method, our anisotropy sensor is compact and advantageous for use during surgical operations because our method does not require strong magnetic field that may disturb ongoing surgical operations.

Soft Magnetic Films and Wires for Magnetic Field Sensors

2008 ◽  
pp. 1708-1741
Author(s):  
A. S. Antonov ◽  
I. T. Iakubov ◽  
A. N. Lagarkov ◽  
A. L. Rakhmanov ◽  
I. A. Ryjikov
Keyword(s):  
Magnetic Field ◽  
Magnetic Films ◽  
Soft Magnetic ◽  
Magnetic Field Sensors ◽  
Soft Magnetic Films

scholarly journals Study of implants for intraoperative hyperthermia

2021 ◽  
Vol 67 (2) ◽  
pp. 233-245
Author(s):  
Andrei Kaprin ◽  
Ilya Vasilchenko ◽  
Alexey Osintsev ◽  
Vladimir Braginsky ◽  
Vitaliy Rynk ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Malignant Tumors ◽  
Combined Treatment ◽  
Heat Exposure ◽  
Biological Tissues ◽  
Alternating Magnetic Field ◽  
Magnetic Alloy ◽  
Ablation Therapy ◽  
Tumor Bed ◽  
Tissue Heating

At the present time hyperthermia is recognized as one of the most promising methods in the combined treatment of malignant tumors. Nevertheless, for the most of existing methods for heating of tumor tissues it is rather difficult to realize the exact localization of heat exposure. The aim of this study is to compare two types of implants for intraoperative local tumor bed hyperthermia carried out using induction heating in an alternating magnetic field of the sub-MHz range. Composite implants of the first type are created on the base of a self-curing plastic mass mixed with electrically conductive ferromagnetic particles. The second type of implant is a hollow object with thin walls that follows the shape of the tumor. Implants of this type are filled with a liquid metal non-magnetic alloy with melting point below room temperature. The model implants were heated in a self-designed inductor with a short cylindrical coil 35 cm in diameter. Biological tissues were modeled using an ultrasound gel. Experimental results show that both types of implants were heated in an external alternating magnetic field with a frequency of 90 kHz and an amplitude not exceeding 4 kA/m up to temperatures that allow both traditional hyperthermia (tissue heating to 41-45 °C) and thermal ablation therapy (tissue heating to temperatures above 50 °C). Good agreement between the experimental data and model numerical calculations was obtained.

Preparation of CPC-Fe3O4-MMT/PEG Magnetic Films via Layer-by-Layer Assembly under the Assistance of Magnetic Field

2016 ◽  
Vol 852 ◽  
pp. 1034-1038
Author(s):  
Li Nan Xu ◽  
Shu Chen Tu ◽  
Feng Zhu Lv ◽  
Qi An ◽  
Yi He Zhang
Keyword(s):  
Magnetic Field ◽  
Self Assembly ◽  
Present Method ◽  
Multilayer Film ◽  
Composite Films ◽  
Deposition Efficiency ◽  
Magnetic Films ◽  
Layer By Layer ◽  
Film Fabrication ◽  
Layer Assembly

Polyethylene glycol (PEG), which was not a traditional building block of layer by layer (LBL) self-assembly, was used to fabricate multilayer films by the combination of LBL and magnetic field induction. The UV-abs absorbance of the composite films increases linearly with the number of bilayers, indicating uniform fabrication of each layer. By this method, the multilayers can consist of up to 15 bilayers. The applied magnetic field not only enhances the compactness of the CPC-Fe3O4-MMT, but also improves the deposition efficiency of the films. The present method can be an effective method for multilayer film fabrication from non polyelectrolyte.

Zur Begrenzung der radial en Ausdehnung des Li chtbogenstromes durch ein axiales Magnetfeld. II. Skalengesetze und Vergleich mit Experimenten / On Limitation of the Radial Extent of the Arc Current by Means of an Axial Magnetic Field. II. Scaling Laws and Comparison with Experimental Results

1972 ◽  
Vol 27 (4) ◽  
pp. 652-670
Author(s):  
O. Klüber
Keyword(s):  
Magnetic Field ◽  
Cross Sections ◽  
Scaling Laws ◽  
Axial Magnetic Field ◽  
Angular Frequency ◽  
Model Calculations ◽  
Simple Geometry ◽  
Radial Extent ◽  
Arc Current ◽  
Field Lines

Abstract In an arc with superimposed axial magnetic field, radial current components cause a rotational motion of the plasma column and produce azimuthal Hall currents and hence electromotive forces such that the arc current is guided by the magnetic field lines. In the first part of this paper the steady-state plasma equations have been solved for a homogeneous plasma in simple geometry, allowance being made for finite viscosity. Here, scaling laws giving the radial extent of the arc current are obtained. In addition, electrodes with finite cross sections are treated. The results of model calculations agree well with experimental data. Generally, the model is applicable, if the angular frequency of the plasma is small compared with the ion gyration frequency.

Topological analysis of separation phenomena in liquid metal flow in sudden expansions. Part 2. Magnetohydrodynamic flow

2011 ◽  
Vol 674 ◽  
pp. 132-162 ◽  
Author(s):  
C. MISTRANGELO
Keyword(s):  
Magnetic Field ◽  
Liquid Metal ◽  
Scaling Laws ◽  
Numerical Study ◽  
Topological Analysis ◽  
Metal Flow ◽  
Magnetohydrodynamic Flow ◽  
Sudden Expansion ◽  
Internal Layers ◽  
Flow Topology

A numerical study has been carried out to analyse liquid metal flows in a sudden expansion of electrically conducting rectangular ducts under the influence of an imposed uniform magnetic field. Separation phenomena are investigated by selecting a reference Reynolds number and by increasing progressively the applied magnetic field. The magnetic effects leading to the reduction of the size of separation zones that form behind the cross-section enlargement are studied by considering modifications of flow topology, streamline patterns and electric current density distribution. In the range of parameters investigated, the magnetohydrodynamic flow undergoes substantial transitions from a hydrodynamic-like flow to one dominated by electromagnetic forces, where the influence of inertia and viscous forces is confined to thin internal layers aligned with the magnetic field and to boundary layers that form along the walls. Scaling laws describing the reattachment length and the pressure drop in the sudden expansion are derived for intense magnetic fields.

Sign in / Sign up

Export Citation Format

Share Document