Organic soilless greenhouse systems.

Author(s):  
Lynette Morgan

Abstract This chapter discusses the organic soilless greenhouse systems. It includes topics on organic greenhouse production, organic hydroponic systems, organic hydroponic nutrients, microbial mineralization of organic nutrients for hydroponics, anaerobic and aerobic processing of organic materials, vermicast and vermicomposting, use of vermiculture liquids in hydroponics, composting for organic nutrient processing and substrate preparation, organic materials for vermicast, composting and biodigester systems, auqaponics, organic hydroponic production systems, biofilms in hydroponic systems, nutrient amendmentsorganic certification in the USA, organic pest and disease control, hybrid systems, and issues commonly encountered with organic hydroponic systems.

Author(s):  
Lynette Morgan

Abstract This chapter discusses the organic soilless greenhouse systems. It includes topics on organic greenhouse production, organic hydroponic systems, organic hydroponic nutrients, microbial mineralization of organic nutrients for hydroponics, anaerobic and aerobic processing of organic materials, vermicast and vermicomposting, use of vermiculture liquids in hydroponics, composting for organic nutrient processing and substrate preparation, organic materials for vermicast, composting and biodigester systems, auqaponics, organic hydroponic production systems, biofilms in hydroponic systems, nutrient amendmentsorganic certification in the USA, organic pest and disease control, hybrid systems, and issues commonly encountered with organic hydroponic systems.


Horticulturae ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 68
Author(s):  
Yi-Ju Wang ◽  
Amanda J. Deering ◽  
Hye-Ji Kim

Our previous study reported that fresh produce grown in aquaponic and hydroponic systems can pose potential food safety hazards due to an accidental introduction of contaminated fish and cross-contamination between the systems. In this study, we examined the effects of plant species and age on the likelihood and level of internalization of Shiga toxin-producing Escherichia coli (STEC) in aquaponic and hydroponic systems. Four plant species, basil (Ocimum basilicum L. cv. Genovese), cilantro (Coriandrum Sativum L.), lettuce (Lactuca sativa cv. Cherokee), and kale (Brassica oleracea var. sabellica), received root damage treatment as seedlings before transplanting or mature plants at three weeks after transplanting by cutting off 1-cm tips of one-third of the roots. Enrichments and selective media were used for the isolation, and presumptive positive colonies were confirmed by PCR for the presence of stx1 gene in plant tissues, recirculating water, and fish feces collected at four weeks after transplanting. In hydroponic systems, STEC was found neither in the solution nor in the roots and leaves of all four plant species, possibly through improved sanitation and hygiene practices. However, consistent with our previous findings, STEC was found in the water, on the plant roots, and in the fish feces in aquaponic systems, even after thorough sanitation prior to the study. Regardless of plant age, STEC was internalized in the roots of all plant species when the roots were damaged, but there was no difference in the degree of internalization with STEC among plant species. STEC was present in the leaves only when seedlings received root damage treatment and were grown to maturity, indicating that root damage allows STEC to internalize in the roots within a week, but a longer period is required for STEC to internalize into the leaves. We concluded that root damage on seedlings can cause the internalization of E. coli O157:H7 in the edible parts of leafy vegetables and herbs in soilless production systems.


Author(s):  
Daniel P. Roberts ◽  
Nicholas M. Short ◽  
James Sill ◽  
Dilip K. Lakshman ◽  
Xiaojia Hu ◽  
...  

AbstractThe agricultural community is confronted with dual challenges; increasing production of nutritionally dense food and decreasing the impacts of these crop production systems on the land, water, and climate. Control of plant pathogens will figure prominently in meeting these challenges as plant diseases cause significant yield and economic losses to crops responsible for feeding a large portion of the world population. New approaches and technologies to enhance sustainability of crop production systems and, importantly, plant disease control need to be developed and adopted. By leveraging advanced geoinformatic techniques, advances in computing and sensing infrastructure (e.g., cloud-based, big data-driven applications) will aid in the monitoring and management of pesticides and biologicals, such as cover crops and beneficial microbes, to reduce the impact of plant disease control and cropping systems on the environment. This includes geospatial tools being developed to aid the farmer in managing cropping system and disease management strategies that are more sustainable but increasingly complex. Geoinformatics and cloud-based, big data-driven applications are also being enlisted to speed up crop germplasm improvement; crop germplasm that has enhanced tolerance to pathogens and abiotic stress and is in tune with different cropping systems and environmental conditions is needed. Finally, advanced geoinformatic techniques and advances in computing infrastructure allow a more collaborative framework amongst scientists, policymakers, and the agricultural community to speed the development, transfer, and adoption of these sustainable technologies.


2015 ◽  
pp. 45-52
Author(s):  
C. Poncet ◽  
C. Bresch ◽  
H. Fatnassi ◽  
L. Mailleret ◽  
A. Bout ◽  
...  

Geoderma ◽  
2021 ◽  
Vol 385 ◽  
pp. 114899
Author(s):  
Ya'nan Fan ◽  
Yanxia Zhang ◽  
Zhikun Chen ◽  
Xinkai Wang ◽  
Biao Huang

2017 ◽  
Vol 18 (2) ◽  
pp. 136-152 ◽  
Author(s):  
Jian Sun ◽  
Ximin Zeng ◽  
Xing-Ping Li ◽  
Xiao-Ping Liao ◽  
Ya-Hong Liu ◽  
...  

AbstractColistin, a peptide antibiotic belonging to the polymyxin family, is one of the last effective drugs for the treatment of multidrug resistant Gram-negative infections. Recent discovery of a novel mobile colistin resistance gene,mcr-1, from people and food animals has caused a significant public health concern and drawn worldwide attention. Extensive usage of colistin in food animals has been proposed as a major driving force for the emergence and transmission ofmcr-1; thus, there is a worldwide trend to limit colistin usage in animal production. However, despite lack of colistin usage in food animals in the USA,mcr-1-positiveEscherichia coliisolates were still isolated from swine. In this paper, we provided an overview of colistin usage and epidemiology ofmcr-1in food animals, and summarized the current status of mechanistic and evolutionary studies of the plasmid-mediated colistin resistance. Based on published information, we further discussed several non-colistin usage risk factors that may contribute to the persistence, transmission, and emergence of colistin resistance in an animal production system. Filling the knowledge gaps identified in this review is critical for risk assessment and risk management of colistin resistance, which will facilitate proactive and effective strategies to mitigate colistin resistance in future animal production systems.


2018 ◽  
Vol 226 ◽  
pp. 02019 ◽  
Author(s):  
Evgeniya P. Klyuchka ◽  
Viktor V. Radin ◽  
Leonid M. Groshev ◽  
Valeriy P. Maksimov

The fundamentals of an interdisciplinary approach to the design of greenhouse production systems are considered, in which biological objects (plants and humans) are present. The conceptual approach of the software solution is analyzed, synthesizing on the basis of the objectoriented concept such directions as disciplines on the construction of greenhouse production, dynamic simulation models, geoinformation systems. Based on the study of this issue, the conclusion was made about the advisability of applying an interdisciplinary approach for a comprehensive study of the projected complex biotechnical systems of greenhouse production.


2020 ◽  
Vol 10 (15) ◽  
pp. 5027 ◽  
Author(s):  
Erik Kučera ◽  
Oto Haffner ◽  
Peter Drahoš ◽  
Ján Cigánek ◽  
Roman Leskovský  ◽  
...  

For the development of modern complex production processes in Industry 4.0, it is appropriate to effectively use advanced mathematical models based on Petri nets. Due to their versatility in modeling discrete-event systems, Petri nets are an important support in creating new platforms for digitized production systems. The main aim of the proposed article is to design a new software tool for modeling and control of discrete-event and hybrid systems using Arduino and similar microcontrollers. To accomplish these tasks, a new tool called PN2ARDUINO based on Petri nets is proposed able to communicate with the microcontroller. Communication with the microcontroller is based on the modified Firmata protocol hence, the control algorithm can be implemented on all microcontrollers that support this type of protocol. The developed software tool was successfully verified in control of laboratory systems. In addition, it can be used for education and research purposes as it offers a graphical environment for designing control algorithms for hybrid and mainly discrete-event systems. The proposed software tool can improve education and practice in cyber-physical systems (Industry 4.0).


2020 ◽  
Vol 2020 (4) ◽  
Author(s):  
Abhiman Cheeyandira

Abstract Corona virus pandemic has affected all the 50 states in the USA. States such as NY, CA and WA being the most affected. According to the Centers for Disease Control and Prevention (CDC) website, as of 28 March 2020, the total number of cases in the USA is over 103 300 and number of deaths to 1668. In the coming weeks, COVID-19 rates are expected to begin skyrocketing and hit a peak in late April/May/June given lessons learned from China, Italy and others. COVID-19 has been declared a pandemic by the World Health Organization (WHO) as confirmed cases approach 575 444 patients with 26 654 deaths across over 160 countries, as of 28 March 2020. There is a lot of impact on management of the urgent and emergent cases. This article highlights the changes that are being made in delivering urgent and emergent surgical care during the pandemic.


Plant Disease ◽  
2020 ◽  
Vol 104 (6) ◽  
pp. 1841-1850
Author(s):  
Jerry E. Weiland ◽  
Carolyn. F. Scagel ◽  
Niklaus J. Grünwald ◽  
E. Anne Davis ◽  
Bryan R. Beck ◽  
...  

Rhododendron root rot is a severe disease that causes significant mortality in rhododendrons. Information is needed about the incidence and identity of soilborne Phytophthora and Pythium species causing root rot in Pacific Northwest nurseries in order to better understand the disease etiology and to optimize disease control strategies. The last survey focusing solely on soilborne oomycete pathogens in rhododendron production was conducted in 1974. Since then, advances in pathogen identification have occurred, new species may have been introduced, pathogen communities may have shifted, and little is known about Pythium species affecting this crop. Therefore, a survey of root-infecting Phytophthora and Pythium species was conducted at seven nurseries from 2013 to 2017 to (i) document the incidence of root rot damage at each nursery and stage of production, (ii) identify soilborne oomycetes infecting rhododendron, and (iii) determine whether there are differences in pathogen diversity among nurseries and production systems. Rhododendrons from propagation, container, and field systems were sampled and Phytophthora and Pythium species were isolated from the roots and collar region. Root rot was rarely evident in propagation systems, which were dominated by Pythium species. However, severe root rot was much more common in container and field systems where the genus Phytophthora was also more prevalent, suggesting that Phytophthora species are the primary cause of severe root rot and that most contamination by these pathogens comes in after the propagation stage. In total, 20 Pythium species and 11 Phytophthora species were identified. Pythium cryptoirregulare, Pythium aff. macrosporum, Phytophthora plurivora, and Phytophthora cinnamomi were the most frequently isolated species and the results showed that Phytophthora plurivora has become much more common than in the past. Phytophthora diversity was also greater in field systems than in propagation or container systems. Risks for Phytophthora contamination were commonly observed during the survey and included placement of potting media in direct contact with field soil, the presence of dead plants that could serve as continuous sources of inoculum, and the presence of excess water as a result of poor drainage, overirrigation, or malfunctioning irrigation equipment. In the past, research on disease development and root rot disease control in rhododendron focused almost exclusively on Phytophthora cinnamomi. More research is needed on both of these topics for the other root-infecting species identified in this survey.


Sign in / Sign up

Export Citation Format

Share Document