scholarly journals Effect of medicaments used in endodontic regeneration technique on push-out bond strength of MTA and Biodentine

2015 ◽  
Vol 30 (1) ◽  
pp. 140-144 ◽  
Author(s):  
Tugba Turk ◽  
Aleš Fidler
Keyword(s):  
Bond Strength ◽  
Endodontic Regeneration ◽  
Push Out

scholarly journals Effect of surface treatments on push-out bond strength of calcium silicate-based cements to fiber posts

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Amr M. Elnaghy ◽  
Ayman Mandorah ◽  
Ali H. Hassan ◽  
Alaa Elshazli ◽  
Shaymaa Elsaka
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Glass Fiber ◽  
Calcium Silicate ◽  
Surface Treatments ◽  
The Other ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Push Out ◽  
Effect Of Surface

Abstract Background To evaluate the effect of surface treatments on the push-out bond strength of Biodentine (BD) and white mineral trioxide aggregate (WMTA) to fiber posts. Methods Two brands of fiber posts were used: Reblida post; RP and RelyX post; RX. Each type of post (n = 80/group) was divided into four groups (n = 20/group) and exposed to surface treatment as follows: Control (no treatment), sandblasting (SB), hydrofluoric acid (HF), and TiF4 4 wt/v%. Each group was further subdivided into two subgroups (n = 10/subgroup) based on the type of CSCs used as follows: Subgroup A: BD and Subgroup B: WMTA. Push-out bond strength of BD and WMTA to glass fiber posts was assessed. Data were statistically analyzed using three-way ANOVA and Tukey’s test. A Weibull analysis was performed on the push-out bond strength data. Results BD showed higher bond strength than WMTA (P < 0.001). The push-out bond strength for posts treated with TiF4 4 wt/v% showed greater bond strength than the other surface treatments (P < 0.05). The BD/RP-TiF4 4 wt/v% showed the greater characteristic bond strength (σ0) (15.93) compared with the other groups. Surface treatments modified the surface topography of glass fiber posts. Conclusions The BD/RP-TiF4 4 wt/v% showed greater bond strength compared with the other groups. The TiF4 4 wt/v% surface treatment enhanced the bond strength of BD and WMTA to glass fiber posts than the other treatments. Surface treatment of fiber post with TiF4 4 wt/v% could be used to improve the bond strength with calcium silicate-based cements.

scholarly journals Research on bond–slip performance between pultruded glass fiber-reinforced polymer tube and nano-CaCO3 concrete

2020 ◽  
Vol 9 (1) ◽  
pp. 637-649 ◽  
Author(s):  
Zhan Guo ◽  
Qingxia Zhu ◽  
Wenda Wu ◽  
Yu Chen
Keyword(s):  
Bond Strength ◽  
Concrete Strength ◽  
Fiber Reinforced Polymer ◽  
Glass Fiber Reinforced Polymer ◽  
Bond Slip ◽  
Ordinary Concrete ◽  
Bond Performance ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Push Out

AbstractThe article describes an experimental study on the bond–slip performance between the pultruded glass fiber-reinforced polymer (GFRP) tube and the nano-CaCO3 concrete. Taking the nano-CaCO3 concrete strength and GFRP tube thickness as primary parameters, nine specimens were designed and tested to study the influence of these parameters on the bond strength of the specimens. Besides, three specimens filled with the ordinary concrete were also tested by using the push-out tests to make comparisons with the bond performance of the specimens filled with nano-CaCO3 concrete. A total of four push-out tests were conducted on each specimen. The experimental results indicate that there are two types of axial load–slip curves for each specimen in four push-out tests. Moreover, comparison of the results of the push-out tests in the same direction shows that the bond failure load of the specimen decreases with the increase in the number of push-out tests. Based on the analysis of the test results, it is shown that the bond performance between the GFRP tube and the nano-CaCO3 concrete is better than that between the GFRP tube and the ordinary concrete. Furthermore, as the nano-CaCO3 concrete strength increases, the bond strength of the specimens decreases, indicating that the concrete strength has a negative effect on the bond strength. When the nano-CaCO3 concrete strength is relatively smaller (C20), the bond strength of the specimens decreases with the increase in the thickness of the GFRP tube. However, when the nano-CaCO3 concrete strength is relatively larger (C30 and C40), the bond strength of the specimens increases as the thickness of the GFRP tube increases.

Finite element analysis and bond strength of a glass post to intraradicular dentin: Comparison between microtensile and push-out tests

2008 ◽  
Vol 24 (10) ◽  
pp. 1405-1411 ◽  
Author(s):  
Carlos J. Soares ◽  
Fernanda R. Santana ◽  
Carolina G. Castro ◽  
Paulo C.F. Santos-Filho ◽  
Paulo V. Soares ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Bond Strength ◽  
Element Analysis ◽  
Push Out

scholarly journals Micro Push-Out Bond Strength of Resin Composite to Dentin in Primary Dentition Using Three Universal Adhesives with Different pH: An In Vitro Study

2021 ◽  
Vol 11 (14) ◽  
pp. 6349
Author(s):  
Regina María Del Río Carrillo ◽  
Pedro Molinero-Mourelle ◽  
Vicente Vera ◽  
Pablo Romero Villaba ◽  
Elizabeth Casañas ◽  
...  
Keyword(s):  
Bond Strength ◽  
Resin Composite ◽  
In Vitro Study ◽  
Primary Dentition ◽  
Vitro Study ◽  
Deciduous Tooth ◽  
Universal Adhesives ◽  
Type Of Failure ◽  
Push Out

To evaluate the bond strength of different universal adhesives on deciduous tooth dentineand their relationship with the composition and potential of hydrogen (pH). Methods: An in vitromicro push-out test on 150 samples (n = 50) per group per adhesive, namely, Adhese Universal(ADH; Ivoclar Vivadent), Futurabond U (FUT; Voco GmbH) (Test), and Scotchbond Universal withpre-conditioning (SCO; 3M) (Control), to record bond strength (BS) and type of adhesive failure.Results: The results of the different adhesives (megapascals (MPa)) varied, showing no statisticalsignificance. The corresponding averages are in MPa: ADH, 13.66 2.81; FUT, 14.48 2.88; SCO,14.98 3.96. Additionally, the frequency of type of failure was as follows: mixed (60.7%), adhesive(27.3%), and cohesive (12%). Conclusions: SCO, with a pH of 2.7, showed greater resistance tofracture, while FUT, with a pH of 2.3 and no pre-conditioning, approached the same values, being aone-step adhesive. No relationship was found between failure and type of adhesive.

Effect of root canal irrigants on push-out bond strength of endodontic sealers: a systematic review

2020 ◽  
pp. 1-21
Author(s):  
Lara Dotto ◽  
Gabriel Kalil Rocha Pereira ◽  
Alvin Tomm ◽  
Ataís Bacchi ◽  
Rafael Sarkis-Onofre
Keyword(s):  
Systematic Review ◽  
Bond Strength ◽  
Root Canal ◽  
Root Canal Irrigants ◽  
Endodontic Sealers ◽  
Push Out

scholarly journals Influence of Different Conditioning Treatments on The Bond Integrity of Root Dentin to rGO Infiltrated Dentin Adhesive. SEM, EDX, FTIR and MicroRaman Study

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1555
Author(s):  
Firas Alqarawi ◽  
Mazen Alkahtany ◽  
Khalid Almadi ◽  
Afnan Gassem ◽  
Faris Alshahrani ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Bond Strength ◽  
Strength Test ◽  
Control Group ◽  
Micro Raman Spectroscopy ◽  
Fiber Posts ◽  
Root Canal Disinfection ◽  
Reduced Graphene ◽  
Root Dentin ◽  
Push Out

The present study aimed to synthesize and equate the mechanical properties and dentin interaction of two adhesives; experimental adhesive (EA) and 5 wt.% reduced graphene oxide rGO) containing adhesive. Scanning electron microscopy (SEM)-Energy-dispersive X-ray spectroscopy (EDX), Micro-Raman spectroscopy, push-out bond strength test, and Fourier Transform Infrared (FTIR) spectroscopy were employed to study nano-bond strength, degree of conversion (DC), and adhesive-dentin interaction. The EA was prepared, and rGO particles were added to produce two adhesive groups, EA-rGO-0% (control) and rGO-5%. The canals of sixty roots were shaped and prepared, and fiber posts were cemented. The specimens were further alienated into groups based on the root canal disinfection technique, including 2.5% sodium hypochlorite (NaOCl), Photodynamic therapy (PDT), and ER-CR-YSGG laser (ECYL). The rGO nanoparticles were flake-shaped, and EDX confirmed the presence of carbon (C). Micro-Raman spectroscopy revealed distinct peaks for graphene. Push-out bond strength test demonstrated highest values for the EA-rGO-0% group after NaOCl and PDT conditioning whereas, rGO-5% showed higher values after ECYL conditioning. EA-rGO-0% presented greater DC than rGO-5% adhesive. The rGO-5% adhesive demonstrated comparable push-out bond strength and rheological properties to the controls. The rGO-5% demonstrated acceptable DC (although lower than control group), appropriate dentin interaction, and resin tag establishment.

scholarly journals Influence of aging methods on push-out bond strength of adhesive systems to dentin cavities

2017 ◽  
Vol 5 (1) ◽  
Author(s):  
Letícia Virgínia de Freitas Chaves ◽  
Tuany Arantxa de Medeiros ◽  
Boniek Castillo Dutra Borges ◽  
Maria do Carmo Aguiar Jordão Mainardi ◽  
Anderson Catelan ◽  
...  
Keyword(s):  
Bond Strength ◽  
Adhesive Systems ◽  
Push Out

scholarly journals Influence of Zingiber officinale Extract on Push-Out Bond Strength of Glass-Fiber Post

2018 ◽  
Vol 29 (1) ◽  
pp. 93-98 ◽  
Author(s):  
Tânia Mara da Silva ◽  
Virgílio Vilas Boas Fernandes Junior ◽  
Rosemary Soares de Santana ◽  
Renata Marques de Melo Marinho ◽  
Márcia Carneiro Valera ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Zingiber Officinale ◽  
Resin Cement ◽  
Fiber Post ◽  
Ginger Extract ◽  
Etch And Rinse ◽  
Glass Fiber Post ◽  
Push Out

Abstract The aim of this study was to evaluate in vitro the influence of 20% glycolic ginger extract on the bond strength of glass-fiber post cemented with etch-and-rinse or self-etching resin cement. Forty-eight bovine roots were standardized (17±0.5 mm) and randomly divided into two groups, according to irrigant used during biomechanical preparation: NaOCl: 1% sodium hypochlorite and GEN: 20% glycolic ginger extract. Root canal was prepared and randomly assigned to one of two subgroups (n=12), according to luting protocol: self-etching (RelyX U200) and etch-and-rinse (RelyX ARC). After 48 h, the roots were sectioned perpendicularly (4 in cervical third and 3 in middle third) and submitted to push-out bond strength test (50 kgf load cell, 1.0 mm/min). Failure mode was analyzed in SEM and stereomicroscopy. Data were analyzed by three-way ANOVA and Tukey tests (p<0.05). ANOVA revealed that there were no significant differences between U200 (2.01±0.17)B and ARC (1.93±0.12)B in GEN group, and at the cervical third for both irrigants, 2.69±0.16A and 2.54±0.17A, respectively. Middle third showed lower bond strength than cervical third, regardless the irrigant. Overall, the cervical third regardless the irrigant employed and the association between NaOCl and ARC, presented better adhesive performance.

Sign in / Sign up

Export Citation Format

Share Document