Effects of surface energy and surface residual stresses on vibro-thermal analysis of chiral, zigzag, and armchair types of SWCNTs using refined beam theory

2020 ◽  
pp. 1-15 ◽  
Author(s):  
Subrat Kumar Jena ◽  
S. Chakraverty ◽  
Mohammad Malikan ◽  
Francesco Tornabene
Keyword(s):  
Thermal Analysis ◽  
Surface Energy ◽  
Residual Stresses ◽  
Beam Theory ◽  
Surface Residual Stresses ◽  
Refined Beam Theory

scholarly journals Mechanical properties of rotary swaged steel components

2021 ◽  
Author(s):  
Dhia Charni ◽  
Svetlana Ortmann-Ishkina ◽  
Marius Herrmann ◽  
Christian Schenck ◽  
Jérémy Epp
Keyword(s):  
Mechanical Properties ◽  
Residual Stresses ◽  
Strain Curve ◽  
Dynamic Mechanical Properties ◽  
Process Conditions ◽  
Forming Process ◽  
Rotary Swaging ◽  
Surface Residual Stresses ◽  
Near Net Shape ◽  
As Stress

AbstractThe radial infeed rotary swaging is widely used as a diameter reduction forming process of axisymmetric workpieces, improving the mechanical properties with excellent near net shape forming. In the present study, rotary swaging experiments with different parameter setups were performed on steel tubes and bars under different material states and several resulting property modifications were investigated such as stress-strain curve, hardness, fatigue strength and surface residual stresses. The results show a significant work hardening induced by the rotary swaging process and an improvement in the static and dynamic mechanical properties was observed. Furthermore, the hardness distribution was homogenous in the cross section of the rotary swaged workpieces. Moreover, depending on the process conditions, different residual stresses distribution were generated along the surface.

Stress Corrosion Cracking (SCC) of Nickel-Base Weld Metals in PWR Primary Water

2013 ◽  
Vol 747-748 ◽  
pp. 723-732 ◽  
Author(s):  
Ru Xiong ◽  
Ying Jie Qiao ◽  
Gui Liang Liu
Keyword(s):  
Residual Stresses ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Surface Condition ◽  
Cold Work ◽  
Corrosion Cracking ◽  
Pressurized Water ◽  
Weld Metals ◽  
Surface Residual Stresses ◽  
Primary Water

This discussion reviewed the occurrence of stress corrosion cracking (SCC) of alloys 182 and 82 weld metals in primary water (PWSCC) of pressurized water reactors (PWR) from both operating plants and laboratory experiments. Results from in-service experience showed that more than 340 Alloy 182/82 welds have sustained PWSCC. Most of these cases have been attributed to the presence of high residual stresses produced during the manufacture aside from the inherent tendency for Alloy 182/82 to sustain SCC. The affected welds were not subjected to a stress relief heat treatment with adjacent low alloy steel components. Results from laboratory studies indicated that time-to-cracking of Alloy 82 was a factor of 4 to 10 longer than that for Alloy 182. PWSCC depended strongly on the surface condition, surface residual stresses and surface cold work, which were consistent with the results of in-service failures. Improvements in the resistance of advanced weld metals, Alloys 152 and 52, to PWSCC were discussed.

The Compliance Method for Measurement of Near Surface Residual Stresses—Analytical Background

1994 ◽  
Vol 116 (4) ◽  
pp. 550-555 ◽  
Author(s):  
M. Gremaud ◽  
W. Cheng ◽  
I. Finnie ◽  
M. B. Prime
Keyword(s):  
Numerical Simulation ◽  
Residual Stresses ◽  
Random Errors ◽  
Residual Stress Field ◽  
Near Surface ◽  
Surface Residual Stresses ◽  
Zero Shift ◽  
Stress States ◽  
The Stability ◽  
Piecewise Functions

Introducing a thin cut from the surface of a part containing residual stresses produces a change in strain on the surface. When the strains are measured as a function of the depth of the cut, residual stresses near the surface can be estimated using the compliance method. In previous work, the unknown residual stress field was represented by a series of continuous polynomials. The present paper shows that for stress states with steep gradients, superior predictions are obtained by using “overlapping piecewise functions” to represent the stresses. The stability of the method under the influence of random errors and a zero shift is demonstrated by numerical simulation.

Influence of Milling Parameters on Surface Residual Stresses of 7050-T7451 Aluminum Alloy

2012 ◽  
Vol 723 ◽  
pp. 208-213 ◽  
Author(s):  
Yi Wan ◽  
Chen Li ◽  
Zhan Qiang Liu ◽  
Shu Feng Sun
Keyword(s):  
Aluminum Alloy ◽  
Residual Stresses ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Milling Process ◽  
X Ray Diffraction ◽  
Orthogonal Direction ◽  
Mechanical Coupling ◽  
Surface Residual Stresses ◽  
Compressive Residual Stresses

Residual stresses generated in milling process affect the performance of machined components. Milling residual stresses correlate closely with the cutting parameters. In this paper, the generation and distribution of surface residual stresses in milling of aluminum alloy 7050-T7451 was investigated. The cutting speed changes from 300m/min to 3000m/min. In the experiments, the residual stresses on the surface of specimen are detected by X-ray diffraction technique. The result shows that compressive residual stresses are generated when cutting speed is under 500 m/min. In feed and its orthogonal direction, the effect of cutting speed and feed rate on residual stresses is similar. The formation of the residual stresses can be explained by thermo-mechanical coupling effects.

Effect of Cutting-Edge Geometry and Workpiece Hardness on Surface Residual Stresses in Finish Hard Turning of AISI 52100 Steel

1999 ◽  
Author(s):  
Jeffrey D. Thiele ◽  
Shreyes N. Melkote ◽  
Roberta A. Peascoe ◽  
Thomas R. Watkins
Keyword(s):  
Residual Stresses ◽  
Hard Turning ◽  
Cutting Edge ◽  
Phase Changes ◽  
Edge Geometry ◽  
Surface Residual Stresses ◽  
Aisi 52100 ◽  
High Feed ◽  
Aisi 52100 Steel ◽  
Finish Hard Turning

Abstract An experimental investigation was conducted to determine the effects of tool cutting-edge geometry and workpiece hardness on surface residual stresses for finish hard turning of through-hardened AISI 52100 steel. Polycrystalline cubic boron nitride (PCBN) inserts with representative types of edge geometry including “up-sharp” edges, edge hones, and chamfers, were used as the cutting tools in this study. This study shows that tool edge geometry is highly influential with respect to surface residual stresses, which were measured using x-ray diffraction. In general, compressive surface residual stresses in the axial and circumferential directions were generated by large edge hone tools, for longitudinal turning operations. Residual stresses in the axial and circumferential directions generated by small edge hone tools are typically more tensile than stresses produced by large edge hone tools. Microstructural analysis shows that thermal effects are significant at high feed rates, based on the presence of phase changes on the workpiece surface. At high feed rates, compressive stresses correlate with continuous white layers and tensile stresses correlate with over-tempered regions on the surface of the workpiece. Mechanical effects play a larger role at low feed rates, where phase changes are not observed to a significant degree. For these cases, large edge hone tools generally produce more compressive values of residual stress than small edge hone tools.

Sign in / Sign up

Export Citation Format

Share Document