The Morphological and Pulping Indices of Bagasse, Elephant Grass (Leaves and Stalk), and Silk Cotton Fibers for Paper Production

2021 ◽  
pp. 1-9
Author(s):  
Kojo Agyapong Afrifah ◽  
Amanda Naa Amerley Adom ◽  
Samuel Ofosu
TAPPI Journal ◽  
2013 ◽  
Vol 12 (4) ◽  
pp. 19-27
Author(s):  
PATRICK HUBER ◽  
LAURENT LYANNAZ ◽  
BRUNO CARRÉ

The fraction of deinked pulp for coated paper production is continually increasing, with some mills using 100% deinked pulp for the base paper. The brightness of the coated paper made from deinked pulp may be reached through a combination of more or less extensive deinking, compensated by appropriate coating, to optimize costs overall. The authors proposed general optimization methods combined with Kubelka-Munk multilayer calculations to find the most economical combination of deinking and coating process that would produce a coated paper made from DIP, at a given target brightness, while maintaining mechanical properties.


TAPPI Journal ◽  
2014 ◽  
Vol 13 (11) ◽  
pp. 37-43 ◽  
Author(s):  
LIISA KOTANEN ◽  
MIKA KÖRKKÖ ◽  
ARI ÄMMÄLÄ ◽  
JOUKO NIINIMÄKI

The use of recovered paper as a raw material for paper production is by far the most economical and ecological strategy for the disposal of waste paper. However, paper production from recovered paper furnish generates a great amount of residues, and the higher the demand requirements for the end product, the higher the amount of rejected material. The reason for this is that the selectivity of the deinking process is limited; therefore, some valuable components are also lost in reject streams. The rejection of usable components affects the economics of recycled paper production. As the cost of waste disposal continues to increase, this issue is becoming more and more severe. This paper summarizes the current state of the resource efficiency in recycled pulp production and provides information on the volumes of rejected streams and the usable material within them. Various means to use these reject streams are also discussed, including the main findings of a recent thesis by the main author. This review summarizes current internal and external use of reject streams generated in the deinking operations.


2017 ◽  
Vol 4 (2) ◽  
pp. 23-27
Author(s):  
Mergia Abera ◽  
Tekleyohannes Berhanu

Participatory on-farm evaluation of improved forage crops was conducted in six mixed farming system districts of Southern Ethiopia with the objective to identify farmers preferred forage crops (legumes and grasses). Two annual forage legumes (Vigna unguiculata L. (cow pea) and Lablab purpureus (L.), two perennial legumes (Medicago sativa (L.) (alfalfa) and Desmodium intortum (Mill.) Urb. (green-leaf)), and three perennial grasses (Chloris gayana Knuth (Rhodes grass) and two Pennisetum purpureum Schumach (elephant grass) accessions (No.16800 and 16798)) were evaluated in the study. The major farmers’ criteria considered in the evaluation of forage species were vegetative growth, herbage yield, tillering, protection of soil erosion, palatability, perfor- mance under dry weather conditions, performance in marginal area under low input management, multipurpose use (conservation and soil fertility) and fast growing condition. The study showed that elephant grass accession No. 16798, 16800 and Chloris gayana adapted well and farmers preferred them for their higher herbage yield, vegetative growth, tillering ability and drought resistance. Even though the annual forage legumes Lablab purpureus and Vigna unguiculata were superior in their forage yield, the farmers preferred the perennial forage legumes (Desmodium intortum and Medicago sativa) mainly for their performance under dry weather condi- tion due to their longer growth period. Therefore, the consideration of farmers’ preference for forage crops is crucial for increased adoption of improved forage crops in the region.


Author(s):  
Joshua O. Ighalo ◽  
Lois T. Arowoyele ◽  
Samuel Ogunniyi ◽  
Comfort A. Adeyanju ◽  
Folasade M. Oladipo-Emmanuel ◽  
...  

Background: The presence of pollutants in polluted water is not singularized hence pollutant species are constantly in competition for active sites during the adsorption process. A key advantage of competitive adsorption studies is that it informs on the adsorbent performance in real water treatment applications. Objective: This study aims to investigate the competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) using elephant grass (Pennisetum purpureum) biochar and hybrid biochar from LDPE. Method: The produced biochar was characterised by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The effect of adsorption parameters, equilibrium isotherm modelling and parametric studies were conducted based on data from the batch adsorption experiments. Results: For both adsorbents, the removal efficiency was >99% over the domain of the entire investigation for dosage and contact time suggesting that they are very efficient for removing multiple heavy metals from aqueous media. It was observed that removal efficiency was optimal at 2 g/l dosage and contact time of 20 minutes for both adsorbent types. The Elovich isotherm and the pseudo-second order kinetic models were best-fit for the competitive adsorption process. Conclusion: The study was able to successfully reveal that biomass biochar from elephant grass and hybrid biochar from LDPE can be used as effective adsorbent material for the removal of heavy metals from aqueous media. This study bears a positive implication for environmental protection and solid waste management.


2016 ◽  
Vol 832 ◽  
pp. 55-62
Author(s):  
Ján Gaduš ◽  
Tomáš Giertl ◽  
Viera Kažimírová

In the paper experiments and theory of biogas production using industrial waste from paper production as a co-substrate are described. The main aim of the experiments was to evaluate the sensitivity and applicability of the biochemical conversion using the anaerobic digestion of the mixed biomass in the pilot fermentor (5 m3), where the mesophillic temperature was maintained. It was in parallel operation with a large scale fermentor (100 m3). The research was carried out at the biogas plant in Kolíňany, which is a demonstration facility of the Slovak University of Agriculture in Nitra. The experiments proved that the waste arising from the paper production can be used in case of its appropriate dosing as an input substrate for biogas production, and thus it can improve the economic balance of the biogas plant.


2021 ◽  
Vol 53 (1) ◽  
Author(s):  
Jordânia Kely Barbosa da Silva ◽  
Márcio Vieira da Cunha ◽  
Mércia Virgínia Ferreira dos Santos ◽  
André Luiz Rodrigues Magalhães ◽  
Alexandre Carneiro Leão de Mello ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document