Germanium nanoislands grown by radio frequency magnetron sputtering: Annealing time dependent surface morphology and photoluminescence

2013 ◽  
Vol 22 (9) ◽  
pp. 098102 ◽  
Author(s):  
Alireza Samavati ◽  
Z. Othaman ◽  
S. K. Ghoshal ◽  
R. J. Amjad
2015 ◽  
Vol 1105 ◽  
pp. 74-77 ◽  
Author(s):  
Xiao Lin Ji ◽  
Hai Dong Ju ◽  
Tao Yu Zou ◽  
Jin Long Luo ◽  
Kun Quan Hong ◽  
...  

Copper nitride thin films were prepared by reactive radio frequency magnetron sputtering at different sputtering pressures with fixed nitrogen to argon ratio. The influences of sputtering pressure on the structure, optical band gap, and surface morphology of films were investigated. The results show that the preferential orientation of polycrystalline Cu3N thin films changes from [111] to [100] when the sputtering pressure increases. Meanwhile, the optical band gap (Eg) of Cu3N thin films increases with the sputtering pressure. The surface morphology of Cu3N thin film deposited at high sputtering pressure becomes smoother than that of Cu3N thin film deposited at low sputtering pressure.


2012 ◽  
Vol 487 ◽  
pp. 697-700
Author(s):  
Bo Cao ◽  
Tong Rui Yang ◽  
Gong Ping Li

The Cu thin films were prepared at room temperature by radio frequency magnetron sputtering on p-type Si (111) substrates. The surface morphology and interface reaction of Cu thin films were studied at different deposition condition by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results show that the existence of the native silicon oxide layer suppresses the interdiffusion and interface reaction of Cu and Si. The formation of the copper-silicide phase is observed by XRD when the annealing temperature arrives at 450 °C.


2015 ◽  
Vol 2015 ◽  
pp. 1-20 ◽  
Author(s):  
Alireza Samavati ◽  
M. K. Mustafa ◽  
Z. Othaman ◽  
S. K. Ghoshal

The comprehensive investigation of the effect of growth parameters on structural and optical properties of Si-based single layer Ge nanoislands grown via Stranski-Krastanov mechanism employing radio frequency magnetron sputtering due to its high deposition rate, easy procedure, economical cost, and safety is carried out. The estimated width and height of Ge nanoislands produced by this technique are in the range of ∼8 to ∼30 and ∼2 to 8 nm, respectively. Varieties parameters are manipulated to optimize the surface morphology and structural and optical behavior of Ge nanoislands. The resulted nanoislands are analyzed using various analytical techniques including atomic force microscope, X-ray diffraction, energy dispersive X-ray spectroscopy, room temperature photoluminescence, and Raman spectroscopy. The optimum parameters for growing high quality samples having high number density and homogenous and small size distribution are found to be 400°C for substrate temperature, 300 sec for deposition time, 10 sccm for Ar flow, and 100 W for radio frequency power. The excellent features of the results suggest that our systematic investigation on the organized growth factors and their effects on surface parameters and photoluminescence emission energy may constitute a basis for the tunable growth of Ge nanoislands (100) nanoislands suitable in nanophotonics.


Sign in / Sign up

Export Citation Format

Share Document