scholarly journals Residential rooftop PV power generation to support cooling loads and national targets in Saudi Arabia

2021 ◽  
Vol 2042 (1) ◽  
pp. 012097
Author(s):  
M Alam ◽  
A S Alghamdi ◽  
A S Bahaj ◽  
P A B James ◽  
L S Blunden
Keyword(s):  
Saudi Arabia ◽  
Air Conditioning ◽  
Fossil Fuels ◽  
Electricity Consumption ◽  
Policy Framework ◽  
Load Variations ◽  
Pv Systems ◽  
Residential Electricity ◽  
Electrical Demand ◽  
Cooling Loads

Abstract Saudi Arabia (SA) has a high per capita electricity consumption, predominantly supplied from fossil fuels. The residential sector accounts for about 50% of total electricity consumption with approximately 70% of which is used for air-conditioning (AC) loads. This research investigates the role of rooftop photovoltaic (PV) systems to displace cooling loads, hence reducing residential electricity demand. Daily and annual electrical demands were monitored in a villa in Jeddah, and a range of PV systems were modelled to determine their ability to support AC and other household loads. Seasonal performance data of such systems were compared to monitored load variations to understand variability and yields. The monitored electrical demand of the villa was in the range 66-167 kWh/day which was used to estimate the required PV systems’ capacities. The results indicate that PV systems in the range 2-10 kWp present significant shortfall to support the full demand. However, a 15kWp system was found to meet the daytime total loads. These results indicate that appropriately sized rooftop PV-systems can shave-off peak air-conditioning loads. The paper discusses the importance of utilising building integrated PV in such applications in SA, and highlights the need for dissemination at scale through country wide policy framework.

The role of demand response in residential electricity load reduction using appliance shifting techniques

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Timothy King Avordeh ◽  
Samuel Gyamfi ◽  
Alex Akwasi Opoku
Keyword(s):  
Demand Response ◽  
Air Conditioning ◽  
Electricity Consumption ◽  
Response Strategy ◽  
Load Reduction ◽  
Residential Homes ◽  
Load Shifting ◽  
Content Type ◽  
Peak Loads ◽  
Residential Electricity

Purpose Some of the major concerns since the implementation of smart meters (prepaid meters) in some parts of Ghana is how electricity consumers have benefited from data obtained from these meters by providing important statistics on electricity-saving advice; this is one of the key demand-side management methods for achieving load reduction in residential homes. Appliance shifting techniques have proved to be an effective demand response strategy in load reduction. The purpose of this paper is therefore to help consumers of electricity understand when and how they can shift some appliances from peak to off-peak and vice versa. Design/methodology/approach The research uses an analysis technique of Richardson et al. (2010). In their survey on time-of-use surveys to determine the usage of electricity in households as far as appliance shifting was concerned, this study allowed for the assessment of how the occupants’ daily activities in households affect residential electricity consumption. Fell et al. (2014) modeled an aggregate of electricity demand using different appliances (n) in the household. The data for the peak time used in this study were identified from 05:00 to 08:00 and 17:00 to 21:00 for testing the load shifting algorithms, and the off-peak times were pecked from 10:00 to 16:00 and 23:00. This study technique used load management considering real-time scheduling for peak levels in the selected homes. The household devices are modeled in terms of controlled parameters. Using this study’s time-triggered loads on refrigerators and air conditioning systems, the findings suggested that peak loads can be reduced to 45% as a means of maintaining the simultaneous quality of service. To minimize peak loads to around 35% or more, Chaiwongsa and Wongwises (2020) have indicated that room air conditioning and refrigerator loads are simpler to move compared to other household appliances such as cooking appliances. Yet in conclusion, this study made a strong case that a decrease in household peak demand for electricity is primarily contingent on improvements in human behavior. Findings This study has shown that appliance load shifting is a very good way of reducing electrical consumption in residential homes. The comparative performance shows a moderate reduction of 1% in load as was found in the work done by Laicaine (2014). The results, however, indicate that load shifting to a large extent can be achieved by consumer behavioral change. The main response to this study is to advise policymakers in Ghana to develop the appropriate demand response and consumer education towards the general reduction in electrical load in domestic households. The difficulty, however, is how to get the attention of consumer’s on how to start using appliances with less load at peak and also shift some appliances from off-peak times. By increasing consumer knowledge and participation in demand response, it is possible to achieve more efficiency and flexibility in load reduction. The findings were benchmarked with existing comparison studies but may benefit from the potential production of structured references. However, the findings show that load shifting can only be done by modifying consumer actions. Research limitations/implications It should be remembered that this study showed that the use of appliances shifting in residential homes results in load reduction benefits for customers, expressed as savings in electricity prices. The next step will be to build on this cost/benefit study to explain and measure how these reductions transform into net consumer gains for all Ghanaian households. Practical/implications Load shifting will include load controllers in the future, which would automatically handle electricity consumption from various appliances in the home. Based on the device and user needs, the controllers can prioritize loads and appliance usage. The algorithms that underpin automatic load controllers will include knowledge about the behaviors of groups of end users. The results on the time dependency of activities may theoretically inform the algorithms of automatic demand controllers. Originality/value This paper addresses an important need for the country in the midst of finding solutions to an unending energy crisis. This paper presents demand response to the Ghanaian electricity consumer as a means to help in the reduction of load in residential homes. This is a novel research as no one has at yet carried out any research in this direction in Ghana. This paper has some new information to offer in the field of demand in household electricity consumption.

scholarly journals Reducing High Energy Demand Associated with Air-Conditioning Needs in Saudi Arabia

Energies ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 87 ◽  
Author(s):  
Jubran Alshahrani ◽  
Peter Boait
Keyword(s):  
Saudi Arabia ◽  
Energy Consumption ◽  
Energy Demand ◽  
Air Conditioning ◽  
Residential Buildings ◽  
Electricity Consumption ◽  
High Energy ◽  
Residential Sector ◽  
Smart Control ◽  
Ac Systems

Electricity consumption in the Kingdom of Saudi Arabia (KSA) has grown at an annual rate of about 7% as a result of population and economic growth. The consumption of the residential sector accounts for over 50% of the total energy generation. Moreover, the energy consumption of air-conditioning (AC) systems has become 70% of residential buildings’ total electricity consumption in the summer months, leading to a high peak electricity demand. This study investigates solutions that will tackle the problem of high energy demand associated with KSA’s air-conditioning needs in residential buildings. To reduce the AC energy consumption in the residential sector, we propose the use of smart control in the thermostat settings. Smart control can be utilized by (i) scheduling and advance control of the operation of AC systems and (ii) remotely setting the thermostats appropriately by the utilities. In this study, we model typical residential buildings and, crucially, occupancy behavior based on behavioral data obtained through a survey. The potential impacts in terms of achievable electricity savings of different AC operation modes for residential houses of Riyadh city are presented. The results from our computer simulations show that the solutions intended to reduce energy consumption effectively, particularly in the advance mode of operation, resulted in a 30% to 40% increase in total annual energy savings.

scholarly journals Potential for Rooftop-Mounted PV Power Generation to Meet Domestic Electrical Demand in Saudi Arabia: Case Study of a Villa in Jeddah

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4411 ◽  
Author(s):  
Abdulsalam S. Alghamdi
Keyword(s):  
Power Generation ◽  
Saudi Arabia ◽  
Solar Radiation ◽  
Wind Energy ◽  
Large Scale ◽  
National Level ◽  
Energy Resource ◽  
Electricity Consumption ◽  
The Government ◽  
Electrical Demand

The Kingdom of Saudi Arabia (KSA) has a large solar and wind energy resource. Through its Vision 2030 to exploit such resources, KSA is planning to install 9.5 GW of renewable energy power generation systems by 2030, through a mix of solar and wind energy. The government is planning to invest 109 billion US$ over the next 20 years for solar energy. The focus will be on solar photovoltaic (PV) and concentrated solar technologies at a national level. So far, the electricity demand in KSA is almost entirely dependent on fossil fuels for generating power. This paper addresses the potential to utilize the solar radiation resource at a different scale and reduce the power demand from the grid, bringing collateral benefits for householders and the government alike. The work presents the results from monitoring the electricity consumption of two typical domestic buildings (villas) in Jeddah, KSA. The electricity consumption observations were associated with indoor environmental conditions to study how and when cooling demand affects final demand. The study investigated options to serve the observed demand profile of the villas with simulated power generation from arrays of PV panels installed on two buildings’ roofs. Finally, a model of dynamic solar radiation simulation was developed to assess the hourly electricity generation, and a cost-benefit analysis was conducted for different capacity PV systems scenarios. The results indicate that locally used rooftop PV output could reduce the household electrical demand from the grid by around 80% at the housing level and in combination with building refurbishment solutions, could result in additional energy savings. The economic analysis discusses the implications of a proposed feed-in tariff with the associated payback periods and ROI, as well as proposals for PV system deployment at a large scale on the roof of buildings in KSA.

The Feasibility Study of Household Units PV Cells for Carbon Emission Reduction in Developing Countries: A Case Study of N. Cyprus

2010 ◽  
Author(s):  
O. Phillips Agboola ◽  
Faut Egelioglu ◽  
O. Mary Agboola
Keyword(s):  
Developing Countries ◽  
Fossil Fuels ◽  
Photovoltaic Cells ◽  
Electricity Consumption ◽  
Weather Conditions ◽  
Heat Pumps ◽  
Fuel Oil ◽  
Local Market ◽  
Environmental Friendliness ◽  
Pv Systems

In this paper the feasibility of using photovoltaic cells to reduce electricity generation from fossil fuels in North Cyprus (N. Cyprus) was studied. In this work it is proposed to use photovoltaic systems to power heating and cooling systems (i.e., mainly heat pumps) in household units and it was found that this is economically feasible. It was also discovered that despite the extensive use of solar water heaters in N. Cyprus, the awareness of photovoltaic cells is still very low and few house owners take advantage of its economic and environmental friendliness. It was also observed that PV cells are not widely available in the local market; coupled with the fact that formal awareness of energy friendly electricity means is not well promoted in developing countries. The result of this work shows that about 40% of yearly electricity consumption in N. Cyprus, which is mainly generated from plants using fuel oil no. 6, can be reduced if all household units use PV systems to heat or cool the house depending on the weather conditions. According to the electricity forecast carried out in this paper it was observed that the annual net electricity consumption is expected to increase by 30.65% in the year 2015. This means that the utility company will need to augment its current facilities to accommodate the increment; by expanding its facilities or opting for energy conservation policies. The latter has proved to be inefficient in this part of the world; the former will increase the use of fossil fuel thereby increasing the CO2 emission. This work also provides economic analysis for PV systems investment for household owners and policies to help increase availability of PV cells in N. Cyprus market.

scholarly journals Staying Cool in A Warming Climate: Temperature, Electricity and Air Conditioning in Saudi Arabia

Climate ◽  
2020 ◽  
Vol 8 (1) ◽  
pp. 4 ◽  
Author(s):  
Nicholas Howarth ◽  
Natalia Odnoletkova ◽  
Thamir Alshehri ◽  
Abdullah Almadani ◽  
Alessandro Lanza ◽  
...  
Keyword(s):  
Saudi Arabia ◽  
Co2 Emissions ◽  
Air Conditioning ◽  
Sustainable Use ◽  
Electricity Consumption ◽  
Annual Data ◽  
Efficiency Measures ◽  
Hourly Data ◽  
Carbon Dioxide Co2 ◽  
The Relationship

As global temperatures warm and populations and incomes rise, the demand for cooling will soar, creating a positive feedback loop between global warming and electricity-related carbon dioxide (CO2) emissions. This study explores the relationship between temperature, electricity, air conditioning (AC) and CO2 emissions, and the sustainability of cooling in the Kingdom of Saudi Arabia. With the highest share of AC in household electricity consumption in the world and its already very hot summers warming by 3 °C in many areas over the last 40 years, Saudi Arabia provides an important case study of how the cooling challenge can be managed. Data from the European Centre for Medium-Range Weather Forecasts (ECMWF ERA5) is used to illustrate local warming trends (1979–2018) and show the relationship between temperature and power generation within a typical year using hourly data (2011–2015). Using annual data (2010–2018), we then show that since 2016 the rapid growth in the Kingdom’s electricity demand for AC and its associated CO2 emissions have plateaued. This suggests energy efficiency measures, higher electricity prices and a shift from the use of oil towards gas in the power sector are having a positive effect on energy sustainability. We identify key policies and technologies that will be important for the sustainable use of cooling in Saudi Arabia and beyond.

scholarly journals Exergy and Economic Analysis of Energy Consumption in the Residential Sector of the Qassim Region in the Kingdom of Saudi Arabia

2020 ◽  
Vol 12 (7) ◽  
pp. 2606 ◽  
Author(s):  
Radwan A. Almasri ◽  
A. F. Almarshoud ◽  
Hanafy M. Omar ◽  
Khaled Khodary Esmaeil ◽  
Mohammed Alshitawi
Keyword(s):  
Saudi Arabia ◽  
Energy Consumption ◽  
Electric Energy ◽  
Electricity Consumption ◽  
Kingdom Of Saudi Arabia ◽  
Residential Sector ◽  
Water Heaters ◽  
Efficiency Measures ◽  
Residential Electricity ◽  
Residential Electricity Consumption

The Kingdom of Saudi Arabia (KSA) is considered one of the countries with the highest consumption of electric energy per capita. Moreover, during the period of 2007–2017, the consumption rate increased from 6.9 MWh to 9.6 MWh. On the other hand, the share of residential electricity consumption in the KSA constitutes the biggest portion of the total electric consumption, which was about 48% in 2017. The objectives of this work were to analyze the exergy and assess the economic and environmental impacts of energy consumption in the residential sector of the Qassim region to determine potential areas for energy rationalization. The consumption patterns of 100 surveyed dwellings were analyzed to establish energy consumption indicators and conduct exergy analysis. The performances of different consuming domestic items were also examined, and energy efficiency measures are proposed. The average yearly consumption per dwelling was determined, and the total energy and exergy efficiencies are 145% and 11.38%, respectively. The average shares of lighting, domestic appliances, water heaters, and air conditioning from the total yearly energy consumption were determined.

A tes

2018 ◽  
Vol 1 (3) ◽  
Author(s):  
IJE Manager
Keyword(s):  
Energy Supply ◽  
Fossil Fuels ◽  
Geographical Location ◽  
Weather Conditions ◽  
Past Century ◽  
Solar Pv ◽  
Pv Systems ◽  
Trade Offs ◽  
A Site ◽  
Selection Methodology

In the past century, fossil fuels have dominated energy supply in Indonesia. However, concerns over emissions are likely to change the future energy supply. As people become more conscious of environmental issues, alternatives for energy are sought to reduce the environmental impacts. These include renewable energy (RE) sources such as solar photovoltaic (PV) systems. However, most RE sources like solar PV are not available continuously since they depend on weather conditions, in addition to geographical location. Bali has a stable and long sunny day with 12 hours of daylight throughout the year and an average insolation of 5.3 kWh/m2 per day. This study looks at the potential for on-grid solar PV to decarbonize energy in Bali. A site selection methodology using GIS is applied to measure solar PV potential. Firstly, the study investigates the boundaries related to environmental acceptability and economic objectives for land use in Bali. Secondly, the potential of solar energy is estimated by defining the suitable areas, given the technical assumptions of solar PV. Finally, the study extends the analysis to calculate the reduction in emissions when the calculated potential is installed. Some technical factors, such as tilting solar, and intermittency throughout the day, are outside the scope of this study. Based on this model, Bali has an annual electricity potential for 32-53 TWh from solar PV using amorphous thin-film silicon as the cheapest option. This potential amount to three times the electricity supply for the island in 2024 which is estimated at 10 TWh. Bali has an excessive potential to support its own electricity demand with renewables, however, some limitations exist with some trade-offs to realize the idea. These results aim to build a developmental vision of solar PV systems in Bali based on available land and the region’s irradiation.

scholarly journals A Comparative Assessment for the Potential Energy Production from PV Installation on Residential Buildings

2020 ◽  
Vol 12 (24) ◽  
pp. 10344
Author(s):  
Sameh Monna ◽  
Adel Juaidi ◽  
Ramez Abdallah ◽  
Mohammed Itma
Keyword(s):  
Potential Energy ◽  
Energy Production ◽  
Residential Buildings ◽  
Electricity Consumption ◽  
Residential Building ◽  
Electricity Production ◽  
Energy Sustainability ◽  
Pv Systems ◽  
Residential Units ◽  
Future Consumption

This paper targets the future energy sustainability and aims to estimate the potential energy production from installing photovoltaic (PV) systems on the rooftop of apartment’s residential buildings, which represent the largest building sector. Analysis of the residential building typologies was carried out to select the most used residential building types in terms of building roof area, number of floors, and the number of apartments on each floor. A computer simulation tool has been used to calculate the electricity production for each building type, for three different tilt angles to estimate the electricity production. Tilt angle, spacing between the arrays, the building shape, shading from PV arrays, and other roof elements were analyzed for optimum and maximum electricity production. The electricity production for each household has been compared to typical household electricity consumption and its future consumption in 2030. The results show that installing PV systems on residential buildings can speed the transition to renewable energy and energy sustainability. The electricity production for building types with 2–4 residential units can surplus their estimated future consumption. Building types with 4–8 residential units can produce their electricity consumption in 2030. Building types of 12–24 residential units can produce more than half of their 2030 future consumption.

Sign in / Sign up

Export Citation Format

Share Document