scholarly journals Mechanical Properties of Thermoplastic Starch Biocomposite Films with Hybrid Fillers

2021 ◽  
Vol 2080 (1) ◽  
pp. 012011
Author(s):  
Di Sheng Lai ◽  
Sinar Arzuria Adnan ◽  
Azlin Fazlina Osman ◽  
Ismail Ibrahim ◽  
Hazrul Haq
Keyword(s):  
Mechanical Properties ◽  
Food Packaging ◽  
Corn Starch ◽  
Composite Films ◽  
Thermoplastic Starch ◽  
Elongation At Break ◽  
Biocomposite Films ◽  
Hybrid Fillers ◽  
The Matrix ◽  
Dry Food

Abstract Thermoplastic starch (TPS) was studied extensively to replace conventional plastic in packaging application. In this study, granule corn starch was first plasticized with water and glycerol to form TPS films and two different fillers were incorporated with TPS to form hybrid biocomposite films (TPSB). Two different fillers: Microcrystalline cellulose (MC) and Nano bentonite (NB) fixed at 1: 4 ratios in various loading (1wt%-6wt%) were incorporated in TPS to study effect of hybrid fillers on the mechanical properties of TPSB films. The effect of different loading of MC/NB on TPSB films was investigated through the structural, morphological and mechanical testing. Fourier Transform Infrared Spectroscopy (FTIR) shows TPS matrix and hybrid fillers are highly compatible due to hydroxyl bonding and verified through the shifting of spectra band. Scanning Electron Microscope (SEM) showed even distribution of fillers in the matrix of TPS. The TPSB films exhibited significant improvement 40% in elongation at break compared to pure TPS films. In this study, 5wt% is best loading of the hybrid fillers to incorporated in TPSB films as it achieved the highest value of tensile strength (8.52MPa), Young’s Modulus (42.0 MPa) and elongation at break (116.3%). Generally, previous studies showed flexibility of TPS composite films reduced with incorporating filler, however in this study, the flexibility TPSB show significant improvement compared to previous studies and exhibit promising potential in dry food packaging application.

Effect of Co60γ Ray Irradiation on Thermoplastic Corn Starch Plastic

2013 ◽  
Vol 772 ◽  
pp. 34-37
Author(s):  
Hao Tang ◽  
Hai Tian Jiang ◽  
Bin Guo ◽  
Pan Xin Li
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Corn Starch ◽  
Irradiation Time ◽  
Thermoplastic Starch ◽  
Endothermic Peak ◽  
Macromolecular Structure ◽  
Thermal And Mechanical Properties ◽  
Elongation At Break ◽  
Γ Ray

Corn starch was irradiated by 60Coγ ray, and then the thermoplastic starch plastic (TPS) was prepared by adding glycerol. Microstructure, thermal and mechanical properties of the corn starch and starch plastic were studied in details by FTIR, DSC and SEM. Results showed that the starch macromolecular structure was damaged by irradiation, and with increased irradiation time, the temperature of melt endothermic peak and tensile strength decreased, elongation at break increases for starch plastic, the thermoplastic property of starch was enhanced obviously.

scholarly journals Flexible Thermoplastic Starch Films Functionalized With Copper Particles for Packaging of Food Products

2020 ◽  
Author(s):  
Olivia López ◽  
María E. Villanueva ◽  
Guillermo J. Copello ◽  
Marcelo A Villar
Keyword(s):  
Inhibitory Concentration ◽  
Corn Starch ◽  
Composite Films ◽  
Thermoplastic Starch ◽  
Biodegradable Films ◽  
Melt Mixing ◽  
Elongation At Break ◽  
Copper Particles ◽  
Starch Films ◽  
Fresh Products

Abstract Biodegradable films based on thermoplastic corn starch (TPS) and copper particles with antimicrobial capacity were developed. Copper nanoparticles (Cu) and silica coated copper microparticles (Si-Cu) in the range of 0.25 to 5 % were used. Composite films were obtained by melt-mixing and subsequent thermo-compression. Particles distribution within TPS matrix and the presence of some pores and cracks, induced by Si-Cu particles, was evaluated by SEM. The presence of both fillers gave to composite films a brown pigmentation and decreased their transparency; these effects were more pronounced at higher particles concentrations. Regarding mechanical properties, copper particles at 1 and 5 % acted as reinforcing agents increasing the maximum tensile strength but their presence lead to a decrease in elongation at break, affecting films ductility. Composites inhibited the growth of Gram+ and Gram- bacteria, demonstrating their antimicrobial capacity. Copper effectively migrated to a simulant of aqueous foods and naked particles concentration in the simulant medium resulted higher than the minimum inhibitory concentration for bacteria. The characteristics and properties of developed composite films make them an interesting material for food primary packaging, mainly for meat fresh products.

scholarly journals Flexible Thermoplastic Starch Films Functionalized With Copper Particles for Packaging of Food Products

2020 ◽  
Author(s):  
Olivia López ◽  
María E. Villanueva ◽  
Guillermo J. Copello ◽  
Marcelo A Villar
Keyword(s):  
Inhibitory Concentration ◽  
Corn Starch ◽  
Composite Films ◽  
Thermoplastic Starch ◽  
Biodegradable Films ◽  
Melt Mixing ◽  
Elongation At Break ◽  
Copper Particles ◽  
Starch Films ◽  
Fresh Products

Abstract Biodegradable films based on thermoplastic corn starch (TPS) and copper particles with antimicrobial capacity were developed. Copper nanoparticles (Cu) and silica coated copper microparticles (Si-Cu) in the range of 0.25 to 5 % were used. Composite films were obtained by melt-mixing and subsequent thermo-compression. Particles distribution within TPS matrix and the presence of some pores and cracks, induced by Si-Cu particles, was evaluated by SEM. The presence of both fillers gave to composite films a brown pigmentation and decreased their transparency; these effects were more pronounced at higher particles concentrations. Regarding mechanical properties, copper particles at 1 and 5 % acted as reinforcing agents increasing the maximum tensile strength but their presence lead to a decrease in elongation at break, affecting films ductility. Composites inhibited the growth of Gram+ and Gram- bacteria, demonstrating their antimicrobial capacity. Copper effectively migrated to a simulant of aqueous foods and naked particles concentration in the simulant medium resulted higher than the minimum inhibitory concentration for bacteria.The characteristics and properties of developed composite films make them an interesting material for food primary packaging, mainly for meat fresh products.

scholarly journals Flexible Thermoplastic Starch Films Functionalized With Copper Particles for Packaging of Food Products

2020 ◽  
Author(s):  
Olivia López ◽  
María E. Villanueva ◽  
Guillermo J. Copello ◽  
Marcelo A Villar
Keyword(s):  
Inhibitory Concentration ◽  
Corn Starch ◽  
Composite Films ◽  
Thermoplastic Starch ◽  
Biodegradable Films ◽  
Melt Mixing ◽  
Elongation At Break ◽  
Copper Particles ◽  
Starch Films ◽  
Fresh Products

Abstract Biodegradable films based on thermoplastic corn starch (TPS) and copper particles with antimicrobial capacity were developed. Copper nanoparticles (Cu) and silica coated copper microparticles (Si-Cu) in the range of 0.25 to 5 % were used. Composite films were obtained by melt-mixing and subsequent thermo-compression. Particles distribution within TPS matrix and the presence of some pores and cracks, induced by Si-Cu particles, was evaluated by SEM. The presence of both fillers gave composite films a brown pigmentation and decreased their transparency; these effects were more pronounced at higher particles concentrations. Regarding mechanical properties, copper particles at 1 and 5 % acted as reinforcing agents increasing the maximum tensile strength but their presence lead to a decrease in elongation at break, affecting films ductility. Composites inhibited the growth of Gram+ and Gram- bacteria, demonstrating their antimicrobial capacity. Copper effectively migrated to a simulant of aqueous foods and naked particles concentration in the simulant medium resulted higher than the minimum inhibitory concentration for bacteria. The characteristics and properties of developed composite films make them an interesting material for food primary packaging, mainly for meat fresh products.

Nanoarchitectonics Composites of Thermoplastic Starch and Montmorillonite Modified with Low Molecular Weight Polylactic Acid

2020 ◽  
Vol 20 (5) ◽  
pp. 2955-2963
Author(s):  
Peixian Li ◽  
Huimin Guo ◽  
Kaixiong Yang ◽  
Xiaoyan Yu ◽  
Xiongwei Qu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Tensile Strength ◽  
Polylactic Acid ◽  
Composite Films ◽  
Thermoplastic Starch ◽  
Nanocomposite Films ◽  
Low Molecular Weight ◽  
Elongation At Break ◽  
Starch Films

Nano montmorillonite (MMT) was modified by low molecular weight polylactic acid (PLA), then, the PLA modified MMT and raw MMT were added into thermoplastic starch (TPS) to prepare biodegradable nanocomposite films, respectively. For both nanocomposite films with raw MMT and modified MMT, the Tmax of degradation was enhanced and the mechanical properties were improved. The composite films containing 4 wt.% MMT displayed tensile strength of 5.06 MPa, approximately 1.4 times of that for the pure TPS films. The tensile strength of composite films containing 4 wt.% modified MMT is 6.74 MPa approximately 2 times of those for pure starch films. On the other hand, the composite film containing 4 wt.% modified MMT displayed elongation at break as high as 34.25%, which is 1.3 times of that of the pure starch film, while the composite films containing raw MMT had reduced elongation at break. This study showed that the MMT modified with PLA could significantly enhance the mechanical properties of TPS, and provides a new method to prepare fully biodegradable starch-based nanocomposites.

scholarly journals Effect of Organic Modifier Types on the Physical–Mechanical Properties and Overall Migration of Post-Consumer Polypropylene/Clay Nanocomposites for Food Packaging

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1502
Author(s):  
Eliezer Velásquez ◽  
Sebastián Espinoza ◽  
Ximena Valenzuela ◽  
Luan Garrido ◽  
María José Galotto ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Food Packaging ◽  
Clay Nanocomposites ◽  
Organic Modifier ◽  
Thermal And Mechanical Properties ◽  
Chemical Safety ◽  
Elongation At Break ◽  
Fatty Food ◽  
Recycled Plastics ◽  
Thermal Stability Of

The deterioration of the physical–mechanical properties and loss of the chemical safety of plastics after consumption are topics of concern for food packaging applications. Incorporating nanoclays is an alternative to improve the performance of recycled plastics. However, properties and overall migration from polymer/clay nanocomposites to food require to be evaluated case-by-case. This work aimed to investigate the effect of organic modifier types of clays on the structural, thermal and mechanical properties and the overall migration of nanocomposites based on 50/50 virgin and recycled post-consumer polypropylene blend (VPP/RPP) and organoclays for food packaging applications. The clay with the most hydrophobic organic modifier caused higher thermal stability of the nanocomposites and greater intercalation of polypropylene between clay mineral layers but increased the overall migration to a fatty food simulant. This migration value was higher from the 50/50 VPP/RPP film than from VPP. Nonetheless, clays reduced the migration and even more when the clay had greater hydrophilicity because of lower interactions between the nanocomposite and the fatty simulant. Conversely, nanocomposites and VPP/RPP control films exhibited low migration values in the acid and non-acid food simulants. Regarding tensile parameters, elongation at break values of PP film significantly increased with RPP addition, but the incorporation of organoclays reduced its ductility to values closer to the VPP.

Enhanced thermal conductivity of polyimide composite film filled with hybrid fillers

2021 ◽  
pp. 095400832110003
Author(s):  
Ruiyi Li ◽  
Chengcheng Ding ◽  
Juan Yu ◽  
Xiaodong Wang ◽  
Pei Huang
Keyword(s):  
Thermal Conductivity ◽  
Composite Film ◽  
Hexagonal Boron Nitride ◽  
Composite Films ◽  
Resistance Index ◽  
Reference Value ◽  
Residual Rate ◽  
Practical Applications ◽  
Hybrid Fillers ◽  
The Matrix

In this article, the polyimide (PI) composite films with synergistically improving thermal conductivity were prepared by adding a few graphene nanoplatelets (GNP) and various hexagonal boron nitride (h-BN) contents into the PI matrix. The thermal conductivity of PI composite film with 1 wt% GNP and 30 wt% h-BN content was 1.21 W(m·k)− 1, which was higher than that of the PI composite film with 30 wt% h-BN content (0.45 W(m·k)− 1), the synergistic efficiency of GNP under various h-BN content (10 wt%, 20 wt%, and 30 wt%) were 1.70, 2.71, and 3.09, respectively. And it was found that the increased h-BN content can suppress the dielectric properties caused by GNP in the matrix. The dielectric permittivity and dielectric loss tangent of 1 wt% GNP/PI composite film were 10.69, 0.661 at 103 Hz, respectively, and that of the 30 wt% h-BN + GNP/PI composite film were 4.29 and 0.1367, respectively. Moreover, the mechanical properties of the PI composite film were suitable for practical applications. And the heat resistance index and the residual rate at 700°C of PI composite film increased to 326.8°C, 74.43%, respectively, and these of PI film were 292.6°C and 59.26%. Thus, it may provide a reference value for applying the filler hybridization/PI film in the electronic packaging materials.

scholarly journals Ecofriendly Preparation and Characterization of a Cassava Starch/Polybutylene Adipate Terephthalate Film

Processes ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 329
Author(s):  
Tan Yi ◽  
Minghui Qi ◽  
Qi Mo ◽  
Lijie Huang ◽  
Hanyu Zhao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Contact Angle ◽  
Water Vapor ◽  
Composite Film ◽  
Water Absorption ◽  
Composite Films ◽  
Thermoplastic Starch ◽  
Light Transmittance ◽  
Infrared Spectrometry ◽  
Nano Zno

Composite films of polybutylene adipate terephthalate (PBAT) were prepared by adding thermoplastic starch (TPS) (TPS/PBAT) and nano-zinc oxide (nano-ZnO) (TPS/PBAT/nano-ZnO). The changes of surface morphology, thermal properties, crystal types and functional groups of starch during plasticization were analyzed by scanning electron microscopy, synchronous thermal analysis, X-ray diffraction, infrared spectrometry, mechanical property tests, and contact Angle and transmittance tests. The relationship between the addition of TPS and the tensile strength, transmittance, contact angle, water absorption, and water vapor barrier of the composite film, and the influence of nano-ZnO on the mechanical properties and contact angle of the 10% TPS/PBAT composite film. Experimental results show that, after plasticizing, the crystalline form of starch changed from A-type to V-type, the functional group changed and the lipophilicity increased; the increase of TPS content, the light transmittance and mechanical properties of the composite membrane decreased, while the water vapor transmittance and water absorption increased. The mechanical properties of the composite can be significantly improved by adding nano-ZnO at a lower concentration (optimum content is 1 wt%).

scholarly journals Sericin cocoon bio-compatibilizer for reactive blending of thermoplastic cassava starch

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Thanongsak Chaiyaso ◽  
Pornchai Rachtanapun ◽  
Nanthicha Thajai ◽  
Krittameth Kiattipornpithak ◽  
Pensak Jantrawut ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Maleic Anhydride ◽  
Crystal Size ◽  
Thermoplastic Starch ◽  
Cassava Starch ◽  
Chain Extension ◽  
Amino Groups ◽  
Reactive Blending ◽  
Elongation At Break ◽  
Small Crystal Size

AbstractCassava starch was blended with glycerol to prepare thermoplastic starch (TPS). Thermoplastic starch was premixed with sericin (TPSS) by solution mixing and then melt-blended with polyethylene grafted maleic anhydride (PEMAH). The effect of sericin on the mechanical properties, morphology, thermal properties, rheology, and reaction mechanism was investigated. The tensile strength and elongation at break of the TPSS10/PEMAH blend were improved to 12.2 MPa and 100.4%, respectively. The TPS/PEMAH morphology presented polyethylene grafted maleic anhydride particles (2 μm) dispersed in the thermoplastic starch matrix, which decreased in size to approximately 200 nm when 5% sericin was used. The melting temperature of polyethylene grafted maleic anhydride (121 °C) decreased to 111 °C because of the small crystal size of the polyethylene grafted maleic anhydride phase. The viscosity of TPS/PEMAH increased with increasing sericin content because of the chain extension. Fourier-transform infrared spectroscopy confirmed the reaction between the amino groups of sericin and the maleic anhydride groups of polyethylene grafted maleic anhydride. This reaction reduced the interfacial tension between thermoplastic starch and polyethylene grafted maleic anhydride, which improved the compatibility, mechanical properties, and morphology of the blend.

scholarly journals Monitoring the degradation of partly decomposable plastic foils

2014 ◽  
Vol 6 (1) ◽  
pp. 39-44
Author(s):  
Gabriella Rétháti ◽  
Krisztina Pogácsás ◽  
Tamás Heffner ◽  
Barbara Simon ◽  
Imre Czinkota ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Molecular Mass ◽  
Structural Changes ◽  
Thermoplastic Starch ◽  
Medium Density ◽  
Insulating Layer ◽  
Elongation At Break ◽  
One Year ◽  
The One

Abstract We have monitored the behaviour of different polyethylene foils including virgin medium density polyethylene (MDPE), MDPE containing pro-oxydative additives (238, 242) and MDPE with pro-oxydative additives and thermoplastic starch (297) in the soil for a period of one year. A foil based on a blend of polyester and polylactic acid (BASF Ecovio) served as degradable control. The experiment was carried out by weekly measurements of conductivity and capacity of the soil, since the setup was analogous to a condenser, of which the insulating layer was the foil itself. The twelve replications allowed monthly sampling; the specimen taken out from the soil each month were tested visually for thickness, mechanical properties, morphological and structural changes, and molecular mass. Based on the obtained capacity values, we found that among the polyethylene foils, the one that contained thermoplastic starch extenuated the most. This foil had the greatest decrease in tensile strength and elongation at break due to the presence of thermoplastic starch. The starch can completely degrade in the soil; thus, the foil had cracks and pores. The polyethylene foils that contained pro-oxydant additives showed smaller external change compared to the virgin foil, since there was no available UV radiation and oxygen for their degradation. The smallest change occurred in the virgin polyethylene foil. Among the five examined samples, the commercially available BASF foil showed the largest extenuation and external change, and it deteriorated the most in the soil.

Sign in / Sign up

Export Citation Format

Share Document