scholarly journals Primary energy saving potential of a solar-driven ejector cooling system: a case study for a Portuguese residential building

2021 ◽  
Vol 2116 (1) ◽  
pp. 012117
Author(s):  
M Dongellini ◽  
C Naldi ◽  
C Moser ◽  
S Varga ◽  
G L Morini
Keyword(s):  
Cooling System ◽  
Operation Time ◽  
Residential Building ◽  
Energy Performance ◽  
Primary Energy ◽  
Operating Conditions ◽  
Ambient Conditions ◽  
Control Logic ◽  
Biomass Boiler ◽  
Conventional Solution

Abstract The seasonal energy performance of a cooling system based on an innovative variable-geometry ejector (VGE) is numerically investigated by using TRNSYS. The VGE-based system is mainly driven by solar energy, collected through solar thermal collectors, and is coupled to a residential building located in Porto. A biomass boiler is used as back-up heater. The energy performance of the investigated cooling system is compared with that of a conventional solution, based on a commercial air-to-water chiller. Results point out that, almost 75% of the generator heat demand can be supplied by solar collectors and about 90% of the overall energy input of the ejector-based system is satisfied by renewables. Moreover, numerical simulations confirm how the capability to vary the ejector geometry on the basis of current operating conditions allows to strongly improve the ejector seasonal efficiency. A second series of simulations aimed to further enhance the system performance. A master control logic which extends the VGE operation time in correspondence of favourable ambient conditions was introduced, in order to store additional cooling energy in the cold buffer tank. This strategy has proved to be effective, since the energy consumption of the biomass boiler could be reduced up to 35%.

Inlet Air Cooling Applied to Combined Cycle Power Plants: Influence of Site Climate and Thermal Storage Systems

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Nicola Palestra ◽  
Giovanna Barigozzi ◽  
Antonio Perdichizzi
Keyword(s):  
Power Output ◽  
Parametric Analysis ◽  
Power Plants ◽  
Cooling System ◽  
Thermal Storage ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Cooling Systems

The paper presents the results of an investigation on inlet air cooling systems based on cool thermal storage, applied to combined cycle power plants. Such systems provide a significant increase of electric energy production in the peak hours; the charge of the cool thermal storage is performed instead during the night time. The inlet air cooling system also allows the plant to reduce power output dependence on ambient conditions. A 127MW combined cycle power plant operating in the Italian scenario is the object of this investigation. Two different technologies for cool thermal storage have been considered: ice harvester and stratified chilled water. To evaluate the performance of the combined cycle under different operating conditions, inlet cooling systems have been simulated with an in-house developed computational code. An economical analysis has been then performed. Different plant location sites have been considered, with the purpose to weigh up the influence of climatic conditions. Finally, a parametric analysis has been carried out in order to investigate how a variation of the thermal storage size affects the combined cycle performances and the investment profitability. It was found that both cool thermal storage technologies considered perform similarly in terms of gross extra production of energy. Despite this, the ice harvester shows higher parasitic load due to chillers consumptions. Warmer climates of the plant site resulted in a greater increase in the amount of operational hours than power output augmentation; investment profitability is different as well. Results of parametric analysis showed how important the size of inlet cooling storage may be for economical results.

scholarly journals Heating and Cooling Performance of Office Buildings with a-Si BIPV Windows Considering Operating Conditions in Temperate Climates: The Case of Korea

2018 ◽  
Vol 10 (12) ◽  
pp. 4856 ◽  
Author(s):  
Hyung An ◽  
Jong Yoon ◽  
Young An ◽  
Eunnyeong Heo
Keyword(s):  
Double Layer ◽  
Operation Time ◽  
Primary Energy ◽  
Operating Conditions ◽  
Cooling Performance ◽  
Air Infiltration ◽  
Heating And Cooling ◽  
Clear Glass ◽  
Cooling Loads ◽  
The Impact

This study analyzed the heating and cooling performance of an office building in Daegu, Korea, equipped with amorphous-Si (a-Si) building-integrated photovoltaic (BIPV) windows. EnergyPlus was used to simulate and compare the heating and cooling loads of models for clear glass double-layer, heat-absorbing glass double-layer, and low-emissivity (low-e) glass double-layer windows. In addition, the impact of changes in building operation time, temperature settings, air infiltration from the entrances, and internal load were also analyzed as these all have a large impact on heating and cooling loads. Finally, three types of heating and cooling equipment were tested, and their power and primary energy consumption analyzed, to determine the actual energy used. Under baseline conditions, there was an 18.2% reduction in heating and cooling loads when the BIPV model was used compared to when the clear glass double-layer window was used. In addition, increases in temperature settings and air infiltration from the entrances had a negative effect on the reduction of the heating and cooling loads demonstrating a need for intensive management of these features if a-Si BIPV windows are installed in a building.

Heavy Duty Gas Turbine Simulation: Global Performances Estimation and Secondary Air System Modifications

2006 ◽  
Author(s):  
Carlo Carcasci ◽  
Bruno Facchini ◽  
Stefano Gori ◽  
Luca Bozzi ◽  
Stefano Traverso
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Cooling System ◽  
Energy System ◽  
Operating Conditions ◽  
Coupled Analysis ◽  
Ambient Conditions ◽  
Air System ◽  
Secondary Air ◽  
And Performance

This paper reviews a modular-structured program ESMS (Energy System Modular Simulation) for the simulation of air-cooled gas turbines cycles, including the calculation of the secondary air system. The program has been tested for the Ansaldo Energia gas turbine V94.3A, which is one of the more advanced models in the family Vx4.3A with a rated power of 270 MW. V94.3A cooling system has been modeled with SASAC (Secondary Air System Ansaldo Code), the Ansaldo code used to predict the structure of the flow through the internal air system. The objective of the work was to investigate the tuning of the analytical program on the basis of the data from design and performance codes in use at Ansaldo Energy Gas Turbine Department. The results, both at base load over different ambient conditions and in critical off-design operating points (full-speed-no-load and minimum-load), have been compared with APC (Ansaldo Performance Code) and confirmed by field data. The coupled analysis of cycle and cooling network shows interesting evaluations for components life estimation and reliability during off-design operating conditions.

scholarly journals Energy Performance Optimization in a Condensing Boiler

2021 ◽  
Vol 9 (1) ◽  
pp. 6
Author(s):  
Diego Fernández-Cheliz ◽  
Eloy Velasco-Gómez ◽  
Juan Peral-Andrés ◽  
Ana Tejero-González
Keyword(s):  
Energy Consumption ◽  
Natural Gas ◽  
Performance Optimization ◽  
Energy Performance ◽  
Primary Energy ◽  
Operating Conditions ◽  
Hot Water ◽  
Operating Parameters ◽  
Climate Conditions ◽  
Lower Heating Value

In Europe, primary energy consumption in buildings accounts for up to 25–40%, depending on the climate conditions. Space heating and Domestic Hot Water (DHW) contribute significantly to this energy consumption. Among the most common sources for heat generation in these appliances is natural gas. Condensing boilers can surpass the 100% energy performance over the lower heating value, if the operating conditions enable the water vapor in the exhaust gases to condensate. Consequently, optimizing the operating parameters of condensing boilers is necessary to decrease fuel consumption without hindering water heating needs. The present work presents an experimental approach to the operating parameters of a condensing boiler that works with natural gas. The aim is to develop a theoretical model that relates the energy performance to the water temperature set by the final user and the excess air set by the maintenance staff.

scholarly journals Experimental Assessment of Energy Performance and Emissions of a Residential Microcogenerator

2014 ◽  
Vol 1 (2) ◽  
pp. 48 ◽  
Author(s):  
Giovanni Angrisani ◽  
Carlo Roselli ◽  
Maurizio Sasso ◽  
Peter Tzscheutschler
Keyword(s):  
Energy Saving ◽  
High Efficiency ◽  
Thermal Power ◽  
Experimental Tests ◽  
Energy Performance ◽  
Primary Energy ◽  
Economic Feasibility ◽  
Operating Conditions ◽  
Hot Water ◽  
Test Facility

Microcogeneration can guarantee sensible primary energy savings and greenhouse gas emissions reductions in the residential sector. In this paper, the results of experimental tests carried out on a microcogenerator (5.5 kW electric power and 14.8 kW thermal power) based on a natural gas fuelled internal combustion engine, integrated with a condensing boiler, have been analyzed. Tests have been performed out at Institute for Energy Economy and Application Technology (IfE) of Technical University of Munich (Germany). The test facility allowed to simulate the thermal energy requirements of a real residential application, represented by a Multi Family House consisting of 10 apartments, and to evaluate the energy flows of the conversion devices in actual operating conditions. Four type days, characteristic of Mediterranean climatic conditions, have been used to define space heating and domestic hot water user’s requirements. Experimental tests have been performed to implement energy and environmental analysis, comparing the system consisting of cogenerator and integration boiler with a reference system. Results showed that the former can achieve a primary energy saving of about 6%, and CO2 equivalent emissions reduction of about 12%. Finally, the algorithm defined by the European Directive on the promotion of high efficiency cogeneration has been implemented; it demonstrated that the primary energy saving is well above the limit value prescribed by the Directive. Therefore the cogeneration plant can access support mechanisms that can help to achieve the economic feasibility of the system, besides energy and environmental benefits.

Computational assessment of a full-scale Mediterranean building incorporating wallboards with phase change materials

2016 ◽  
Vol 26 (10) ◽  
pp. 1429-1443 ◽  
Author(s):  
Marianna E. Stamatiadou ◽  
Dimitrios I. Katsourinis ◽  
Maria A. Founti
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Energy Savings ◽  
Cooling System ◽  
Residential Building ◽  
Energy Performance ◽  
Energy Potential ◽  
Two Phase ◽  
Change Temperature ◽  
Cooling Loads

In this study, a lightweight residential building in Greece was investigated, focusing on the summer comfort when wallboards with phase change materials (PCM) were installed in the external and internal walls. The effectiveness of the PCM wallboards installed was numerically assessed, while the energy performance of the building was examined, in order to quantify the effect of PCM in the annual cooling load needs, as a way of saving energy. Potential bigger energy savings were evaluated by defining the appropriate PCM melting temperature range and the ‘energy-conscious’ occupant behaviour (passive vs. active). Results were expressed in terms of percentage savings of cooling loads and with comparison to wall elements incorporated with plain gypsumboards instead of the PCM wallboards. The optimum phase change temperature change for the specific location was investigated by examining two-phase change transition temperatures of the PCM wallboards (PCM24 and PCM26 respectively). The use of PCM24 produced a 29% reduction of annual cooling loads, compared to 16% reduction produced by PCM26. Five scenarios were also examined, showing the behaviour of the PCM which was enhanced when a cooling system was installed. The cooling needs were lowered by an average of 25.7%, compared to the respective no-PCM scenarios.

scholarly journals Investigation of the envelope’s thermal transmittance influence on the energy efficiency of residential buildings under various Mediterranean region climates

2021 ◽  
Vol 899 (1) ◽  
pp. 012009
Author(s):  
A C Karanafti ◽  
T G Theodosiou
Keyword(s):  
Energy Efficiency ◽  
Residential Buildings ◽  
Residential Building ◽  
Energy Performance ◽  
Building Envelope ◽  
Ambient Conditions ◽  
Cooling Period ◽  
Thermal Transmittance ◽  
System A ◽  
Mediterranean Regions

Abstract Improving the energy efficiency of residential buildings is of outmost importance for reducing their environmental footprint. Recent studies demonstrate that a highly insulated building envelope may burden the building’s performance during the cooling period, especially in regions with hot summers. In this study, the energy performance of a residential building in different Mediterranean regions (Jordan, Greece, Iraq, Egypt, Syria, Morocco, Cyprus, Saudi Arabia, Libya, and Spain) is investigated. Two thermal transmittance values are applied to the building shell, a scenario with a very low one and a scenario with a higher one, to examine under which conditions the cooling performance is improved. A dynamic insulation configuration is also implemented, and its operation is studied for the cooling period of each city. It is concluded that in Southern European and Northern African regions building envelopes with lower thermal resistances perform better, while in even Southern regions an increased thermal resistance may prevent the heat from entering the building more effectively. With the switching insulation system, a great reduction in the cooling demands was reported, which reached up to 50% in Spain, and it was shown that in the southern regions the configuration’s operation should be customized to the ambient conditions to optimize its performance.

scholarly journals NZEB and market-based renovation case study of an existing office building

2021 ◽  
Vol 246 ◽  
pp. 05002
Author(s):  
Helena Kuivjõgi ◽  
Jarek Kurnitski ◽  
Aivar Uutar ◽  
Martin Thalfeldt
Keyword(s):  
Energy Use ◽  
Public Support ◽  
Residential Building ◽  
Fold Increase ◽  
Energy Performance ◽  
Primary Energy ◽  
Office Building ◽  
Pv System ◽  
Building Stock ◽  
The Government

The goal of decarbonizing the building stock in the EU requires a multi-fold increase of the current renovation rates. In Estonia, the non-residential building sector has had little or no public support to improve the energy efficiency. Therefore, it is essential to study the energy efficient and cost-optimal measures for non-residential building renovation to give guidance to real estate companies and other stakeholders about the renovation alternatives. Furthermore, crucial is to provide input to the government to develop the renovation grant and incentives for renovation. In this study, energy renovation measures and savings to improve the energy performance to NZEB level were identified in a large (16 990 m2 heated area) office building. For that purpose, energy use was measured, simulation model developed and calibrated, feasible and more comprehensive energy improvements and costs analysed. The improvement of lighting, AHU, heating, installation of a 69 kW PV system, and window replacement was needed to achieve the goal with a primary energy use of 163 kWh/m2. However, some of the applied measures had long payback times of 40-70 years and are not realistic to be implemented without renovation incentives.

scholarly journals Energy and Ecological Evaluation of ORC Based Geothermal CHP Plant in Poland – A Case Study

2019 ◽  
Author(s):  
Tomasz Mróz ◽  
Weronika Grabowska
Keyword(s):  
Carbon Dioxide Emission ◽  
Evaluation Criteria ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Energy Performance ◽  
Primary Energy ◽  
Point Of View ◽  
Operating Conditions ◽  
Performance Criteria

The paper presents the results of energy and environmental analysis of geothermal CHP plant operation in Polish conditions. As the most favorable, for the geothermal conditions prevailing in Poland, the variant of CHP plant based on Organic Rankine Cycle (ORC) has been taken into consideration. As the case study the existing geothermal well located in the town of Konin in the Wielkopolska voivodship has been chosen. The conceptual design of CHP plant has been proposed and evaluated from energy and environmental point of view. As energy performance criteria the non-renewable primary energy consumption has been chosen. In case of environmental performance carbon dioxide emission has been taken as evaluation criteria. The analysis has been performed for different operating conditions and three working fluids.

Sign in / Sign up

Export Citation Format

Share Document