scholarly journals Galvanic pH sensor for continuous monitoring of soil parameters in agriculture

2021 ◽  
Vol 2140 (1) ◽  
pp. 012023
Author(s):  
M S Yuzhakov ◽  
D I Filchenko ◽  
A V Badin ◽  
A K Berzin

Abstract The article discusses trends in agriculture development in digitalization direction, substantiates need for monitoring pH level throughout year. The main solutions existing on market at moment are given, as well as need to develop a pH sensor for USKD-Agro hardware and software complex. The article discusses in detail the ongoing physical and chemical processes, on them basis pH level is determined, circuitry solutions used, as well as pH sensor implementation. The article describes the sensor calibration process, methodology and test results.

ELKHA ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 99
Author(s):  
Ali Basrah Pulungan ◽  
Aditya Manggala Putra ◽  
Hamdani Hamdani ◽  
Hastuti Hastuti

This study aims to make a tool that can monitor the condition of the pH level and water turbidity in fish ponds so that fish growth can be maximized. This fish pond has a control system that can be controlled automatically. The purpose of using this control is to get maximum results and to save water use in fish ponds This tool has two sensors consisting of a TDS-10 sensor which functions to detect the turbidity level of water in fish ponds and a pH sensor which functions to detect the pH level of the water in the fish pond. Comparison with previous research, the application of fish ponds with a size of 3 x 4 meters so that observations about how the tools work and the success rate of the tools can be observed more intensively. In addition, the ESP8266 wifi module is supported as a collaboration monitoring center without the need to come to the location directly Based on the test results of the TDS-10 sensor and pH sensor that have been carried out in the fish pond, the test results show good performance with the proportion of detection error of the TDS-10 sensor (4.8 NTU) to the set point (5 NTU) is 4%.


Author(s):  
Rizki Putri Nur Laili ◽  
Farida Arinie Soelistianto Arinie Soelistianto ◽  
Nanak Zakaria ◽  
Nurul Hidayati

Tofu has the best quality vegetable protein because it has the most complete amino acid composition and is believed to have high digestibility (85% -98%). According to SNI 01-3142-1998 and SII No. 0270-1990 testing criteria for soy tofu based on smell, taste, color, appearance, or texture. Tofu soybeans are prone to physical or texture damage due to factors such as inappropriate pH levels and insufficient storage which results in damaged tofu. Therefore in this study, it is proposed to determine the elasticity of soy tofu with the parameters tested are the pH level in the manufacture of soy tofu, the storage temperature, and the capacitance value to see how thick the tofu is with a capacitive sensor using the capacitor principle. Where the parallel plate capacitor is a capacitor consisting of two parallel metal plates. The test results of all sensors are sent to the database and will be displayed on the page on the Android application which will provide real-time sensor output information to the user. Based on the results of testing on this system using a pH sensor, the pH value is around 3-4 which indicates that the pH level used is very good for use in tofu processing, at pH 4.56 with storage at 29 ° C the highest elastic capacitance value is 3.58.  In testing data delivery, the throughput value is 4336,217 b / s and the smallest delay value is 0.017ms because the smaller the delay value, the better the quality of data transmission because there will be no delay in sending data.


2021 ◽  
Vol 11 (3) ◽  
pp. 1273
Author(s):  
Chen Feng ◽  
Jiping Zhou ◽  
Xiaodong Xu ◽  
Yani Jiang ◽  
Hongcan Shi ◽  
...  

In recent years, 3D printing has received increasing attention from researchers. This technology overcomes the limitations of traditional technologies by printing precise and personalized scaffold with arbitrary shapes, pore structures, and porosities for the applications in various tissues. The cellulose nanocrystal (CNC) is extracted from Humulus Japonicus (HJS) and mixed with poly(ε-caprolactone) (PCL) to prepare a series of CNC/PCL composites for printing. Based on the analysis of the physical and chemical properties of the series of the CNC/PCL composites, an optimal mass ratio of CNC to PCL was obtained. The Solidworks was used to simulate the stretching and compression process of the scaffolds with three different patterns under an external force. The flow of nutrient solution in the scaffolds with different patterns was simulated by ANSYS FLUENT, and then a new optimization scaffold pattern with a concave hexagon shape was advised based on the simulation results. Collectively, the mechanical test results of the material and scaffold confirmed that the optimal filling amount of the CNC was 5%, and the scaffold pattern with concave hexagon shape exhibited better mechanical properties and suitable for the transport of cells and nutrients, which is expected to be more widely used in 3D printing.


2019 ◽  
Vol 17 (1) ◽  
pp. 1459-1465
Author(s):  
Xuedong Feng ◽  
Jing Yi ◽  
Peng Luo

AbstractWith the purpose of studying the influence of NO/O2 on the NOx storage activity, a Pt-Ba-Ce/γ-Al2O3 catalyst was synthesized by an acid-aided sol-gel method. The physical and chemical properties of the catalyst were characterized by X-ray diffraction (XRD) and Transmission Electron Microscope (TEM) methods. The results showed that the composition of the catalyst was well-crystallized and the crystalline size of CeO2 (111) was about 5.7 nm. The mechanism of NO and NO2 storage and NOx temperature programmed desorption (NO-TPD) experiments were investigated to evaluate the NOx storage capacity of the catalyst. Pt-Ba-Ce/γ-Al2O3 catalyst presented the supreme NOx storage performance at 350℃, and the maximum value reached to 668.8 μmol / gcat. Compared with O2-free condition, NO oxidation to NO2 by O2 had a beneficial effect on the storage performance of NOx. NO-TPD test results showed that the NOx species stored on the catalyst surface still kept relatively stable even below 350℃.


1990 ◽  
Vol 27 (5) ◽  
pp. 531-545 ◽  
Author(s):  
D. T. Bergado ◽  
K. C. Chong ◽  
P. A. M. Daria ◽  
M. C. Alfaro

This study centred on the performance of the screw plate test (SPLT) to determine the deformability and consolidation characteristics of soft Bangkok clay. For comparison, a series of stress-path-controlled triaxial consolidation tests (tri) were carried out on good quality samples of Bangkok clay taken from the same testing sites and imposed with the same loading conditions as the screw plate tests. Undrained and drained moduli and coefficients of consolidation were obtained from the stress-path-controlled triaxial consolidation tests and were compared with the corresponding values of the screw plate test. In addition, the ultimate bearing capacity was derived from the pressure–deformation relationships of the screw plate test results. A graphical method was used to compute the coefficient of consolidation from the screw plate tests and from stress-path-controlled triaxial consolidation test results. The compressibility data were also obtained from conventional oedometer tests (oed). Both cv (SPLT)/cv (tri) and cv (SPLT)/cv(oed) ratios compared favorably with the cv (field)/cv (laboratory) ratio obtained from past investigations. The data from pressure–settlement–time relationships of the screw plate tests were used to successfully predict values that compared favorably with the measured values at each stress level. The pressure–deformation–time relationship from stress-path-controlled triaxial consolidation tests were also evaluated, and they indicated behaviour similar to that of the screw plate test results. Soil parameters obtained from screw plate tests were subsequently used to predict the settlement of two test embankments, giving fairly close agreement with the observed values. Key words: soft clay, settlement, deformation, consolidation, screw plate test, triaxial test, embankment, prediction, stress path.


2016 ◽  
Vol 15 (3) ◽  
pp. 7-14 ◽  
Author(s):  
M. A. Koroleva ◽  
I. S. Koroleva ◽  
I. M. Zakroeva ◽  
I. M. Gruber

Relevance. One of the prognostic criteria meningococcal infection (MI) epidemic status process is the increasing number of resistant to antibiotics meningococcal strains. Aim of this study was to investigate the dynamics of invasive strains of N. meningitidis susceptibility to antibiotics in Moscow in 2006 - 2015. Materials and methods. Studied 98 strains of N. meningitidis, isolated from blood and cerebrospinal fluid of patients with MI. The study changes of sensitivity N. meningitidis to antibiotics was occured in two periods: first -2006 - 2011 and second - 2012 - 2015. The MIC was determined by E-test. Results. In the present study revealed for the first time the Russian strains of N. meningitidis, moderately resistant to penicillin (5 strains) and resistant to rifampicin (3 strains). Among the studied strains were not found resistant to ceftriaxone, ciprofloxacin, tetracycline and chloramphenicol. Discussion. Comparison results two study periods allowed to reveal the dynamics of increasing the sensitivity of N. meningitidis to antibiotics, which confirms the decline in meningococcal virulence, and as a result, continued interepidemic MI period. Conclusions. Despite the decline antibakterial resistance is required continuous monitoring.


2014 ◽  
pp. 75-80
Author(s):  
Károly Bakos ◽  
Attila Dobos ◽  
János Nagy

In this article we are presenting the methodology applied to analyse and interpret the topsoil surface reflectance parameters of multiple samples collected in the Mugello valley area in northern Italy in October 2012. The main aim of the whole project was to discover geomorphological behaviour and situation of the area ino order to improve potential for correct dating of certain archaeological artefacts found in the nearby areas. One of the crucial problem researchers are facing in the area is the lack of understanding of the underlying geological and geomorphological processes that were describing and characterizing the area and that played important role not only in the current geography and landscape formation but also in the transportation of various sediments and artefacts. In this particular research the main aim is to examine the possibility of developing a quick way to assess low level properties of the soil using hand held spectrometer and rapid analysis of cross-section using in situ measurement techniques. In this work we collected over 2000 individual samples of topsoil surface reflectance properties that we organized into a spectral library. This library is then to be used to describe physical and chemical processes in the soil. To support the analysis results were compared to analysis results from different kind of assessments in the same area. Our results show a great potential of application of hand held imaging spectrometer in soil property analysis based on the top soil surface reflectance parameters.


2020 ◽  
Vol 22 (2) ◽  
pp. 149-155
Author(s):  
Iskandar ◽  
Rabiya

Soil consolidation testing using an oedometer and rowe cell. Oedometers are often used on clay and soft soils. However, in the development of the rowe cell device, the results of lowering soft soil were better than the oedometer. The advantage of this rowe cell is that it can determine the saturation value of the soil samples tested. The rowe cell tester can measure the pore water pressure at the beginning and end of each consolidation stage. This rowe cell can provide suitable settlement for soft soils. This consolidation test to obtain soil parameters such as Cv and Cc by using the rowe cell tool. After that, from the test results, the two tools were compared.


2014 ◽  
Vol 13 (4-8) ◽  
pp. 147-155
Author(s):  
N. Alifar ◽  
A.R. Zaharah ◽  
C.F. Ishak ◽  
Y. Awang ◽  
B. Khayambash

Sign in / Sign up

Export Citation Format

Share Document