scholarly journals Light yield and field dependence measurement in PandaX-II dual-phase xenon detector

2022 ◽  
Vol 17 (01) ◽  
pp. P01008
Author(s):  
Z. Huang ◽  
A. Abdukerim ◽  
Z. Bo ◽  
W. Chen ◽  
X. Chen ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Energy Deposition ◽  
Light Yield ◽  
Phase Detector ◽  
Detector Response ◽  
Dual Phase ◽  
Sensitive Volume ◽  
Liquid Xenon ◽  
Time Projection

Abstract The dual-phase xenon time projection chamber (TPC) is one of the most sensitive detector technology for dark matter direct search, where the energy deposition of incoming particle can be converted into photons and electrons through xenon excitation and ionization. The detector response to signal energy deposition varies significantly with the electric field in liquid xenon. We study the detector's light yield and its dependence on the electric field in the PandaX-II dual-phase detector containing 580 kg liquid xenon in the sensitive volume. From our measurements, the light yield at electric fields from 0 V/cm to 317 V/cm is obtained for energy depositions up to 236 keV.

scholarly journals Development of a dual-phase xenon TPC with a quartz chamber for direct dark matter searches

2020 ◽  
Vol 2020 (11) ◽  
Author(s):  
Kazufumi Sato ◽  
Masaki Yamashita ◽  
Koichi Ichimura ◽  
Yoshitaka Itow ◽  
Shingo Kazama ◽  
...  
Keyword(s):  
Dark Matter ◽  
Electric Fields ◽  
Light Yield ◽  
Development Stage ◽  
Dual Phase ◽  
Sensitive Volume ◽  
Liquid Xenon ◽  
Calibration Source ◽  
External Interference ◽  
Direct Dark Matter

Abstract The idea of a hermetic quartz chamber in a dual-phase xenon time projection chamber (TPC) has the potential to improve the detector sensitivity for direct dark matter searches in the future. A major challenge facing TPC detectors in future dark matter experiments will be the reduction of the internal background such as $^{222}$Rn and the deterioration of the ionization signal due to electronegative impurities. The hermetic quartz chamber can isolate the TPC’s sensitive volume from external interference and is thus expected to prevent contamination caused by radioactive and electronegative impurities, which originate from the outer detector materials. At the Kamioka Observatory in Japan, we have developed a TPC with a quartz chamber that contains a ⌀$ 48 \times 58$ mm volume of liquid xenon. At this development stage, we have not aimed for perfect hermeticity of the quartz chamber. Our aim here is twofold: first, to demonstrate via the use of a calibration source that the presence of quartz materials in the TPC does not impact its operation; and second, to perform quantitative measurements of the TPC’s characteristics. We successfully measured electron drift velocities of 1.2–1.7 mm/$\mu$s in liquid xenon under electric fields ranging from 75–384 V/cm, and also observed small S2 signals produced by a single ionized electron with a light yield of 16.5 $\pm$ 0.5 PE. These results were consistent with the expected values; therefore, our demonstrations provide a proof of principle for TPCs incorporating a quartz chamber.

scholarly journals GPU simulation with Opticks: The future of optical simulations for LZ

2021 ◽  
Vol 251 ◽  
pp. 03037
Author(s):  
Oisín Creaner ◽  
Simon Blyth ◽  
Sam Eriksen ◽  
Lisa Gerhardt ◽  
Maria Elena Monzani ◽  
...  
Keyword(s):  
Dark Matter ◽  
Graphics Processing Unit ◽  
Detector Response ◽  
Processing Unit ◽  
Sensitive Volume ◽  
Photon Propagation ◽  
Speed Up ◽  
Increase In Accuracy ◽  
Time Projection ◽  
Detector Configurations

The LZ collaboration aims to directly detect dark matter by using a liquid xenon Time Projection Chamber (TPC). In order to probe the dark matter signal, observed signals are compared with simulations that model the detector response. The most computationally expensive aspect of these simulations is the propagation of photons in the detector’s sensitive volume. For this reason, we propose to offload photon propagation modelling to the Graphics Processing Unit (GPU), by integrating Opticks into the LZ simulations workflow. Opticks is a system which maps Geant4 geometry and photon generation steps to NVIDIA’s OptiX GPU raytracing framework. This paradigm shift could simultaneously achieve a massive speed-up and an increase in accuracy for LZ simulations. By using the technique of containerization through Shifter, we will produce a portable system to harness the NERSC supercomputing facilities, including the forthcoming Perlmutter supercomputer, and enable the GPU processing to handle different detector configurations. Prior experience with using Opticks to simulate JUNO indicates the potential for speed-up factors over 1000× for LZ, and by extension other experiments requiring photon propagation simulations.

scholarly journals Calibration of Calorimetric Measurement in a Liquid Argon Time Projection Chamber

Instruments ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 2
Author(s):  
Tingjun Yang
Keyword(s):  
Time Projection Chamber ◽  
Energy Deposition ◽  
Electron Attachment ◽  
Liquid Argon ◽  
Detector Response ◽  
Calorimetric Measurement ◽  
Digital Converter ◽  
Charge Effects ◽  
Analog To Digital ◽  
Time Projection

The liquid argon time projection chamber provides high-resolution event images and excellent calorimetric resolution for studying neutrino physics and searching for beyond-standard-model physics. In this article, we review the main physics processes that affect detector response, including the electronics and field responses, space charge effects, electron attachment to impurities, diffusion, and recombination. We describe methods to measure those effects, which are used to calibrate the detector response and convert the measured raw analog-to-digital converter (ADC) counts into the original energy deposition.

scholarly journals The electric field dependence of single electron emission in the PIXeY two-phase xenon detector

2021 ◽  
Vol 16 (12) ◽  
pp. P12015
Author(s):  
E. Bodnia ◽  
E.P. Bernard ◽  
A. Biekert ◽  
E.M. Boulton ◽  
S.B. Cahn ◽  
...  
Keyword(s):  
Electric Field ◽  
Field Dependence ◽  
Electron Emission ◽  
Particle Identification ◽  
Single Electron ◽  
Dual Phase ◽  
Two Phase ◽  
Electric Field Dependence ◽  
Galactic Dark Matter ◽  
Time Projection

Abstract Dual phase xenon detectors are widely used in experimental searches for galactic dark matter particles. The origin of single electron backgrounds following prompt scintillation and proportional scintillation signals in these detectors is not fully understood, although there has been progress in recent years. In this paper, we describe single electron backgrounds in 83mKr calibration events and their correlation with drift and extraction fields, using the Particle Identification in Xenon at Yale (PIXeY) dual-phase xenon time projection chamber. The single electron background induced by the Fowler-Nordheim (FN) effect is measured, and its electric field dependence is quantified. The photoionization of grids and impurities by prompt scintillation and proportional scintillation also contributes to the single electron background.

Tuning the Electric Field Response of MOFs by Rotatable Dipolar Linkers

2019 ◽  
Author(s):  
Johannes P. Dürholt ◽  
Babak Farhadi Jahromi ◽  
Rochus Schmid
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Structural Changes ◽  
Dielectric Behavior ◽  
Two Dimensions ◽  
Dielectric Constants ◽  
Electric Response ◽  
Dipole Strength ◽  
Metal Organic ◽  
Dynamics Simulations

Recently the possibility of using electric fields as a further stimulus to trigger structural changes in metal-organic frameworks (MOFs) has been investigated. In general, rotatable groups or other types of mechanical motion can be driven by electric fields. In this study we demonstrate how the electric response of MOFs can be tuned by adding rotatable dipolar linkers, generating a material that exhibits paralectric behavior in two dimensions and dielectric behavior in one dimension. The suitability of four different methods to compute the relative permittivity κ by means of molecular dynamics simulations was validated. The dependency of the permittivity on temperature T and dipole strength μ was determined. It was found that the herein investigated systems exhibit a high degree of tunability and substantially larger dielectric constants as expected for MOFs in general. The temperature dependency of κ obeys the Curie-Weiss law. In addition, the influence of dipolar linkers on the electric field induced breathing behavior was investigated. With increasing dipole moment, lower field strength are required to trigger the contraction. These investigations set the stage for an application of such systems as dielectric sensors, order-disorder ferroelectrics or any scenario where movable dipolar fragments respond to external electric fields.

scholarly journals Meta-Deflectors Made of Dielectric Nanohole Arrays with Anti-Damage Potential

Photonics ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 107
Author(s):  
Haichao Yu ◽  
Feng Tang ◽  
Jingjun Wu ◽  
Zao Yi ◽  
Xin Ye ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Laser Cutting ◽  
High Complexity ◽  
Damage Potential ◽  
Optical Components ◽  
Nanohole Arrays ◽  
Intense Light ◽  
Polarization Of Light ◽  
Air Hole

In intense-light systems, the traditional discrete optical components lead to high complexity and high cost. Metasurfaces, which have received increasing attention due to the ability to locally manipulate the amplitude, phase, and polarization of light, are promising for addressing this issue. In the study, a metasurface-based reflective deflector is investigated which is composed of silicon nanohole arrays that confine the strongest electric field in the air zone. Subsequently, the in-air electric field does not interact with the silicon material directly, attenuating the optothermal effect that causes laser damage. The highest reflectance of nanoholes can be above 99% while the strongest electric fields are tuned into the air zone. One presentative deflector is designed based on these nanoholes with in-air-hole field confinement and anti-damage potential. The 1st order of the meta-deflector has the highest reflectance of 55.74%, and the reflectance sum of all the orders of the meta-deflector is 92.38%. The optothermal simulations show that the meta-deflector can theoretically handle a maximum laser density of 0.24 W/µm2. The study provides an approach to improving the anti-damage property of the reflective phase-control metasurfaces for intense-light systems, which can be exploited in many applications, such as laser scalpels, laser cutting devices, etc.

scholarly journals Integrating flexible electronics for pulsed electric field delivery in a vascularized 3D glioblastoma model

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Marie C. Lefevre ◽  
Gerwin Dijk ◽  
Attila Kaszas ◽  
Martin Baca ◽  
David Moreau ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Flexible Electronics ◽  
Soft Tissues ◽  
Multiphoton Microscopy ◽  
Membrane Integrity ◽  
Tumor Model ◽  
Pulsed Electric Fields ◽  
In Ovo ◽  
Cell Membrane Integrity

AbstractGlioblastoma is a highly aggressive brain tumor, very invasive and thus difficult to eradicate with standard oncology therapies. Bioelectric treatments based on pulsed electric fields have proven to be a successful method to treat cancerous tissues. However, they rely on stiff electrodes, which cause acute and chronic injuries, especially in soft tissues like the brain. Here we demonstrate the feasibility of delivering pulsed electric fields with flexible electronics using an in ovo vascularized tumor model. We show with fluorescence widefield and multiphoton microscopy that pulsed electric fields induce vasoconstriction of blood vessels and evoke calcium signals in vascularized glioblastoma spheroids stably expressing a genetically encoded fluorescence reporter. Simulations of the electric field delivery are compared with the measured influence of electric field effects on cell membrane integrity in exposed tumor cells. Our results confirm the feasibility of flexible electronics as a means of delivering intense pulsed electric fields to tumors in an intravital 3D vascularized model of human glioblastoma.

Sign in / Sign up

Export Citation Format

Share Document