scholarly journals In Deep Mining Working Face Rock Burst Evaluation by Multifactor Coupling Method

2019 ◽  
Vol 242 ◽  
pp. 032047
Author(s):  
Xuanye Qin ◽  
Yinghua Zhang ◽  
Cholnam Kim
Keyword(s):  
Rock Burst ◽  
Coupling Method ◽  
Deep Mining ◽  
Working Face ◽  
Multifactor Coupling

scholarly journals A Control Method of Rock Burst for Dynamic Roadway Floor in Deep Mining Mine

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Zhimin Xiao ◽  
Jun Liu ◽  
Shitan Gu ◽  
Mingqing Liu ◽  
Futian Zhao ◽  
...  
Keyword(s):  
Rock Burst ◽  
Control Method ◽  
Tectonic Stress ◽  
Surrounding Rock ◽  
Floor Rock ◽  
Deep Mining ◽  
Failure Characteristics ◽  
Deformation And Failure ◽  
Working Face ◽  
Geological Conditions

Roadway floor rock burst is an important manifestation of rock bursts in deeply buried mines. With the increase of mining depth and mining intensity, rock burst disasters in the roadway floor such as floor heaves are becoming more serious. The article investigated the roadway floor severe heave caused by floor rock burst during excavation of the No. 3401 working face, which was controlled by an anticlinal structure and deep mining in Shandong Mine, China. Firstly, by analyzing geological conditions of the working face, roadway support parameters, and characteristics of coal and rock, it was revealed that high tectonic stress and high crustal stress were main causes of the floor rock burst. Secondly, based on the Theory of Mechanics and Theory of Energy, the energy conversion process in the roadway floor was discussed, and the rock burst condition caused by elastic energy in the roadway floor was analyzed. The failure characteristics of roadway-surrounding rock were also inspected, using a borehole recorder. The roof and sidewalls of roadway mainly contained fissures and cracks, whereas cracks and broken areas are distributed in the roadway floor. Finally, based on the deformation and failure characteristics of roadway-surrounding rock, a method termed “overbreaking-bolting and grouting-backfill” was proposed to control roadway floor rock burst. The method was tested in the field, and the results showed that it could effectively control the deformation of roadway floor and rock burst, guaranteeing the stability of roadway floor. This impact control method for the roadway floor can provide a reference for the prevention and control of roadway rock burst in mines with similar geological conditions.

scholarly journals Effect of Advancing Direction of Working Face on Mining Stress Distribution in Deep Coal Mine

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Yuesong Tang ◽  
Wenchao Sun ◽  
Xin Zhang ◽  
Pengju Liu
Keyword(s):  
Stress Distribution ◽  
Large Scale ◽  
In Situ Stress ◽  
Deep Mining ◽  
Deep Coal Mine ◽  
Working Face ◽  
Geological Conditions ◽  
Original Rock ◽  
High Level

Deep mining has become the normal state of coal mining; compared with the mine with shallow buried depth, the consequent high level of in situ stress and complex distribution have brought severe threats to the stability of the stope and the surrounding rock of the roadway. In this research, taking the 121304 working face of Kouzidong Mine as the engineering background, the characteristics of mining-induced stress distribution under complex in situ stress environment in deep mining are analyzed by using on-site measurement of the original rock stress and mining stress, establishing a theoretical model centered on the middle section of the working face, and establishing large-scale numerical calculation models for different advancing directions. It was found that under deep mining conditions, the maximum stress of the original rock is 25.12 MPa, and the direction is vertical. The advanced influence range of mining stress is about 150 m, and the abutment pressure presents a three-peak distribution characteristic in front of the working face. The research results provide important theoretical guiding value for guiding the mining of coal mines with similar geological conditions.

Analysis on rock burst danger when fully-mechanized caving coal face passed fault with deep mining

2012 ◽  
Vol 50 (4) ◽  
pp. 645-648 ◽  
Author(s):  
Xuehua Chen ◽  
Weiqing Li ◽  
Xianyang Yan
Keyword(s):  
Rock Burst ◽  
Coal Face ◽  
Deep Mining

scholarly journals Research on the Source Mechanism and Source Prevention and Control System of Deep Rock Burst

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Shuai Di
Keyword(s):  
Control System ◽  
Rock Mass ◽  
Rock Burst ◽  
Prevention And Control ◽  
Economic Benefits ◽  
Efficient Production ◽  
Targeted Prevention ◽  
Working Face ◽  
Deep Rock ◽  
And Control

Deep rock burst accidents occur frequently and become increasingly serious. Further improving the effectiveness and accuracy of the prevention and control of rock burst, ensuring the safe and efficient production of mines, clarifying the basic causes of disasters, and refining the type of deep rock burst are the most important key links. Aiming at the problems such as unclear incentives and types and the lack of effective and targeted prevention measures of deep rock burst, taking Xin’an Mine as the research background, based on the energy theory, the coal and rock mass multisource energy unified equation was established to analyze coal and rock mass instability mechanism. According to the different degrees of participation of various factors, the types of deep rock burst are determined as three categories and four types, and the corresponding judgment criteria are proposed. The precise prevention and control system for the source of rock burst with Xin’an characteristics is proposed, successfully applied to the 8101 working face, which not only guarantees the safe production of the working face, but also achieves good economic benefits. The research results lay the foundation for improving the accuracy and precision of the prevention and control of deep rock burst and provide theoretical guidance for the safe and efficient mining of the mine.

Research Foundation of Rock-Burst Hazard Control for Mining Pattern with No Pillar

2010 ◽  
Vol 156-157 ◽  
pp. 207-210
Author(s):  
Zhi Jie Wen ◽  
Lian Jun Chen ◽  
Xiao Dong Zhao ◽  
Chuan Zhang
Keyword(s):  
Rock Burst ◽  
Abutment Pressure ◽  
Relevant Information ◽  
Mechanics Model ◽  
Working Face ◽  
Hazard Control ◽  
Time Space ◽  
Relationship Of ◽  
The Relationship ◽  
Realization Condition

In order to effectively prevent the rock burst occurrence for mining patter with no pillar, the reason and its realization condition of rock burst were studied; the stope structure mechanics model with working face mining was built; four phases of rock burst occurrence with mining were proposed; the relationship between rock burst occurrence and abutment pressure law of development was analyzed, time-space coupling relationship of rock burst and its relevant information for rock burst control were obtained.

scholarly journals Experimental Study on the Effect of Advancing Speed and Stoping Time on the Energy Release of Overburden in an Upward Mining Coal Working Face with a Hard Roof

2019 ◽  
Vol 12 (1) ◽  
pp. 37 ◽  
Author(s):  
Feng Cui ◽  
Yanbin Yang ◽  
Xingping Lai ◽  
Chong Jia ◽  
Pengfei Shan
Keyword(s):  
Coal Seam ◽  
Energy Release ◽  
Rock Burst ◽  
Response Ratio ◽  
Working Face ◽  
Significant Difference ◽  
Loading And Unloading ◽  
Microseismic Events ◽  
Microseismic Event ◽  
The Impact

In order to study the influence of advancing speed and stoping time of a coal face on the scale and frequency of rock burst, the energy release characteristics of an overburden fracture under six advancing speeds and four stoping times are studied by theoretical analysis and similar simulation experiments. The distribution characteristics of microseismic events before and after stoppage are compared, and the load/unload response ratio is introduced to analyze the relationship between the synergistic effect of advancing speed and stoping time and the characteristics of microseismic events in coal and rock mass. The mechanism of rock burst induced by the advancing speed and stoping time effect in the working face is studied, and the coordinated regulation and mitigation of advancing speed and stoping time are analyzed and completed. The results show that the effect of advancement speed and stoping time is very important to the energy release of overburden. The energy released by microseismic events during stoping is exponentially related to the advancing speed. The change of advancing speed causes the change of microseismic event characteristics, reflecting the evolution process of overburden structure and its energy. During stoping, the secondary microseismic events disturbed by mining occur frequently, leading to the significant difference of energy released by microseismic events during stoping. After stoping, the microseismic energy is more than four times higher than that during the stop period, and the risk of coal seam impact is high during the stope period. The synergetic change of advancement speed and stoping time changes the cycle of energy accumulation and release. The response ratio of loading and unloading considering the effect of advancement speed and stoping time is established by using the corresponding ratio of loading and unloading, and the impact risk of the coal seam is quantitatively analyzed. Based on the monitoring and analysis of microseismic events, the safety mining index of coordinated control with the energy of a single microseismic event of 180 J is established, and the best advancing speed of the working face is determined to be 4 m/d. According to the corresponding ratio of loading and unloading, the reasonable stoping time of different advancing speeds and the corresponding advancing speed of different stoping times after the resumption of mining are determined, so as to provide a reference for the safe and efficient mining of similar rock burst mines.

scholarly journals Research of Rock Burst Risk Induced by Mining and Field Case in Anticlinal Control Area

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Shitan Gu ◽  
Zhimin Xiao ◽  
Bangyou Jiang ◽  
Ruifeng Huang ◽  
Peng Shan
Keyword(s):  
Rock Burst ◽  
Abutment Pressure ◽  
Elastic Strain Energy ◽  
Tectonic Stress ◽  
Residual Energy ◽  
Theoretical Research ◽  
Energy Principle ◽  
Unique Type ◽  
Working Face ◽  
Rock Burst Risk

Stress concentration caused by tectonic stress and mining disturbance in coal mines induces a unique type of rock burst. No. 3201 working face controlled by an anticline structure in the Shandong mining area is used as the research background. The formation mechanism for anticlines is analyzed. Theoretical research shows that the bigger the tectonic couple is, the smaller the foundation stiffness, and the greater the bending degree and elastic strain energy of the coal will be. The distribution characteristics of abutment pressure and maximum principle stress in anticlinal control areas are analyzed using UDEC numerical software. The results show that rock bursts result from interactions between abutment pressure and residual tectonic stress. The “connection-overlay-separation” phenomenon of abutment pressure presents with working face advancement. Furthermore, the energy criterion for rock burst initiation is established based on the energy principle. Residual energy “E0−EC” and rock burst danger characteristics during mining are discussed. Based on the simulation results, microseismic monitoring data for No. 3201 working face are analyzed, and the law of microseismic energy is consistent with the variation law for the residual energy “E0−EC” at the peak of the simulated abutment pressure. The microseismic energy and frequency are higher during mining, increasing the risk of rock burst events. It can provide scientific basis for prevention and control of rock burst.

scholarly journals Features of separation water hazard in China coalmines

2017 ◽  
Vol 12 (1) ◽  
pp. 146-155 ◽  
Author(s):  
Herong Gui ◽  
Manli Lin ◽  
Xiaomei Song
Keyword(s):  
Case Studies ◽  
Rock Burst ◽  
Influencing Factors ◽  
Igneous Rock ◽  
Working Face ◽  
Hazard Control ◽  
Mining Conditions ◽  
Water Hazard ◽  
Bed Separation

Separation water is a commonly-seen water hazard in China coalmines. This article, built on case studies of disasters caused by separation water, analyzes the key influencing factors in the formation of separation and the water hazard, as well as the features and causes of explosive, delayed explosive, and intermittent separation water burst. The article takes as an example of one accident caused by roof bed separation water burst in the 745 working face of Haizi Coalmine. The study has a particular interest in separation water burst accompanied by rock burst when mining under thick-hard igneous rock. The results are of reference to countries with similar mining conditions and researches on separation water burst and hazard control in coalmines.

Sign in / Sign up

Export Citation Format

Share Document