scholarly journals Numerical simulation of performance evolution of anti-seepage curtains in the high water head tunnel surrounding rock

2021 ◽  
Vol 861 (7) ◽  
pp. 072112
Author(s):  
Tao Yu ◽  
Shaohua Hu ◽  
Guang Zhang ◽  
Moxiao Li ◽  
Peipei Gao
Keyword(s):  
Numerical Simulation ◽  
High Water ◽  
Surrounding Rock ◽  
Water Head

scholarly journals Effect of Concrete Micro-Mechanical Properties under the Coupled Corrosion of Sulfate and High Water Head

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5039
Author(s):  
Ruixin Li ◽  
Huiming Hou ◽  
Dawei Hu ◽  
Yiquan Zou
Keyword(s):  
Mechanical Properties ◽  
Numerical Simulation ◽  
Large Scale ◽  
Simulation Analysis ◽  
Corrosion Damage ◽  
High Water ◽  
Soil Pressure ◽  
Water Head ◽  
Seawater Environment ◽  
Micro Indentation

Large-scale water infrastructure such as immersed tunnels remain in a seawater environment for a long time, and gradually deteriorate under the action of high water head, soil pressure and corrosive ions in seawater solution. In order to simulate the corrosion damage and deterioration of concrete in seawater environment, 10% Na2SO4 solution was used to conduct indoor corrosion tests on concrete samples under different water heads and for different durations. The corrosion damage and micro-mechanical properties of concrete under the coupled action of high water head and sulfate are studied by micro-indentation tests. The effect of sulfate ion corrosion and complex mechanical loading was studied. The effect of micro-mechanical properties of concrete is studied on time and space. Numerical simulation and test results show that the results of micro-indentation are in good agreement with the fitting curves. The chemical damage rate and the corrosion depth increase with the increase of water head; the numerical simulation analysis shows that the sulfate concentration is high in the area where the mechanical damage variable is large, which indicates that the two kinds of corrosion occur in concrete and interact with each other.

Reasonable Entry Layout of Lower Seam in Multi-Seam Mining Based on Numerical Simulation

2013 ◽  
Vol 295-298 ◽  
pp. 2980-2984
Author(s):  
Xiang Qian Wang ◽  
Da Fa Yin ◽  
Zhao Ning Gao ◽  
Qi Feng Zhao
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Coal Seam ◽  
Coal Mine ◽  
Abutment Pressure ◽  
Surrounding Rock ◽  
Geological Conditions ◽  
Seam Mining

Based on the geological conditions of 6# coal seam and 8# coal seam in Xieqiao Coal Mine, to determine reasonable entry layout of lower seam in multi-seam mining, alternate internal entry layout, alternate exterior entry layout and overlapping entry layout were put forward and simulated by FLAC3D. Then stress distribution and displacement characteristics of surrounding rock were analyzed in the three ways of entry layout, leading to the conclusion that alternate internal entry layout is a better choice for multi-seam mining, for which makes the entry located in stress reduce zone and reduces the influence of abutment pressure of upper coal seam mining to a certain extent,. And the mining practice of Xieqiao Coal Mine tested the results, which will offer a beneficial reference for entry layout with similar geological conditions in multi-seam mining.

Numerical Simulation of Blasting-Induced Damage in Grouting Curtain of Sandstone Aquifer for Vertical Shaft

2015 ◽  
Vol 723 ◽  
pp. 271-278
Author(s):  
Yu Liang Zhou ◽  
Dong Feng Yuan ◽  
Jun Zheng ◽  
Hua Wang
Keyword(s):  
Numerical Simulation ◽  
Prevention And Control ◽  
Damage Zone ◽  
Surrounding Rock ◽  
Damage Effect ◽  
Vertical Shaft ◽  
Control Methods ◽  
Sandstone Aquifer ◽  
And Control ◽  
Dynamic Damage

To provide a theoretical basis for water prevention and control methods and reasonable supporting techniques for vertical shaft, and to ensure the shaft construction to pass the sandstone aquifer safely and rapidly, numerical simulation using dynamic damage constitutive model, which was a user-defined constitutive modules in FLAC3D, a lagrangian analysis code in three dimensions, has been applied to investigate the dynamic damage effect in the surrounding rock of the grouting curtain near the driving working face for vertical shaft excavated by blasting. The results indicate that the distribution of the damage zone in the surrounding rock of the shaft, which decreases the effective thickness of the grouting curtain, was like a ellip-se, and that the depth of the damage zone in the surrounding rock of the shaft grouting curtain is fewer than that of the driving face floor. It can be concluded that the centre part of the driving face floor, especially the cutting hole zones, and the shaft wall in the greater horizontal stress side are the " key parts " for shaft water prevention and control methods.

Numerical Simulation on the Effect of Compound Roof Separation Position on Bolting Performance

2014 ◽  
Vol 953-954 ◽  
pp. 1638-1642
Author(s):  
Ai Qing Liu ◽  
Jian Zhang ◽  
Peng Cheng ◽  
Yu Hai Zhang
Keyword(s):  
Numerical Simulation ◽  
Simulation Analysis ◽  
Surrounding Rock ◽  
Cohesive Force ◽  
Roof Strata ◽  
Poor Stability ◽  
Key Parameter

Prestress is a key parameter in bolting, while the cohesive force of layers in the compound roof strata is low and prone to separation, causing the prestress proliferation very poor. With the method of numerical simulation analysis,the location of separation in compound roof to affect the performance of bolting support was researched. It is concluded the roof separation in the edge of anchorage zone, the prestress field superpose, but is away from the deep surrounding rock and shows poor stability,however the role of cable can make up for the defect of rockbolts support. It has been found the highly prestressed strength bolting system adapts to the compound roof.

Application of ABAQUS in Surrounding Rock Stability Analysis of Shallow Large Cross-Section Tunnel

2015 ◽  
Vol 777 ◽  
pp. 8-12 ◽  
Author(s):  
Lin Zhen Cai ◽  
Cheng Liang Zhang
Keyword(s):  
Numerical Simulation ◽  
Rock Mass ◽  
Strong Support ◽  
Surrounding Rock ◽  
Tunnel Engineering ◽  
Tunnel Excavation ◽  
Rock Stability ◽  
Rock Bolting ◽  
Excavation Support ◽  
The Stability

HuJiaDi tunnel construction of Dai Gong highway is troublesome, the surrounding-rock mass give priority to full to strong weathering basalt, surrounding rock integrity is poor, weak self-stability of surrounding rock, and tunnel is prone to collapse. In order to reduce disturbance, taking advantage of the ability of rock mass, excavation adopt the method of "more steps, short footage and strong support". The excavation method using three steps excavation, The excavation footage is about 1.2 ~ 1.5 m; The surrounding rock bolting system still produce a large deformation after completion of the first support construction, it shows that the adopted support intensity cannot guarantee the stability of the tunnel engineering. Using ABAQUS to simulate tunnel excavation support, optimizing the support parameters of the tunnel, conducting comparative analysis with Monitoring and Measuring and numerical simulation results, it shows that the displacement - time curves have a certain consistency in numerical simulation of ABAQUS and Monitoring and Measuring.

Characteristic Law of Borehole Deformation Induced by the Temperature Change in the Surrounding Rock of Deep Coalbed Methane Well

2021 ◽  
pp. 1-18
Author(s):  
Xin Li ◽  
Jie Zhang ◽  
Cuinan Li ◽  
Weilin Chen ◽  
Jingbin He ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Coalbed Methane ◽  
Linear Equations ◽  
Surrounding Rock ◽  
Experimental Temperature ◽  
Borehole Stability ◽  
Fracture Angle ◽  
High Deformation ◽  
Rock Temperature ◽  
Primary Fracture

Abstract The borehole stability of the coalbed methane (CBM) well has always been vital in deep CBM exploration and development. The borehole instability of the deep CBM well is due to many complicated reasons. The change in the surrounding rock temperature is an important and easily overlooked factor among many reasons. In this research, we used methods that include experiment and numerical simulation to study the characteristic law of the borehole deformation induced by the changes in the surrounding rock temperature of deep CBM well. The experimental results of the stress–strain curves of five sets of experiments show that when the experimental temperature rises from 40 °C to 100 °C, the average stress when coal samples are broken gradually decreases from 81.09 MPa to 72.71 MPa. The proportion of plastic deformation in the entire deformation stage gradually increases from 7.8% to 25.7%. Moreover, the characteristics that some key mechanical parameters of coal samples change with the experimental temperature are fitted, and results show that as the experimental temperature rises from 40 °C to 100 °C, the compressive strength, elastic modulus, and main crack length of coal samples show a gradually decreasing trend. By contrast, the Pois-son's ratio and primary fracture angle show a gradually increasing trend. Moreover, the relativity of the linear equations obtained by fitting is all close to 1, which can accurately reflect the corresponding change trend. Numerical simulation results show that a high temperature of the surrounding rock of the deep CBM well results in a high range of stress concentration on the coal seam borehole and high deformation.

scholarly journals Surrounding Rock Movement of Steeply Dipping Coal Seam Using Backfill Mining

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Wenyu Lv ◽  
Kai Guo ◽  
Jianhao Yu ◽  
Xufeng Du ◽  
Kun Feng
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Surrounding Rock ◽  
Maximum Deflection ◽  
Coal Seams ◽  
Physical Similarity ◽  
Working Face ◽  
Rock Structure ◽  
Backfill Mining ◽  
The Stability

The movement of the overlying strata in steeply dipping coal seams is complex, and the deformation of roof rock beam is obvious. In general, the backfill mining method can improve the stability of the surrounding rock effectively. In this study, the 645 working face of the tested mine is used as a prototype to establish the mechanical model of the inclined roof beam using the sloping flexible shield support backfilling method in a steeply dipping coal seam, and the deflection equation is derived to obtain the roof damage structure and the maximum deflection position of the roof beam. Finally, numerical simulation and physical similarity simulation experiments are carried out to study the stability of the surrounding rock structure under backfilling mining in steeply dipping coal seams. The results show the following: (1) With the support of the gangue filling body, the inclined roof beam has smaller roof subsidence, and the maximum deflection position moves to the upper part of working face. (2) With the increase of the stope height, the stress and displacement field of the surrounding rock using the backfilling method show an asymmetrical distribution, the movement, deformation, and failure increase slowly, and the increase of the strain is relatively stable. Compared with the caving method, the range and degree of the surrounding rock disturbed by the mining stress are lower. The results of numerical simulation and physical similarity simulation experiment are generally consistent with the theoretically derived results. Overall, this study can provide theoretical basis for the safe and efficient production of steeply dipping coal seams.

Numerical Analysis for Bolt Length Based on the Stress Response of Anchorage Surrounding Rock

2012 ◽  
Vol 204-208 ◽  
pp. 4481-4485
Author(s):  
Bin Wang ◽  
Fu Jun Zhao ◽  
Wen Bin Peng
Keyword(s):  
Numerical Simulation ◽  
Stress Response ◽  
Numerical Analysis ◽  
Bearing Capacity ◽  
Distribution Curve ◽  
Surrounding Rock ◽  
Effective Length ◽  
Plastic Failure ◽  
Deep Rock ◽  
Peak Value

The current researches on bolt length are rarely concerned with self-bearing characteristics of anchorage surrounding rock，its stress response is seldom used to analyze the bolt effective length. Tangential stress σθ of surrounding rock is sensitive to mechanical variation of surrounding rock plastic failure fields. When surrounding rock bolted, the distribution curve of σθ presents internal and external peak values from the surface rock to the deep rock, which is verified by numerical simulation. Internal peak value of σθ curve increases with the bolt length, which means the bearing capacity of surrounding rock in plastic failure division is improved, correspondingly, external peak value decreases which shows the supporting behavior of the deep rock is weakened. The results of numerical simulations prove that there exists an effective value of bolt length. If bolt length beyond it, the bearing capacity of anchorage surrounding rock cannot be improved obviously.

Sign in / Sign up

Export Citation Format

Share Document