scholarly journals Extracting Sweetening and Bioactive Compounds From Stevia Rebaudiana Using Cellulase Enzyme

2021 ◽  
Vol 910 (1) ◽  
pp. 012022
Author(s):  
Dhia F. Al-Fekaiki ◽  
Basair A. Al-Temimi
Keyword(s):  
Bioactive Compounds ◽  
Phosphate Buffer Solution ◽  
Stevia Rebaudiana ◽  
Steviol Glycosides ◽  
Enzyme Extract ◽  
Buffer Solution ◽  
Solution Ph ◽  
E Coli ◽  
Sodium Phosphate Buffer ◽  
Sodium Phosphate Buffer Solution

Abstract This study was conducted to find out the sweetener and bioactive compounds in the Stevia plant’s enzyme extract and its antioxidant and antibacterial effect. The enzyme extract was used in a ratio of 1:15 (w: v) with the use of sodium phosphate buffer solution (pH=4) in an equal mixing ratio with the enzyme. Extraction was carried out at 55°C with a time of 25 minutes to extract and determine steviol glycosides using HPLC. Stevioside and Rebaudioside-A (5.101 and 3.027 mg/g) were obtained, respectively. The study showed that Stevia contains high amounts of phenols and flavonoids (83.052 and 71,765) mg/ml, respectively. The enzyme extract gave an antioxidant activity of 71.367% compared to BHT which gave an activity of 77.267%. It gave the highest inhibitory activity against Bacillus subtilis, which was 14 mm, followed by Staphylococcus aureus and E. coli. The bioactive compounds were diagnosed by GC-MS and contained important bioactive compounds such as Hydroxydehydrostevic acid (steviol), 1,2-Benzenediol, 4-Ethylcatechol, 9-Octadecenamide, (Z)-, Isosteviol methyl ester, gamma-Sitosterol.

scholarly journals Crosslinking Efficacy and Cytotoxicity of Genipin and Its Activated Form Prepared by Warming It in a Phosphate Buffer: A Comparative Study

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6600
Author(s):  
Takeya Kawamura ◽  
Shunji Yunoki ◽  
Yoshimi Ohyabu ◽  
Toshio Uraoka ◽  
Kazuaki Muramatsu
Keyword(s):  
Phosphate Buffer ◽  
Phosphate Buffer Solution ◽  
Mechanical Tests ◽  
Buffer Solution ◽  
Sodium Phosphate Buffer ◽  
In Situ Forming ◽  
Custom Made ◽  
Acute Cytotoxicity ◽  
Sodium Phosphate Buffer Solution

The aim of the present study was to compare the acute and cumulative cytotoxicity of intact (n-GE) and warmed genipin (w-GE), while investigating the differences in crosslinking capabilities of these two genipins by rheological and mechanical tests. The n-GE solution was prepared by dissolving genipin powder in a sodium phosphate buffer solution. The w-GE solution was prepared by warming the n-GE solution at 37 °C for 24 h. The mechanical tests for chitosan (CH)/genipin gels showed the crosslinking rate of w-GE was much greater than that of n-GE up until 6 h after preparation, whereas the degree of crosslinking of CH/n-GE gels became higher at 12 h. The ISO 10993-5 standard method, which is established specifically for evaluating cumulative cytotoxicity, determined equivalent IC50 for w-GE (0.173 mM) and n-GE (0.166 mM). On the other hand, custom-made cytotoxicity tests using a WST-8 assay after 1 h of cultivation showed that the acute cytotoxicity of w-GE was significantly higher than that of n-GE at concentrations between 0.1–5 mM. The acute cytotoxicity of w-GE should be taken into consideration in its practical uses, despite the fact that the much faster crosslinking of w-GE is useful as an effective cross linker for in-situ forming gels.

scholarly journals Investigation of guanidine hydrochloride induced unfolding of apolipoprotein A-IMilano

2002 ◽  
Vol 16 (3-4) ◽  
pp. 199-206 ◽  
Author(s):  
Malin Suurkuusk ◽  
Dan Hallén
Keyword(s):  
Phosphate Buffer ◽  
Sodium Phosphate ◽  
Guanidine Hydrochloride ◽  
Phosphate Buffer Solution ◽  
Buffer Solution ◽  
Unfolded Protein ◽  
Sodium Phosphate Buffer ◽  
Apolipoprotein A ◽  
Helical Content ◽  
Sodium Phosphate Buffer Solution

A guanidine hydrochloride (GuHCl) induced unfolding study of apolipoprotein A-IMilano(apo A-IM) has been performed. The unfolding was followed by circular dichroism (CD) measurements at 222 nm and by isothermal titration (ITC) calorimetry at 25°C. In the ITC experiments enthalpies of transfer were determined for apo A-IMfrom aqueous sodium phosphate buffer solution into solutions of different concentrations of GuHCl. The CD data and the ITC data give complementary and consistent results of the complex unfolding process. Analytical ultracentrifugation experiments were made on apo A-IMin sodium phosphate buffer and in 0.6 M GuHCl, respectively. Analyses of the obtained sedimentation velocity data show that apo A-IMis highly aggregated in sodium phosphate buffer. The aggregates are almost completely dissociated in 0.6 M GuHCl. Aggregation of the protein in sodium phosphate buffer solution induces an increase in α-helical content. The loss of α-helical secondary structural element of the protein upon dissociation of the aggregates destabilises the protein resulting in a low GuHCl concentration of unfolding, [GuHCl]m=1.1 M. The unfolded protein has a significant α-helical content at the unfolded state. From ITC- and CD data we suggest that increased binding of GuHCl to the unfolded protein results in a disruption of the residual secondary structure.

Detection of Hepatitis a Virus in Drinking Water by Enzyme -Immunoassay Using Ultracentrifugation for Virus Concentration

1985 ◽  
Vol 17 (10) ◽  
pp. 39-41 ◽  
Author(s):  
A. Schnattinger
Keyword(s):  
Membrane Filtration ◽  
Hepatitis A ◽  
Hepatitis A Virus ◽  
Solid Phase ◽  
Phosphate Buffer Solution ◽  
Enzyme Linked Immunosorbent Assay ◽  
Virus Concentration ◽  
Buffer Solution ◽  
Solution Ph ◽  
Two Stage

Ten litres of tapwater were seeded with 200 µl (8×108 HAV particles) of a commercial (Organon Teknika) suspension of hepatitis A virus. Following WALTER and RÜDIGER (1981), the contaminated tapwater was treated with a two-stage technique for concentration of viruses from solutions with low virus titers. The two-stage technique consists of aluminium hydroxideflocculation (200 mg/l Al2(SO4)3. 18 H2O, pH 5,4-5,6) as first stage, the second stage of a lysis of aluminium hydroxidegel with citric acid/sodium citrate-buffer (pH 4,7; 1 ml/l sample), separation of viruses from the lysate by ultracentrifugation and suspension in 1 ml phosphate buffer solution (pH 7,2). A commercial solid phase enzyme-linked immunosorbent assay (ELISA) was used for the detection of HAV. HAV was detecterl in the 10.000:1 concentrates, but not in the seeded 101 samples. Approximately 4×108 of the inoculated 8×108 HAV particles were found in the 1 ml concentrates. The efficiency of detection is about 50%, the virus concentration 5000-fold. Although the percentage loss of HAV in comparison with concentration by means of membrane filtration is similar, the ultracentrifugation method yields a larger sample/concentrate ratio, so that smaller amounts of HAV can be detected more efficiently because of the smaller end-volume.

Non-enzymatic determination of purine nucleotides using a carbon dot modified glassy carbon electrode

2019 ◽  
Vol 11 (30) ◽  
pp. 3866-3873 ◽  
Author(s):  
R. Karthikeyan ◽  
D. James Nelson ◽  
S. Abraham John
Keyword(s):  
Glassy Carbon ◽  
Low Cost ◽  
Phosphate Buffer Solution ◽  
Purine Nucleotides ◽  
Buffer Solution ◽  
Solution Ph ◽  
Carbon Dot ◽  
Enzymatic Determination ◽  
Sensitive Determination

Selective and sensitive determination of one of the purine nucleotides, inosine (INO) using a low cost carbon dot (CD) modified glassy carbon (GC) electrode in 0.2 M phosphate buffer solution (pH 7.2) was demonstrated in this paper.

scholarly journals Electro-Polymerized Titan Yellow Modified Carbon Paste Electrode for the Analysis of Curcumin

Surfaces ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 191-204
Author(s):  
Edwin S. D’Souza ◽  
Jamballi G. Manjunatha ◽  
Chenthattil Raril ◽  
Girish Tigari ◽  
Huligerepura J. Arpitha ◽  
...  
Keyword(s):  
Carbon Paste Electrode ◽  
Limit Of Detection ◽  
Phosphate Buffer Solution ◽  
Modified Carbon Paste Electrode ◽  
Carbon Paste ◽  
Buffer Solution ◽  
Solution Ph ◽  
Real Sample Analysis ◽  
Titan Yellow ◽  
Paste Electrode

A modest, efficient, and sensitive chemically modified electrode was fabricated for sensing curcumin (CRC) through an electrochemically polymerized titan yellow (TY) modified carbon paste electrode (PTYMCPE) in phosphate buffer solution (pH 7.0). Cyclic voltammetry (CV) linear sweep voltammetry (LSV) and differential pulse voltammetry (DPV) approaches were used for CRC detection. PTYMCPE interaction with CRC suggests that the electrode exhibits admirable electrochemical response as compared to bare carbon paste electrode (BCPE). Under the optimized circumstances, a linear response of the electrode was observed for CRC in the concentration range 2 × 10−6 M to 10 × 10−6 M with a limit of detection (LOD) of 10.94 × 10−7 M. Moreover, the effort explains that the PTYMCPE electrode has a hopeful approach for the electrochemical resolution of biologically significant compounds. Additionally, the proposed electrode has demonstrated many advantages such as easy preparation, elevated sensitivity, stability, and enhanced catalytic activity, and can be successfully applied in real sample analysis.

Controlled Release of Active Substance from Biodegradable Copolymer Matrix

2006 ◽  
Vol 510-511 ◽  
pp. 798-801
Author(s):  
Hyung Suk So ◽  
Hyun Chul Shin ◽  
Beom Suk Kim ◽  
Yeong Seok Yoo
Keyword(s):  
Methylene Blue ◽  
Active Substance ◽  
Phosphate Buffer Solution ◽  
Ultra Violet ◽  
Hydroxyl Groups ◽  
Buffer Solution ◽  
Solution Ph ◽  
Effective Discharge ◽  
Constant Rate ◽  
Long Time

The purpose of this study is to develop a new system to control effective discharge of active substances such as agricultural chemicals. To synthesize a naturally dissolvable polymer; ε-caprolactone and diglycolide were copolymerized with ethylene glycol as an initiator to produce macrodiol. As macrodiol has hydroxyl groups in both ends, they are modified with methacryloyl chloride for photochemical networking. After standard macromonomer produced by this procedure was physically mixed with methylene blue, it was networked with ultra-violet rays to be filmed. This film is naturally dissolvable and hydrolytic. As a result of hydrolytic test with a crosslinked structure of 10 % methylene blue, it decreased by 9 % for seven weeks in 37 °C phosphate buffer solution (pH = 7). Thus, we verified that active substance can be discharged from a crosslinked structure for a long time at a constant rate under room temperature.

Reduction of Escherichia coli O157:H7 Counts on Whole Fresh Apples by Treatment with Sanitizers

2000 ◽  
Vol 63 (6) ◽  
pp. 703-708 ◽  
Author(s):  
MARCY A. WISNIEWSKY ◽  
BONITA A. GLATZ ◽  
MARK L. GLEASON ◽  
CHERYLL A. REITMEIER
Keyword(s):  
Escherichia Coli ◽  
Chlorine Dioxide ◽  
Phosphate Buffer ◽  
Phosphate Buffer Solution ◽  
Escherichia Coli O157 ◽  
Peroxyacetic Acid ◽  
Water Control ◽  
Buffer Solution ◽  
E Coli ◽  
Log Reduction

The objectives of this study were to determine if washing of whole apples with solutions of three different sanitizers (peroxyacetic acid, chlorine dioxide, or a chlorine-phosphate buffer solution) could reduce a contaminating nonpathogenic Escherichia coli O157:H7 population by 5 logs and at what sanitizer concentration and wash time such a reduction could be achieved. Sanitizers were tested at 1, 2, 4, 8, and 16 times the manufacturer's recommended concentration at wash times of 5, 10, and 15 min. Whole, sound Braeburn apples were inoculated with approximately 1 × 108 or 7 × 106 CFU per apple, stored for 24 h, then washed with sterile water (control) or with sanitizers for the prescribed time. Recovered bacteria were enumerated on trypticase soy agar. Washing with water alone reduced the recoverable population by almost 2 logs from the starting population; this can be attributed to physical removal of organisms from the apple surface. No sanitizer, when used at the recommended concentration, reduced the recovered E. coli population by 5 logs under the test conditions. The most effective sanitizer, peroxyacetic acid, achieved a 5-log reduction when used at 2.1 to 14 times its recommended concentration, depending on the length of the wash time. The chlorine-phosphate buffer solution reduced the population by 5 logs when used at 3 to 15 times its recommended concentration, depending on wash time. At no concentration or wash time tested did chlorine dioxide achieve the 5-log reduction.

OPTIMISATION AND VALIDATION OF HPLC METHOD FOR SIMULTANEOUS QUANTIFICATION OF RIFAMPICIN, ISONIAZID, PYRAZINAMIDE, AND ETHAMBUTOL HYDROCHLORIDE IN ANTI-TUBERCULOSIS 4-FDC TABLET

2015 ◽  
Vol 77 (1) ◽  
Author(s):  
Sholihul Khoiri ◽  
Sudibyo Martono ◽  
Abdul Rohman
Keyword(s):  
High Performance ◽  
Phosphate Buffer Solution ◽  
Gradient Elution ◽  
Hplc Method ◽  
Fixed Dose ◽  
Buffer Solution ◽  
Solution Ph ◽  
Combination Tablet ◽  
Simultaneous Quantification ◽  
Dose Combination

High-performance liquid chromatography (HPLC) method has been developed and validated for the simultaneous quantification of four components, namely rifampicin (RIF), isoniazid (INH), pyrazinamide (PYR), and ethambutol hydrochloride (ETM), contained in anti-tuberculosis drugs in fixed dose combination tablet (4-FDC). In order to increase the sensitivity of EMB, the pre-column derivatization technique with phenethyl isocyanate (PEIC) was carried out. The separation was accomplished using Waters Symmetry C8 (250× 4.6 mm i.d.; 5 μm) at 30oC. The mobile phase used was a mixture of acetonitrile and 20 mM phosphate buffer solution (pH 6.8) containing triethylamine and delivered at 1.5 mL/minute using gradient elution. TheUV detector was set at 210 nm. The method was validated in terms of selectivity, linearity, accuracy, precision, detection limit, quantification limit, and robustness according to International Conference on Harmanization (ICH). The optimized method is succcesfully used for quantitative analysis of RIF, INH, PYR and ETM in 4-FDC tablets. The level of these drugs in 4-FDC tablets were in accordance to that specified in Indonesian pharmacopeia.

The Study of Albumin Release from Silica/Albumin as a Potential Drug Delivery Carrier

2014 ◽  
Vol 69 (5) ◽  
Author(s):  
Shafiyah Pondi ◽  
Jon Efendi ◽  
Ho Chin Siong ◽  
Lai Sin Yuan ◽  
Sheela Chandren ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Fumed Silica ◽  
In Vitro Release ◽  
Phosphate Buffer Solution ◽  
Buffer Solution ◽  
Solution Ph ◽  
Drug Delivery Carrier ◽  
High Interaction ◽  
Uv Visible

The drug-delivery field has been an attractive as well as challenging area for research. With the emerging of new formulated drugs and pharmaceutical compounds, development of good drug-delivery system (DDS) is crucially required. This study aims to utilize albumin as the drug template in silica/albumin/drug (S/A/D) system. Prior to designing this system, the interaction between silica and albumin was investigated. It is hypothesized that high interaction between silica and albumin may result in slower drug release over time, which is preferred for a good DDS. Silica and albumin (S/A) materials were prepared by using fumed silica and tetraethyl orthosilicate (TEOS) as the silica precursors. Three different S/A samples were prepared; fumed silica with albumin (FS/A), fumed silica with pre-treated albumin by sodium borohydrate (FS/A-N), and silica sol (TEOS) with albumin (SS/A). In-vitro release of albumin in phosphate buffer solution (pH 7) was carried out to examine the interaction between albumin and silica. The concentration of albumin was detected at 280 nm by UV-visible spectrophotometer. All samples were characterized by diffuse reflectance-UV-visible spectrophotometer (DR-UV), Fourier transform infrared spectrophotometer (FTIR) dan thermogravimetric-differential thermal analysis (TG-DTA). DR-UV results show that SS/A exhibited the lowest absorption intensity at 280 nm, which indicates better interaction between silica and albumin. This result was supported by the presence of Si-O stretching band of silanol at 952 cm-1 from the FTIR spectrum. Release study of albumin demonstrated that the release of albumin from SS/A was slowest compared to those of FS/A and FS/A-N. 

Sign in / Sign up

Export Citation Format

Share Document