scholarly journals Application of oxyfluorfen and pendimethalin to control weeds on soybean plantation

2022 ◽  
Vol 951 (1) ◽  
pp. 012066
Author(s):  
H Hasanuddin ◽  
G Erida ◽  
S Hafsah ◽  
A Marliah ◽  
Y Agustiawan ◽  
...  

Abstract The appearance of weeds on crops has led to the significant loss of crop yield. Therefore, chemical control with herbicides has been an important tool for rapid and efficient weed management in crops. The objective of this study was to evaluate the effect of herbicides oxyfluorfen and pendimethalin against weeds on soybean plantation. This research employed Randomized Completely Block Design (RCBD) Factorial with 2 factors. The first factor was the type of herbicides: oxyfluorfen and pendimethalin. The second factor was herbicide doses: 0, 500, 1000, 1500 and 2000 g a.i ha-1, applied on soybean at 1 day after planting (DAP). The percentage of weed control, percentage of weed coverage, weed species, weed population, and weed dry weight were observed at 3, 5, 7 and 9 weeks after planting (WAP). The results revealed that different types and doses of herbicide applied has affected the percentage of weed control, percentage of weed coverage weed species and weed dry weight.

2021 ◽  
Vol 38 (1) ◽  
pp. 61-67
Author(s):  
A.I. Woghiren ◽  
R. O., Awodoyin ◽  
C.I. Antiabong ◽  
E.N. Ngonadi ◽  
O.R. Jeminiwa ◽  
...  

Weed interference is a major constraint in maize cultivation. Living mulch as an alternative weed control strategy has been established to be environmentally safe but has not been widely used in maize cultivation. The aim of this research was to evaluate the weed management attributes of Vigna unguiculata in maize cropping. A field study was carried out in the crop garden of the Department of Crop Protection and Environmental Biology, University of Ibadan, Nigeria. The treatments were maize interplanted with Cowpea at 20,000 (M1), 30,000 (M2), 40,000 (M3) plants/hectare, hoe weeding (M4), weedy check (M5) and Primextra-2.5 L/ha (M6). The treatments were arranged in randomized complete block design, each replicated four times. Weed Dry Weight (WDW) and Weed Control Efficiency–WCE (%) were calculated following standardized methods. Data were analysed using descriptive statistics and ANOVA at α0.05. The treatment plots were dominated by weed species in the Asteraceae, Fabaceae and Poaceae families. The M5 accounted for the highest WDW (126.30 g). The WCE was highest in M3 (94.8%) and least in M5 (66.4%). Maize and cowpea interplant at 40,000 plants/hectare suppressed weed. Hence, cowpea is an ideal weed suppressant and can be inter-planted as a cover crop in maize cropping systems.


2014 ◽  
Vol 32 (4) ◽  
pp. 817-825 ◽  
Author(s):  
B.A.B. Martins ◽  
P.J. Christoffoleti

The weed Borreria densiflora is a management issue in soybean and sugarcane crops from North and Northeastern Brazil. Knowledge upon chemical control of B. densiflora contributes to the integrated management of this weed species, especially when active ingredient options become reduced due to the selection of herbicide resistant or tolerant weed species. Experiments in pre- and post-emergence of B. densiflora were conducted in greenhouse, in a randomized block design and four replications. In pre-emergence, the dose-response curve methodology was used and 7 herbicides were tested. In post-emergence, 9 herbicides at the recommended rate and 4 herbicide mixtures were tested. For pre and post-emergence conditions, evaluations were conducted at 60 and 21 days after treatment (DAT), respectively, and the variables analyzed were weed control and dry weight (%). The results showed options of pre-emergent herbicides that can be used for controlling B. densiflora, especially in sugarcane, where chemical weed control is mainly based on pre-emergent applications. In the current glyphosate resistance scenario, one should consider the use of pre-emergent herbicides within an integrated management of B. densiflora. For satisfactory post-emergence control, B. densiflora plants should be sprayed at the phenological stage of up to three pairs of leaves. Herbicide mixtures have been and will continue to be an important tool in chemical weed management, broadening the spectrum of weed control, while diversifying herbicide mechanisms of action, which helps to prevent or delay the appearance of herbicide resistance.


2020 ◽  
Vol 57 (3) ◽  
pp. 199-210
Author(s):  
Rajib Kundu ◽  
Mousumi Mondal ◽  
Sourav Garai ◽  
Ramyajit Mondal ◽  
Ratneswar Poddar

Field experiments were conducted at research farm of Bidhan Chandra Krishi Viswavidyalaya, Kalyani, West Bengal, India (22°97' N latitude and 88°44' E longitude, 9.75 m above mean sea level) under natural weed infestations in boro season rice (nursery bed as well as main field) during 2017-18 and 2018-19 to evaluate the herbicidal effects on weed floras, yield, non-target soil organisms to optimize the herbicide use for sustainable rice-production. Seven weed control treatments including three doses of bispyribac-sodium 10% SC (150,200, and 250 ml ha-1), two doses of fenoxaprop-p-ethyl 9.3% EC (500 and 625 ml ha-1), one weed free and weedy check were laid out in a randomized complete block design, replicated thrice. Among the tested herbicides, bispyribac-sodium with its highest dose (250 ml ha-1) resulted in maximum weed control efficiency, treatment efficiency index and crop resistance index irrespective of weed species and dates of observation in both nursery as well as main field. Similar treatment also revealed maximum grain yield (5.20 t ha-1), which was 38.38% higher than control, closely followed by Fenoxaprop-p-ethyl (625 ml ha-1) had high efficacy against grasses, sedge and broadleaf weed flora. Maximum net return (Rs. 48765 ha-1) and benefit cost ratio (1.72) were obtained from the treatment which received bispyribac-sodium @ 250 ml ha-1. Based on overall performance, the bispyribac-sodium (250 ml ha-1) may be considered as the best herbicide treatment for weed management in transplanted rice as well as nursery bed.


2021 ◽  
Vol 27 (1) ◽  
pp. 51-66
Author(s):  
Haseeb Ahmad

An experiment entitled: Maize yield as affected by methods of tillage and weed control methods was conducted at Agronomy Research Farms, The University of Agriculture Peshawar during summer 2016. The study was conducted in randomized complete block design (RCBD) with split plot arrangement having four replications. Tillage practices 1) Chisel plough + rotavator 2) Mouldboard plough + rotavator 3) Cultivator + rotavator and 4) Rotavator were assigned to main plots. Weed management practices included 1) Control, 2) Hoeing 15 days after sowing 3) Hoeing 15 and 30 days after sowing 4) Hoeing 15, 30 and 45 days after sowing, and 4) Herbicide (nicosulfuron) were kept into the subplots. The results revealed that chisel plough + rotavator has significantly reduced weeds m-2 (122, 101 and 125 weeds m-2), weeds fresh weight (19.73 g m-2, 116.35 g m-2 and 252.56 g m-2) and weeds dry weight (6.83 g m-2, 38.69 g m-2 and 80.61 g m-2) at 30, 45 and 60 days after sowing, respectively. The operation of chisel plough + rotavator has produced tallest plants (221.22 cm) with maximum grain rows ear-1 (16), grain yield (3586 kg ha-1) and shelling percentage (78.14%). Among weed control methods, hoeing 15, 30 and 45 days after sowing revealed maximum plant height (226.41 cm), grain rows ear-1 (16), grain yield (3604 kg ha-1) and shelling percentage (79.11%). All weed control methods have showed significant reduction in weeds m-2, weeds fresh weight and weeds dry weight. Interaction was also found significant for weeds m-2 at 60 DAS and grain yield of maize. Lowest weeds (56 weeds m-2) at 60 DAS and highest grain yield (4569 kg ha-1) was recorded when seedbed was prepared with chisel plough + rotavator with 3 hoeings (hoeing 15, 30 and 45 days after sowing). It is concluded that treatment of chisel plough + rotavator and hoeing 15, 30 and 45 days after sowing has significantly produced maximum grain yield of maize crop.


2002 ◽  
Vol 50 (4) ◽  
pp. 441-445
Author(s):  
J. Pandey ◽  
K. A. Gopinath ◽  
A. K. Verma

The results obtained showed that there was severe competition between wheat and the predominant weed species Phalaris minor, Avena ludoviciana and Melilotus indica. Competition by other weed species was normal. The maximum reduction in grain and straw yields due to weed competition was 34.8% and 43.7%, respectively. Weed control treatments lowered the weed population and weed biomass accumulation and boosted up the crop yield. A significant reduction in the weed population and weed dry weight was observed with increasing doses of both atrazine and metribuzin. Metribuzin at 200 g ha-1 killed all the plants of M. indica and gave excellent control of both P. minor (98%) and A. ludoviciana (89%). Atrazine at higher doses had an almost similar effect on P. minor, A. ludoviciana and M. indica with 83-87% control. Pendimethalin gave good control of P. minor and M. indica (75-83%) but poor control of A. ludoviciana (55%). The highest yield was recorded in hand weeding which was significantly superior to all other treatments. Metribuzin at 100 g ha-1 was the next best treatment, and this rate was superior to the higher doses. Pendimethalin and atrazine also brought about a marked increase in the crop yield. Higher doses of atrazine and metribuzin had a phytotoxic effect on the crop, reducing the number of productive tillers and finally lowering the crop yield, despite their excellent control of dominant weed species.


2018 ◽  
Vol 36 (0) ◽  
Author(s):  
M.H. SIDDIQUI ◽  
S. KHALID ◽  
M. SHEHZAD ◽  
Z.A. SHAH ◽  
A. AHMAD

ABSTRACT: Weeds have indirect effects on crop plants. Crop development is affected by allelopathy from certain weed species. Allelochemicals from allelopathic weeds can disturb the root and shoot growth of emerging crop seedlings, as well as cause several other types of damage. A study was carried out to investigate the allelopathic potential of Parthenium hysterophorus for weed response in soybean. The experiment was laid out in Randomized Complete Block Design (RCBD) with split plot arrangements and replicated thrice. Sowing methods (broadcast and line sowing) were kept in the main plot and mulching treatments (surface mulching and soil incorporation) were kept in the sub-plots. Mulching of Parthenium hysterophorus was applied at the rate of 1.0 t ha-1, 2.5 t ha-1, 5 t ha-1 with control (no parthenium). Manual weed control was also used as treatments. The results revealed that significantly higher shoot length, shoot fresh weight, shoot dry weight, root length, root fresh weigh, root dry weight, number of nodules per plant, nodules fresh and dry weight, number of branches, number of pods per plant, thousand seed weight biological yield, economic yield, dry matter yield and harvest index were recorded with the soil incorporation of Parthenium herbage at the rate of 2.5 t ha-1. Maximum weed density and weed dry biomass were recorded in control plots while weed control efficiency was seen greater in plots where Parthenium herbage was applied to surface at the rate of 5 t ha-1. The results suggested that the use of Parthenium hysterophorus herbage mulching can reduce infestation of weeds by its allelopathic effects and increase the yield of soybean under sub-humid agro-climatic conditions.


2018 ◽  
Vol 28 (4) ◽  
pp. 253-261
Author(s):  
S Ferdousi ◽  
MR Uddin ◽  
M Begum ◽  
UK Sarker ◽  
MN Hossain ◽  
...  

Allelopathic potentiality of crop residues may be helpful to minimize the serious problems in the present agricultural production such as environmental pollution, unsafe products, human health concerns, depletion of crop diversity, soil sickness and reduction of crop productivity. In this phenomenon an experiment was conducted at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh during June to November, 2015 to evaluate the effect of crop residues of wheat on weed management and crop performance of T. Aman rice. The experiment consisted of three varieties (cv. BRRI dhan32, BRRI dhan33 and BRRI dhan49) and five different treatments (viz. no crop residues, wheat crop residues @ 0.5, 1.0, 1.5 and 2.0 t ha-1). The experiment was laid out in a randomized complete block design with three replications. Five weed species belonging to three families infested the experimental plots. Weed population, weed dry weight and percent inhibition of weed were significantly influenced by wheat crop residues and cultivar. The maximum weed growth was noticed where no crop residues was incorporated and the minimum was found where @ 2.0 tha-1 wheat crop residues was incorporated. The grain yield as well as the other yield contributing characters produced in BRRI dhan49 was the highest among the studied varieties. The highest percent inhibition of 75.32, 58.24, 72.60, 57.45 and 82.24 was in Shama, Panishapla, Pani chaise, Panikachu and Susnishak, respectively which was caused by the application of wheat crop residues @ 2 t ha-1. The highest loss of grain yield was obtained where no crop residues were incorporated. The highest numbers of tillers hill-1, numbers of grains panicle-1, 1000-grain weight, grain yield, straw yield were observed where wheat crop residues were incorporated @ 2.0 t ha-1. The results of this study indicate that different amount of wheat crop residues showed potential activity to suppress weed growth.Progressive Agriculture 28 (4): 253-261, 2017


2016 ◽  
Vol 8 (4) ◽  
pp. 1947-1952
Author(s):  
R. B. Negalur ◽  
A. S. Halepyati

Field experiment on effect of different weed management practices in machine transplanted rice (Oryza sativa L.) was conducted at ARS, Gangavathi, University of Agricultural Sciences, Raichur, Karnataka during kharif, 2012 and 2013 under irrigated condition in clay soil. Pooled mean indicated that, application of butachlor 50 EC fb passing of power operated low land rice weeder twice at 20 and 30 DAT with hand weeding in intra row space recorded significantly lower grassy weed population and dry weight at 40, 60 DAT and at harvest (1.98, 2.47, 2.97/0.25 m2 and 1.00, 1.20, 1.47 g /0.25 m2, respectively), sedge weed population and dry weight (2.61, 3.21, 3.52 /0.25 m2 and 1.19, 1.48, 1.71 g /0.25 m2, respectively) and broad leaved weed population and dry weight (1.68, 2.10, 2.52 / 0.25 m2 and 0.91, 1.06, 1.28 g /0.25 m2, respectively). Significantly higher WCE (87.53%), lower weed index (3.11 %), grain and straw yield (5160 and 6482 kg ha-1, respectively), gross and net returns (Rs. 92,212 and 50,410 ha-1, respectively), and B:C of 2.22 over unweeded check. Hence, application of butachlor 50 EC fb passing of power operated low land rice weeder at 20 and 30 DAT with hand weeding in intra row space was found to be the best weed control method as it recorded higher B:C. Present conventional manual weeding is which is not advantageous as it is costlier, time consuming and labour may trample and damage rice seedlings. Mechanical weeder and sequential application can overcome the same.


2021 ◽  
Vol 27 (1) ◽  
Author(s):  
Bhupesh Kumar Mishra ◽  
Santosh Pandey

The different weed control methods (two hand weeding at 25 and 45 days after sowing (DAS) and one hand weeding at 25 DAS along with unweeded control ), organic sources of nitrogen (vermicompost, poultry manure, city manure and FYM) and their interaction were compared for their efficiency on various weed species and yield of wheat. Two hand weeding (W2) gave significantly maximum weed control. This was followed by one hand weeding at 25 DAS and control. These weed control methods significantly enhanced the yield and yield components of wheat. Among organic sources of nitrogen vermicompost (M1) recorded minimum weed density, weed dry weight and maximum yield, followed by poultry manure, city manure and FYM.


2018 ◽  
Vol 5 (01) ◽  
Author(s):  
MUKESH KUMAR ◽  
A. K. GHORAI ◽  
USSREE K. NANDY ◽  
S MITRA K. GHORAI ◽  
D. K. KUNDU

A field experiment was conducted to find out suitable weed management practice for control of broad spectrum weeds in jute during 2015 and 2016. Seven weed management practices viz., T : 1 Farmers practices , T : Stale seed bed (SSB) + glyphosate 41% SL 1.25 kg/ha, T : SSB+glyphosate 1.75 2 3 kg/ha, T : SSB + glyphosate 1.25 kg/ha + pretilachlor 50% EC 1.0 kg/ha, T : SSB +glyphosate 4 5 1.75kg/ha + pretilachlor 1.0 kg/ha, T : SSB +glyphosate 1.25 kg/ha+butachlor 50 % EC 1.0 kg/ha and 6 T : SSB + glyphosate 1.75 kg/ha + butachlor1.0 kg/ha were tested in randomised block design (RBD) 7 with three replication. Cyperus rotundus was dominant weed species with 60-75 % of relative density in experimental field. SSB + glyphosate 1.75 kg/ha + pretilachlor 1.0 kg/ha effectively controlled density and dry weight of Cyperus rotundus, grass weeds (Echinochloa colonum and Eleusine indica), broad leaved weeds (Physalis minima, and Trianthema portulacastrum) compared to farmers' practices. SSB + glyphosate 1.75 kg/ha + pretilachlor 1.0 kg/ha also recorded the highest plant height (293 cm and 335 cm), basal diameter (2.14 and 2.19 cm) and fibre yield (34.9 and 38.9 q/ha) of jute during 2015 and 2016. This treatment also recorded the highest net income (Rs 54182 and 75687/ha) and benefit-cost ratio (1.23 and 1.46) in jute cultivation during 2015 and 2016, Therefore, SSB with glyphosate 1.75 kg/ha +pretilachlor 1.0 kg/ha may be practiced for effective weeds control specially Cyperus rotundus, higher productivity and income in jute cultivation.


Sign in / Sign up

Export Citation Format

Share Document