scholarly journals Organic acid-assisted catalytic wet torrefaction of oil palm trunks (OPT)

2021 ◽  
Vol 1195 (1) ◽  
pp. 012024
Author(s):  
M Soh ◽  
J J Chew ◽  
J Sunarso

Abstract Oil palm trunks (OPT) are attractive bio-fuel sources given their abundant availability. Nonetheless, the inherent properties of these biomass can lead to their inefficient use as bio-fuel directly. This work utilizes four organic acids (i.e., acetic, formic, levulinic, and citric acid) as catalyst in wet torrefaction to enhance the fuel properties of OPT hydrochar. In this study, the effects of different catalysts, catalyst concentrations, and residence times on the fuel properties of OPT hydrochar are analyzed. To study the effect of residence time, 0.2M of acid concentration was used for all four acids at 220 °C for 3 hr and 24 hr. Meanwhile, study on the effect of catalyst concentration was performed at 220 °C for 24 hr at 0.2M and 1.0M for all four acids. Increasing the residence time decreased the solid yield of OPT hydrochar treated in deionized water, acetic, formic, and levulinic acid, while wet torrefaction in citric acid results in close solid yield value in both residence time. The energy yield was observed to decrease in all liquid medium with increasing residence time except for formic acid and citric acid. On the other hand, increasing the acid concentration increased the OPT hydrochar solid yield in all acids except formic acid and the highest energy yield of 77.08% was obtained from wet torrefaction in 1.0M of citric acid at 220 °C for 24 hr. In summary, citric acid is an environmentally friendly acid to be used as catalyst to enhance the fuel properties of OPT hydrochar. Further study on the reaction mechanisms that governs such fuel properties enhancement with citric acid is warranted.

REAKTOR ◽  
2017 ◽  
Vol 16 (4) ◽  
pp. 161 ◽  
Author(s):  
Sri Hidayati ◽  
Ahmad Sapta Zuidar ◽  
Ahmad Fahreza

ABSTRACT Empty oil-palm bunches (EOPB) contains more enough cellulose so that it can be made as an alternative pulp production.  One of the process of pulp production which friendly environment is by using acetate acid and formic acid called by formacell process.  The aims of the research is to got optimation models of formic acid concentration, HCl concentration and cooking duration for the EFB pulp production.  The optimum result of the EOPB pulp production were 75% of cellulose, 8% of hemiselulosa, 10% of  lignin, and 80% of yield with the optimum concentration 20% of formic acid, 0,5% of HCl, and 2 hour of cooking duration.   Keyword : pulp formacell, EFB, RSM.   ABSTRAK Tandan kosong kelapa sawit (TKKS) mengandung kadar selulosa yang cukup tinggi sehingga dapat dijadikan sebagai bahan baku alternatif produksi pulp.  Salah satu proses produksi pulp ramah lingkungan yaitu dengan menggunakan campuran pelarut asam asetat dan asam formiat sebagai bahan pemasak yang disebut proses formacell.  Tujuan dari penelitian ini untuk mendapatkan model optimasi dari konsentrasi asam formiat, konsentrasi HCl dan lama pemasakan untuk produksi pulp TKKS.  Konsentrasi pemasakan optimum terjadi pada konsentrasi asam formiat 20%, konsentrasi HCl 0,5%, dan lama pemasakan selama 2 jam dengan hasil optimum untuk produksi pulp TKKS yaitu 75 % selulosa, 8 % hemiselulosa, 10% lignin, dan 80% rendemen.   Kata kunci: pulp formacell, TKKS, RSM.    


2021 ◽  
Author(s):  
Syazmi Zul Arif Hakimi Saadon ◽  
Noridah Osman ◽  
Moviin Damodaran ◽  
Shan En Liew

Abstract Interest in torrefaction has improved along the recent years and it has been studied extensively as a mean of preparing solid fuels. Biomass to be considered as a renewable source of energy must endeavor improvement continuously and where it is more sustainable going forward in which can come from waste product, wild and cultivated plant. The aim of this study is to investigate the effect of temperature and residence time of wild Napier grass and Oil palm petiole from waste. The torrefied samples were derived by pyrolysis reactor mimicking torrefaction procedure. The temperature parameter ranges between 220 and 300 ℃ while residence time parameter is from 10 minutes to 50 minutes of reaction. It was found that as temperature and time increasing, moisture content and amount of O and H atoms decreases as well as both mass and energy yield, but calorific value and the energy density increase along with both two parameters. Between the two parameters, the temperature variation shows more significant changes to the torrefied samples as compared time. The optimized temperature and time are found to be 260 ℃ and 30 minutes, respectively. Remarkably, the usage of pyrolyzer as torrefaction reaction has proved to be a good option since they share similar characteristics while can also produce product with similar properties reflecting torrefaction process.


Inventions ◽  
2021 ◽  
Vol 6 (3) ◽  
pp. 50
Author(s):  
Silvia Lazăr (Mistrianu) ◽  
Oana Emilia Constantin ◽  
Nicoleta Stănciuc ◽  
Iuliana Aprodu ◽  
Constantin Croitoru ◽  
...  

(1) Background: This study is designed to extract the bioactive compounds from beetroot peel for future use in the food industry. (2) Methods: Spectrophotometry techniques analyzed the effect of conventional solvent extraction on betalains and polyphenolic compounds from beetroot peels. Several treatments by varying for factors (ethanol and citric acid concentration, temperature, and time) were applied to the beetroot peel samples. A Central Composite Design (CCD) has been used to investigate the effect of the extraction parameters on the extraction steps and optimize the betalains and total polyphenols extraction from beetroot. A quadratic model was suggested for all the parameters analyzed and used. (3) Results: The maximum and minimum variables investigated in the experimental plan in the coded form are citric acid concentration (0.10–1.5%), ethanol concentration (10–50%), operating temperature (20–60 °C), and extraction time (15–50 min). The experimental design revealed variation in betalain content ranging from 0.29 to 1.44 mg/g DW, and the yield of polyphenolic varied from 1.64 to 2.74 mg/g DW. The optimized conditions for the maximum recovery of betalains and phenols were citric acid concentration 1.5%, ethanol concentration 50%, temperature 52.52 °C, and extraction time 49.9 min. (4) Conclusions: Overall, it can be noted that the extraction process can be improved by adjusting operating variables in order to maximize the model responses.


2021 ◽  
Vol 11 (4) ◽  
pp. 1799
Author(s):  
Claudio Cameselle ◽  
Susana Gouveia ◽  
Adrian Cabo

The electrokinetic remediation of an agricultural soil contaminated with heavy metals was studied using organic acids as facilitating agents. The unenhanced electrokinetic treatment using deionized water as processing fluid did not show any significant mobilization and removal of heavy metals due to the low solubilization of metals and precipitation at high pH conditions close to the cathode. EDTA and citric acid 0.1 M were used as facilitating agents to favor the dissolution and transportation of metals. The organic acids were added to the catholyte and penetrated into the soil specimen by electromigration. EDTA formed negatively charged complexes. Citric acid formed neutral metal complexes in the soil pH conditions (pH = 2–4). Citric acid was much more effective in the dissolution and transportation out of the soil specimen of complexed metals. In order to enhance the removal of metals, the concentration of citric acid was increased up to 0.5 M, resulting in the removal of 78.7% of Cd, 78.6% of Co, 72.5% of Cu, 73.3% of Zn, 11.8% of Cr and 9.8% of Pb.


2012 ◽  
Vol 2 (1) ◽  
Author(s):  
Zhi-Li Wang ◽  
Jun-Min Yan ◽  
Hong-Li Wang ◽  
Yun Ping ◽  
Qing Jiang

2021 ◽  
Vol 41 (1) ◽  
pp. 60-67
Author(s):  
E. K. Ndelekwute ◽  
H. O. Uzegbu ◽  
K. U. Amaefule ◽  
C. O. Okereke ◽  
B. I. Umoh

A Six week study was carried out to investigate effect of different organic acids (OAs) fed through drinking water on carcass yield and internal organs weight of broiler chickens. The OAs were acetic acid (AA) butyric acid (BA), citric acid (CA) and formic acid (FA). One hundred and fifty (150) day old AborAcre-plus chicks were used. There were five treatments. Treatment 1 which served as control (CON) consumed water with no organic acid, while treatments 2,3, 4 and5 respectively were offered drinking water treated with 0.25% acetic acid (AA), butyric acid (BA), citric acid (CA) and formic acid (FA). Each treatment was replicated three times each having 10 birds arranged in completely randomized design (CRD). Feed and water were offered ad libitum. Results showed that dressed carcass weight and breast weight were improved by all the organic acids. While only AA positively influenced the thigh weight, all the OAs drinking water fed resulted to smaller drumstick compared to the CON. Feeding of AA, BA and FA through drinking water increased (PSO.05) deposition of abdominal fat. Weight of pancreas, small intestine, caecum and large intestine was significantly (P<0.05) higher in CON. The gall bladder was significantly (P<0.05) bigger in all the OA groups. Conclusively, OAs could be fed through the drinking water for improved percentage carcass yield, breast meat and larger gall bladder and invariably bile volume


Sign in / Sign up

Export Citation Format

Share Document