scholarly journals Effect of the Retarder for Grouting Materials in Pavement Reinforcement

Author(s):  
Chen Nan
2020 ◽  
Vol 2020 (22) ◽  
pp. 63-78
Author(s):  
Andrii Dmytrychenko ◽  
◽  
Igor Gameliak ◽  
Mykola Bykovets ◽  
Vasyl Nahaichuk ◽  
...  

2021 ◽  
Vol 40 (1) ◽  
pp. 151-170
Author(s):  
Weijing Yao ◽  
Happiness Lyimo ◽  
Jianyong Pang

Abstract To study the active heat insulation roadways of high-temperature mines considering thermal insulation and injection, a high-temperature −965 m return air roadway of Zhujidong Coal Mine (Anhui Province, China) is selected as a prototype. The ANSYS numerical simulation method is used for the sensitivity analysis of heat insulation grouting layers with different thermal conductivities and zone ranges and heat insulation spray layers with different thermal conductivities and thicknesses; thus, their effects on the heat-adjusting zone radius, surrounding rock temperature field, and wall temperature are studied. The results show that the tunneling head temperature of the Zhujidong Mine is >27°C all year round, consequently causing serious heat damage. The heat insulation circle formed by thermal insulation spraying and grouting can effectively alleviate the disturbance of roadway airflow to the surrounding rock temperature field, thereby significantly reducing the heat-adjusting zone radius and wall temperature. The decrease in the thermal conductivities of the grouting and spray layers, expansion of the grouting layer zone, and increase in the spray layer thickness help effectively reduce the heat-adjusting zone radius and wall temperature. This trend decreases significantly with the ventilation time. A sensitivity analysis shows that the use of spraying and grouting materials of low thermal conductivity for thermal insulation is a primary factor in determining the temperature field distribution, while the range of the grouting layer zone and the spray layer thickness are secondary factors. The influence of the increased surrounding rock radial depth and ventilation time is negligible. Thus, the application of thermal insulation spraying and grouting is essential for the thermal environment control of mine roadways. Furthermore, the research and development of new spraying and grouting materials with good thermal insulation capabilities should be considered.


2019 ◽  
Vol 37 (4) ◽  
pp. 3329-3342
Author(s):  
Zeng-qiang Yang ◽  
Chang Liu ◽  
Yun Dong ◽  
Lin-ming Dou ◽  
Jing-ke Wu

Materials ◽  
2013 ◽  
Vol 6 (12) ◽  
pp. 5713-5725 ◽  
Author(s):  
Daehyeon Kim ◽  
Sinkyu Jung ◽  
Kyungsub Cha
Keyword(s):  

2021 ◽  
pp. 1-44
Author(s):  
Yunxiao Liu ◽  
Jiahang Zhang ◽  
Yinyin Chi

In this study, three different diameters of multi-walled carbon nanotubes (MWCNTs) dispersed by polyvinyl pyrrolidone (PVP) were used to reinforce superfine cement grouting materials. The effect of MWCNTs and polyvinyl pyrrolidone (PVP) on the rheological properties of grouting material were accordingly studied. It was found that the yield stress (τ0) and plastic viscosity (η) were slightly decreased when PVP content was low and increased when the PVP content increased. The effect of MWCNT diameter on τ0 was not found to be clear but was more significant on η. The smaller MWCNT diameter was, the more quickly η increase. It was also found that the thixotropic ring area was increased as the MWCNTs content increased. The addition of PVP and MWCNTs caused an increase in the number of entanglement points in different scales, which was the main reason for the viscosity and thixotropy increase. Therefore, the rheological properties of superfine cement grouting material should be adjusted when MWCNTs were added as a reinforcing component. Due to the wrapping of PVP on cement particles which isolates the contacting part between the water and the cement particles, it slows down the cement's hydration rate thus slows down the fluidity loss of the slurry.


2021 ◽  
Vol 898 ◽  
pp. 27-33
Author(s):  
Petr Figala ◽  
Rostislav Drochytka ◽  
Vit Černý ◽  
Radek Hermann ◽  
Jiří Kolísko

This paper deals with the study of chemical resistance of new cement-based grout for invert grouting. The aim of this work is to verify new mixtures with specific admixtures. The study monitors resistance to external sulphate attack. Specimens were placed into sulphate solution 29.8 g∙l-1 (44 g∙l-1 Na2SO4) according to DIN19753 standard. Based on the results gained, new mixtures will be designed and optimized by addition of suitable secondary raw materials (fly ash, waste foundry sand, waste glass, waste filers).


Polymers ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 906 ◽  
Author(s):  
Chunjing Zhang ◽  
Bo Shuai ◽  
Xuefeng Zhang ◽  
Xinxin Hu ◽  
Hui Zhang ◽  
...  

Flexibility, stretchability, and flame retardancy are of ever increasing importance in constructing grouting materials. Herein, a simple and effective strategy to make organic-inorganic composite grouting material in a “flexible, stretchable, and flame retardant” way was based on the excellent synergistic interactions among polyurethane prepolymer, red mud, polyethylene glycol, and trimethylolpropane. The resultant polyurethane/red mud composite grouting material with three-dimensional network structure presented a favorable flexibility, desirable compressive strength of 29.2 MPa at 50% compression state, and a good elongation at 15.1%. The grouting material was mainly composed of amorphous polyurethane and crystalline red mud, and its probable formation mechanism was reaction of prepolymer with H2O, polyethylene glycol and trimethylolpropane under vigorous stirring in the presence of catalyst. Furthermore, the grouting material possessed favorable thermal stability, flame retardancy and repairment performance for roadway cracks. This work may open a simple and convenient avenue for the massive engineering application of red mud and preparation of flexible organic-inorganic hybrid grouting material.


Sign in / Sign up

Export Citation Format

Share Document