scholarly journals Perspectives for high-performance permanent magnets: applications, coercivity, and new materials

2017 ◽  
Vol 8 (1) ◽  
pp. 013002 ◽  
Author(s):  
Satoshi Hirosawa ◽  
Masamichi Nishino ◽  
Seiji Miyashita
Keyword(s):  
High Performance ◽  
Permanent Magnets ◽  
New Materials

Phase transformations in rapidly solidified Nd33Fe77 alloy

1992 ◽  
Vol 50 (1) ◽  
pp. 56-57
Author(s):  
A. Zaluska ◽  
L.X. Liao ◽  
X. Chen ◽  
Z. Altounian ◽  
J.O. Ström-Olsen
Keyword(s):  
Phase Transformations ◽  
High Performance ◽  
Melt Spinning ◽  
Permanent Magnets ◽  
New Materials ◽  
Amorphous Precursor ◽  
Eutectic Melting ◽  
Subsequent Transformation ◽  
Fe Alloys ◽  
Rapidly Solidified

Nd-Fe alloys are important for high performance permanent magnets (usually in combination with B, C or N) and a knowledge of the metastable and stable phases of the system is necessary for the development of these new materials. An effective way to investigate such phases is by crystallizing an amorphous precursor.Amorphous ribbons of the binary alloy Nd33Fe77 were produced by melt-spinning. The phase transformations induced by heat treatment of the as-quenched ribbons is complex involving first the production of metastable phases followed by subsequent transformation into stable phases and finally eutectic melting.

Analytical Electron Microscopy of cast (Nd1-xRx)13Fe80C7 [R=Tb,Dy] permanent magnet materials

1990 ◽  
Vol 48 (4) ◽  
pp. 784-785
Author(s):  
Josef Fidler ◽  
Claudia Groiss ◽  
J. Eisses ◽  
K.H.J. Buschow
Keyword(s):  
Coercive Field ◽  
High Performance ◽  
Permanent Magnets ◽  
Magnetocrystalline Anisotropy ◽  
Analytical Electron Microscopy ◽  
Preparation Technique ◽  
Sintering Process ◽  
New Materials ◽  
Analytical Electron ◽  
Processing Techniques

High performance permanent magnets are based on compounds of the type SmCo5, Sm2Co17 and Nd2Fe14B exhibiting high magnetization and high magnetocrystalline anisotropy. The primary preparation technique for such magnets is the powdermetallurgical sintering process. The search for new materials and processing techniques led to the ternary system R-Fe-C.Compounds of the type R2Fe14C are isotypic with the crystal structure of Nd2Fe14B. Cast magnets based on R2Fe14C exhibit already a high coercive field, but decompose at higher temperatures into compounds of the type R2F17Cx. The transformation temperature Tt depends on the rare earth element and is about 850°C for the Nd-system and is larger than 1100°C for the Tb- and the Dy-system.The specimens investigated were cast in an arc furnace and annealed for 31 days at 850°C. Various magnets with different composition (Nd/Dy- and Nd/Tb-ratios) and coercivities were studied. The coercive field increases with decreasing Nd-content (see Table 1).

Mineral/microfibrillated cellulose composite materials: High performance products, applications, and product forms

TAPPI Journal ◽  
2018 ◽  
Vol 17 (09) ◽  
pp. 507-515 ◽  
Author(s):  
David Skuse ◽  
Mark Windebank ◽  
Tafadzwa Motsi ◽  
Guillaume Tellier
Keyword(s):  
Composite Materials ◽  
High Performance ◽  
Aqueous Suspension ◽  
Production Capacity ◽  
Cost Savings ◽  
Cost Effective ◽  
New Materials ◽  
Wet Strength ◽  
Product Forms ◽  
Cellulose Composite

When pulp and minerals are co-processed in aqueous suspension, the mineral acts as a grinding aid, facilitating the cost-effective production of fibrils. Furthermore, this processing allows the utilization of robust industrial milling equipment. There are 40000 dry metric tons of mineral/microfbrillated (MFC) cellulose composite production capacity in operation across three continents. These mineral/MFC products have been cleared by the FDA for use as a dry and wet strength agent in coated and uncoated food contact paper and paperboard applications. We have previously reported that use of these mineral/MFC composite materials in fiber-based applications allows generally improved wet and dry mechanical properties with concomitant opportunities for cost savings, property improvements, or grade developments and that the materials can be prepared using a range of fibers and minerals. Here, we: (1) report the development of new products that offer improved performance, (2) compare the performance of these new materials with that of a range of other nanocellulosic material types, (3) illustrate the performance of these new materials in reinforcement (paper and board) and viscosification applications, and (4) discuss product form requirements for different applications.

Synthesis of 3-(Cyclohexylamino)-2-arylimidazo[1,2-a]pyridine-8- carboxylic Acids Via an Efficient Three-component Condensation Reaction between Cyclohexylisocyanide and 2-Aminopyridine-3-carboxylic Acid in the Presence of Aromatic Aldehyde

2018 ◽  
Vol 21 (4) ◽  
pp. 298-301 ◽  
Author(s):  
Ghasem Marandi
Keyword(s):  
Biological Sciences ◽  
Carboxylic Acid ◽  
Carboxylic Acids ◽  
High Performance ◽  
Condensation Reaction ◽  
Aromatic Aldehydes ◽  
New Materials ◽  
One Pot ◽  
High Yields ◽  
Benzaldehyde Derivatives

Aim and Objective: The reaction of cyclohexylisocyanide and 2-aminopyridine-3- carboxylic acid in the presence of benzaldehyde derivatives in ethanol led to 3-(cyclohexylamino)-2- arylimidazo[1,2-a]pyridine-8-carboxylic acids in high yields. In a three component condensation reaction, isocyanide reacts with 2-aminopyridine-3-carboxylic acid and aromatic aldehydes without any prior activation. Material and Methods: The synthesized products have stable structures which have been characterized by IR, 1H, 13C and Mass spectroscopy as well as CHN-O analysis. Results: In continuation of our attempts to develop simple one-pot routes for the synthesis of 3- (cyclohexylamino)-2-arylimidazo[1,2-a]pyridine-8-carboxylic acids, aromatic aldehydes with divers substituted show a high performance. Conclusion: In conclusion, this study introduces the art of combinatorial chemistry using a simple one-pot procedure for the synthesis of new materials which are interesting compounds in medicinal and biological sciences.

scholarly journals Investigation on the La Replacement and Little Additive Modification of High-Performance Permanent Magnetic Strontium-Ferrite

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 1034
Author(s):  
Ching-Chien Huang ◽  
Chin-Chieh Mo ◽  
Guan-Ming Chen ◽  
Hsiao-Hsuan Hsu ◽  
Guo-Jiun Shu
Keyword(s):  
High Performance ◽  
Single Phase ◽  
Permanent Magnets ◽  
High Efficiency ◽  
Cobalt Content ◽  
Preparation Condition ◽  
Milling Process ◽  
Experimental Parameters ◽  
La Substitution ◽  
Hard Magnets

In this work, an experiment was carried out to investigate the preparation condition of anisotropic, Fe-deficient, M-type Sr ferrite with optimum magnetic and physical properties by changing experimental parameters, such as the La substitution amount and little additive modification during fine milling process. The compositions of the calcined ferrites were chosen according to the stoichiometry LaxSr1-xFe12-2xO19, where M-type single-phase calcined powder was synthesized with a composition of x = 0.30. The effect of CaCO3, SiO2, and Co3O4 inter-additives on the Sr ferrite was also discussed in order to obtain low-temperature sintered magnets. The magnetic properties of Br = 4608 Gauss, bHc = 3650 Oe, iHc = 3765 Oe, and (BH)max = 5.23 MGOe were obtained for Sr ferrite hard magnets with low cobalt content at 1.7 wt%, which will eventually be used as high-end permanent magnets for the high-efficiency motor application in automobiles with Br > 4600 ± 50 G and iHc > 3600 ± 50 Oe.

scholarly journals Alloying effect on the order–disorder transformation in tetragonal FeNi

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Li-Yun Tian ◽  
Oliver Gutfleisch ◽  
Olle Eriksson ◽  
Levente Vitos
Keyword(s):  
Transition Temperature ◽  
High Performance ◽  
Density Functional ◽  
Permanent Magnets ◽  
Positive Impact ◽  
Design Strategies ◽  
Alloying Effect ◽  
Functional Theory ◽  
Disorder Transition ◽  
Disorder Transition Temperature

AbstractTetragonal ($${\hbox{L1}}_{0}$$ L1 0 ) FeNi is a promising material for high-performance rare-earth-free permanent magnets. Pure tetragonal FeNi is very difficult to synthesize due to its low chemical order–disorder transition temperature ($$\approx {593}$$ ≈ 593  K), and thus one must consider alternative non-equilibrium processing routes and alloy design strategies that make the formation of tetragonal FeNi feasible. In this paper, we investigate by density functional theory as implemented in the exact muffin-tin orbitals method whether alloying FeNi with a suitable element can have a positive impact on the phase formation and ordering properties while largely maintaining its attractive intrinsic magnetic properties. We find that small amount of non-magnetic (Al and Ti) or magnetic (Cr and Co) elements increase the order–disorder transition temperature. Adding Mo to the Co-doped system further enhances the ordering temperature while the Curie temperature is decreased only by a few degrees. Our results show that alloying is a viable route to stabilizing the ordered tetragonal phase of FeNi.

scholarly journals A Novel High Performance Discrete Flux Integrator for Control Algorithms of Fast Rotating AC Machines

2021 ◽  
Vol 11 (5) ◽  
pp. 2150
Author(s):  
Claudio Rossi ◽  
Alessio Pilati ◽  
Marco Bertoldi
Keyword(s):  
High Performance ◽  
Permanent Magnets ◽  
Machine Model ◽  
Ac Machines ◽  
Fast Calculation ◽  
Calculation Time ◽  
Digital Implementation ◽  
Rotating Speed ◽  
Interior Permanent Magnets ◽  
Accuracy Performance

This paper deals with the digital implementation of a motor control algorithm based on a unified machine model, thus usable with every traditional electric machine type (induction, brushless with interior permanent magnets, surface permanent magnets or pure reluctance). Starting from the machine equations in matrix form in continuous time, the paper exposes their discrete time transformation, suitable for digital implementation. Since the solution of these equations requires integration, the virtual division of the calculation time in sub-intervals is proposed to make the calculations more accurate. Optimization of this solver enables faster runs and higher precision especially when high rotating speed requires fast calculation time. The proposed solver is presented at different implementation levels, and its speed and accuracy performance are compared with standard solvers.

Sign in / Sign up

Export Citation Format

Share Document