Electrochemical-Active Chlorine Generation by Circulating the Electrolyte Through an Electrolytic Cell

2013 ◽  
Vol 30 (2) ◽  
pp. 82-88 ◽  
Author(s):  
Husam D. Al-Hamaiedeh
Keyword(s):  
Electrolytic Cell ◽  
Active Chlorine ◽  
Chlorine Generation

In situ active chlorine generation for the treatment of dye-containing effluents

2009 ◽  
Vol 39 (12) ◽  
pp. 2397-2408 ◽  
Author(s):  
François Zaviska ◽  
Patrick Drogui ◽  
Jean-François Blais ◽  
Guy Mercier
Keyword(s):  
Active Chlorine ◽  
Chlorine Generation

Kinetic modeling of active chlorine generation by low-amperage pulsating direct current in a circulating brine solution

2009 ◽  
Vol 92 (4) ◽  
pp. 461-466 ◽  
Author(s):  
Khamtorn Pudtikajorn ◽  
Il-Shik Shin ◽  
Woo-Sik Jeong ◽  
Donghwa Chung
Keyword(s):  
Kinetic Modeling ◽  
Direct Current ◽  
Active Chlorine ◽  
Brine Solution ◽  
Chlorine Generation

Rational Design of Dimensionally Stable Anodes for Active Chlorine Generation

ACS Catalysis ◽  
2021 ◽  
pp. 12423-12432
Author(s):  
Hyun Woo Lim ◽  
Deok Ki Cho ◽  
Jae Hyun Park ◽  
Su Geun Ji ◽  
You Jin Ahn ◽  
...  
Keyword(s):  
Rational Design ◽  
Active Chlorine ◽  
Dimensionally Stable Anodes ◽  
Chlorine Generation

scholarly journals Performance Investigation of Electrochemical Assisted HClO/Fe2+ Process For The Treatment of Landfill Leachate

2021 ◽  
Author(s):  
Zhihong Ye ◽  
Fei Miao ◽  
Hui Zhang
Keyword(s):  
Current Density ◽  
Landfill Leachate ◽  
Chloride Concentration ◽  
Ammonia Nitrogen ◽  
Active Chlorine ◽  
Bulk Liquid ◽  
Applied Current ◽  
Promising Alternative ◽  
Applied Current Density ◽  
Chlorine Generation

Abstract The feasibility of removal of COD and ammonia nitrogen (NH4+-N) from landfill leachate by electrochemical assisted HClO/Fe2+ process is demonstrated for the first time. The performance of active chlorine generation at the anode was evaluated in Na2SO4/NaCl media, and a higher amount of active chlorine was produced at greater chloride concentration and higher current density. The probe experiments confirmed the coexistence of hydroxyl radical (·OH) and Fe(IV)-oxo complex (FeIVO2+) in the HClO/Fe2+ system. The influence of initial pH, Fe2+ concentration and applied current density on COD and NH4+-N abatement was elaborately investigated. The optimum pH was found to be 3.0, and the proper increase in Fe2+ dosage and current density resulted in higher COD removal due to the accelerated accumulation of ·OH and FeIVO2+ in the bulk liquid phase. Whereas, the NH4+-N oxidation was significantly affected by the applied current density because of the effective active chlorine generation at high current, but was nearly independent of Fe2+ concentration. The reaction mechanism of electrochemical assisted HClO/Fe2+ treatment of landfill leachate was finally proposed. The powerful ·OH and FeIVO2+, in concomitance with active chlorine and M(·OH) were responsible for COD abatement and active chlorine played a key role in NH4+-N oxidation. The proposed electrochemical assisted HClO/Fe2+ process is a promising alternative for the treatment of refractory landfill leachate.

scholarly journals Development of RuO2/TiO2 titanium anodes and a device for in situ active chlorine generation

2013 ◽  
Vol 67 (2) ◽  
pp. 313-321 ◽  
Author(s):  
Miroslav Spasojevic ◽  
Tomislav Trisovic ◽  
Lenka Ribic-Zelenovic ◽  
Pavle Spasojevic
Keyword(s):  
Sodium Chloride ◽  
Ion Selectivity ◽  
Water Disinfection ◽  
Raw Material ◽  
Active Chlorine ◽  
Operational Parameters ◽  
Technological Parameters ◽  
Corrosion Stability ◽  
New Findings ◽  
Chlorine Generation

Chlorine is used worldwide for water disinfection purposes. However, due to its toxicity the EU has imposed a set of standards that must be applied when transporting and storing chlorine. In Serbia, numerous studies have been conducted attempting to develop the technology for the generation of active chlorine disinfectant but with a non-toxic aqueous solution of sodium chloride as the raw material. This study provides an overview of the titanium anodes activated by thermally obtained solid solution of ruthenium and titanium oxide development. It also presents new findings on the effect of the temperature of thermal treatment, the composition, the thickness of an active coating on its microstructural properties, and consequently on the catalytic activity, ion selectivity, and corrosion stability during active chlorine generation through the electrolysis of dilute sodium chloride solutions at room temperature. The study also evaluates the effect of the kinetic and operational parameters of the electrochemical process of active chlorine generation on both current and energy efficiencies. The results obtained were used to determine optimal values of technological parameters of the production process. This comprehensive research resulted in the construction of different types of remote-controlled and fully automated active chlorine generating plants.

Highly Selective Active Chlorine Generation Electrocatalyzed by Co3O4 Nanoparticles: Mechanistic Investigation through in Situ Electrokinetic and Spectroscopic Analyses

2019 ◽  
Vol 10 (6) ◽  
pp. 1226-1233 ◽  
Author(s):  
Heonjin Ha ◽  
Kyoungsuk Jin ◽  
Sunghak Park ◽  
Kang-Gyu Lee ◽  
Kang Hee Cho ◽  
...  
Keyword(s):  
Active Chlorine ◽  
Co3o4 Nanoparticles ◽  
Spectroscopic Analyses ◽  
Mechanistic Investigation ◽  
Chlorine Generation

Self-powered electrochemical system by combining Fenton reaction and active chlorine generation for organic contaminant treatment

Nano Research ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2729-2735 ◽  
Author(s):  
Yawei Feng ◽  
Kai Han ◽  
Tao Jiang ◽  
Zhenfeng Bian ◽  
Xi Liang ◽  
...  
Keyword(s):  
Fenton Reaction ◽  
Organic Contaminant ◽  
Active Chlorine ◽  
Electrochemical System ◽  
Self Powered ◽  
Chlorine Generation

scholarly journals Factors Influencing the Formation of Sodium Hydroxide by an Ion Exchange Membrane Cell

Batteries ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 34
Author(s):  
Jimmy Aurelio Rosales-Huamani ◽  
Juan Taumaturgo Medina-Collana ◽  
Zoila Margarita Diaz-Cordova ◽  
Jorge Alberto Montaño-Pisfil
Keyword(s):  
Ion Exchange ◽  
Sodium Hydroxide ◽  
Linear Trend ◽  
Electrolytic Cell ◽  
Electrolysis Time ◽  
Operational Parameters ◽  
Graphite Electrodes ◽  
Exchange Membrane ◽  
Membrane Cell ◽  
Production Cell

The present study aimed to evaluate the factors that influence the formation of sodium hydroxide (NaOH) by means of an electrolytic cell with ion exchange membranes. To achieve this experiment, the NaOH production cell had to be designed and built inexpensively, using graphite electrodes. The operational parameters in our study were: initial NaOH concentration, applied voltage, and temperature. All experiments were carried out using model NaCl solutions with a concentration of 40 g/L for 150 min. The results of the experiment were that the NaOH concentration, conductivity, and pH presented an increasing linear trend with the electrolysis time. Finally, it was possible to obtain the efficiency level of the electric current in our investigation, which was an average of 80.2%, that indicated good performance of the built cell.

scholarly journals In situ synthesis of methane using Ag–GDC composite electrodes in a tubular solid oxide electrolytic cell: new insight into the role of oxide ion removal

2021 ◽  
Vol 5 (7) ◽  
pp. 2055-2064
Author(s):  
Saheli Biswas ◽  
Aniruddha P. Kulkarni ◽  
Daniel Fini ◽  
Sarbjit Giddey ◽  
Sankar Bhattacharya
Keyword(s):  
Electrolytic Cell ◽  
Composite Electrodes ◽  
Ion Removal ◽  
Single Temperature ◽  
Methanation Catalyst ◽  
Oxide Ion ◽  
Insight Into ◽  
Electrochemical Phenomenon

In situ synthesis of methane in a single-temperature zone SOEC in the absence of any methanation catalyst is a completely electrochemical phenomenon governed by the thermodynamic equilibrium of various reactions.

Sign in / Sign up

Export Citation Format

Share Document