Irregular Waves of Growth from Structural Innovation

1990 ◽  
pp. 85-101
Author(s):  
Richard M. Goodwin
Keyword(s):  
Irregular Waves ◽  
Structural Innovation

Bulk drag coefficient of a subaquatic vegetation subjected to irregular waves: Influence of Reynolds and Keulegan-Carpenter numbers

2020 ◽  
pp. 34-42
Author(s):  
Thibault Chastel ◽  
Kevin Botten ◽  
Nathalie Durand ◽  
Nicole Goutal
Keyword(s):  
Drag Coefficient ◽  
Wave Height ◽  
Wave Attenuation ◽  
Empirical Relationship ◽  
Breaking Waves ◽  
Irregular Waves ◽  
Geometrical Parameters ◽  
Flume Experiments ◽  
Seagrass Meadows ◽  
Artificial Vegetation

Seagrass meadows are essential for protection of coastal erosion by damping wave and stabilizing the seabed. Seagrass are considered as a source of water resistance which modifies strongly the wave dynamics. As a part of EDF R & D seagrass restoration project in the Berre lagoon, we quantify the wave attenuation due to artificial vegetation distributed in a flume. Experiments have been conducted at Saint-Venant Hydraulics Laboratory wave flume (Chatou, France). We measure the wave damping with 13 resistive waves gauges along a distance L = 22.5 m for the “low” density and L = 12.15 m for the “high” density of vegetation mimics. A JONSWAP spectrum is used for the generation of irregular waves with significant wave height Hs ranging from 0.10 to 0.23 m and peak period Tp ranging from 1 to 3 s. Artificial vegetation is a model of Posidonia oceanica seagrass species represented by slightly flexible polypropylene shoots with 8 artificial leaves of 0.28 and 0.16 m height. Different hydrodynamics conditions (Hs, Tp, water depth hw) and geometrical parameters (submergence ratio α, shoot density N) have been tested to see their influence on wave attenuation. For a high submergence ratio (typically 0.7), the wave attenuation can reach 67% of the incident wave height whereas for a low submergence ratio (< 0.2) the wave attenuation is negligible. From each experiment, a bulk drag coefficient has been extracted following the energy dissipation model for irregular non-breaking waves developed by Mendez and Losada (2004). This model, based on the assumption that the energy loss over the species meadow is essentially due to the drag force, takes into account both wave and vegetation parameter. Finally, we found an empirical relationship for Cd depending on 2 dimensionless parameters: the Reynolds and Keulegan-Carpenter numbers. These relationships are compared with other similar studies.

APPLICATION OF ACOUSTIC METHODS IN RESEARCHES OF THE BOTTOM SEDIMENT DYNAMICS

2018 ◽  
Author(s):  
Б. Дивинский ◽  
B. Divinskiy ◽  
И. Грюне ◽  
I. Gryune ◽  
Р. Косьян ◽  
...  
Keyword(s):  
Suspended Sediment ◽  
Sediment Concentration ◽  
Irregular Waves ◽  
Single Frequency ◽  
Contactless Measurement ◽  
Measurement Means ◽  
Uniform Field ◽  
Wave Flume ◽  
Acoustic Methods ◽  
Back Scattering

Acoustic methods belong to contactless measurement means, possess high spatial and time resolution. Thus, the use of multifrequency allows directly profile both concentration and granulometric structure of the suspended substances. In 2008 in the Big Wave Flume (Hanover, Germany) by efforts of the Russian and German scientists there have been carried out the experiment on studying the bottom material suspension laws under the influence of irregular waves. The Aquascat 1000 acoustic back scattering sensor (ABS) manufactured by British company Aquatec (www.aquatecsubsea.com), equipped by a three-frequency transmitter with frequencies 1,0, 2,0 and 3,84 MHz, has been set on distance of 0,75 m from the bottom and 111 m from wave generator at the total depth of 3,2 m. Several dozen series of measurements at various parameters of surface waves have been carried out. The general picture of suspension is so that the external dynamic influence (currents, wave movements, turbulence, gravitation forces) creates a non-uniform field (gradient) of the suspended particles and in most cases due to this the average size of particles undergoes to the spatial-time variations. For this reason while defining the mass concentration of suspended sediment, using the single frequency transmitter there is necessity for numerous definition of the suspension granulometric structure what by isn’t always possible. If two and more frequencies are used the observed results comparison can give the information on average diameters of particles and on that basis the calculation of suspended sediment concentration is possibleLet's emphasize the basic advantages of back scattering acoustic gauges usage: – Obtaining the particles sizes and concentration distribution profiles is possible; – The initial granulometric structure of bottom sediments can be unknown (at use of several frequencies). The following can be referred to some lacks of the device: – The system should be calibrated in laboratory conditions; – In a positive feedback conditions the iterative computing process can converge to zero or to infinity. In this case experiments with a variation of carrier frequencies chosen for the analysis allow partially solve the problem (say experiments with different frequencies pairs, as 2/1 of MHz or 4/2 MHz).

Experimental study of the effect of wind above irregular waves on the wave-induced load statistics

2021 ◽  
pp. 103940
Author(s):  
Julie Caroee Kristoffersen ◽  
Henrik Bredmose ◽  
Christos Thomas Georgakis ◽  
Hubert Branger ◽  
Christopher Luneau
Keyword(s):  
Experimental Study ◽  
Irregular Waves ◽  
Wave Induced

scholarly journals Time Scale for Scour Beneath Pipelines Due to Long-Crested and Short-Crested Nonlinear Random Waves Plus Current

2021 ◽  
Vol 9 (2) ◽  
pp. 114
Author(s):  
Dag Myrhaug ◽  
Muk Chen Ong
Keyword(s):  
Time Scale ◽  
Current Flow ◽  
Irregular Waves ◽  
Wave Crest ◽  
Random Wave ◽  
Random Waves ◽  
Flow Conditions ◽  
Regular Waves ◽  
Nonlinear Random Waves ◽  
2D And 3D

This article derives the time scale of pipeline scour caused by 2D (long-crested) and 3D (short-crested) nonlinear irregular waves and current for wave-dominant flow. The motivation is to provide a simple engineering tool suitable to use when assessing the time scale of equilibrium pipeline scour for these flow conditions. The method assumes the random wave process to be stationary and narrow banded adopting a distribution of the wave crest height representing 2D and 3D nonlinear irregular waves and a time scale formula for regular waves plus current. The presented results cover a range of random waves plus current flow conditions for which the method is valid. Results for typical field conditions are also presented. A possible application of the outcome of this study is that, e.g., consulting engineers can use it as part of assessing the on-bottom stability of seabed pipelines.

scholarly journals Representative Transmission Coefficient for Evaluating the Wave Attenuation Performance of 3D Floating Breakwaters in Regular and Irregular Waves

2021 ◽  
Vol 9 (4) ◽  
pp. 388
Author(s):  
Huu Phu Nguyen ◽  
Jeong Cheol Park ◽  
Mengmeng Han ◽  
Chien Ming Wang ◽  
Nagi Abdussamie ◽  
...  
Keyword(s):  
Transmission Coefficient ◽  
Wave Height ◽  
Wave Attenuation ◽  
Transmitted Wave ◽  
Irregular Waves ◽  
Hydrodynamic Analysis ◽  
Evaluation Approach ◽  
Floating Breakwater ◽  
Floating Breakwaters ◽  
Evaluation Approaches

Wave attenuation performance is the prime consideration when designing any floating breakwater. For a 2D hydrodynamic analysis of a floating breakwater, the wave attenuation performance is evaluated by the transmission coefficient, which is defined as the ratio between the transmitted wave height and the incident wave height. For a 3D breakwater, some researchers still adopted this evaluation approach with the transmitted wave height taken at a surface point, while others used the mean transmission coefficient within a surface area. This paper aims to first examine the rationality of these two evaluation approaches via verified numerical simulations of 3D heave-only floating breakwaters in regular and irregular waves. A new index—a representative transmission coefficient—is then presented for one to easily compare the wave attenuation performances of different 3D floating breakwater designs.

Experimental Investigation vs Numerical Simulation of the Dynamic Response of a Moored Floating Structure to Waves

2014 ◽  
Author(s):  
Daniele Dessi ◽  
Sara Siniscalchi Minna
Keyword(s):  
Dynamical Behavior ◽  
Irregular Waves ◽  
Mooring Line ◽  
Floating Structure ◽  
Mooring Lines ◽  
Wave Energy Converters ◽  
Time Histories ◽  
Actual Configuration ◽  
Proper Orthogonal ◽  
Dynamic Wave

A combined numerical/theoretical investigation of a moored floating structure response to incoming waves is presented. The floating structure consists of three bodies, equipped with fenders, joined by elastic cables. The system is also moored to the seabed with eight mooring lines. This corresponds to an actual configuration of a floating structure used as a multipurpose platform for hosting wind-turbines, aquaculture farms or wave-energy converters. The dynamic wave response is investigated with numerical simulations in regular and irregular waves, showing a good agreement with experiments in terms of time histories of pitch, heave and surge motions as well as of the mooring line forces. To highlight the dynamical behavior of this complex configuration, the proper orthogonal decomposition is used for extracting the principal modes by which the moored structure oscillates in waves giving further insights about the way waves excites the structure.

A CFD Study of Focused Extreme Wave Impact on Decks of Offshore Structures

2014 ◽  
Author(s):  
Xin Lu ◽  
Pankaj Kumar ◽  
Anand Bahuguni ◽  
Yanling Wu
Keyword(s):  
Real World ◽  
Offshore Structures ◽  
Air Gap ◽  
Irregular Waves ◽  
Linear Wave ◽  
Extreme Wave ◽  
Wave Impact ◽  
Loading Test ◽  
Wide Range ◽  
Wave Maker

The design of offshore structures for extreme/abnormal waves assumes that there is sufficient air gap such that waves will not hit the platform deck. Due to inaccuracies in the predictions of extreme wave crests in addition to settlement or sea-level increases, the required air gap between the crest of the extreme wave and the deck is often inadequate in existing platforms and therefore wave-in-deck loads need to be considered when assessing the integrity of such platforms. The problem of wave-in-deck loading involves very complex physics and demands intensive study. In the Computational Fluid Mechanics (CFD) approach, two critical issues must be addressed, namely the efficient, realistic numerical wave maker and the accurate free surface capturing methodology. Most reported CFD research on wave-in-deck loads consider regular waves only, for instance the Stokes fifth-order waves. They are, however, recognized by designers as approximate approaches since “real world” sea states consist of random irregular waves. In our work, we report a recently developed focused extreme wave maker based on the NewWave theory. This model can better approximate the “real world” conditions, and is more efficient than conventional random wave makers. It is able to efficiently generate targeted waves at a prescribed time and location. The work is implemented and integrated with OpenFOAM, an open source platform that receives more and more attention in a wide range of industrial applications. We will describe the developed numerical method of predicting highly non-linear wave-in-deck loads in the time domain. The model’s capability is firstly demonstrated against 3D model testing experiments on a fixed block with various deck orientations under random waves. A detailed loading analysis is conducted and compared with available numerical and measurement data. It is then applied to an extreme wave loading test on a selected bridge with multiple under-deck girders. The waves are focused extreme irregular waves derived from NewWave theory and JONSWAP spectra.

Sign in / Sign up

Export Citation Format

Share Document