Microbiological Plate Assay for Determination of Tilmicosin in Bovine Serum

1995 ◽  
Vol 78 (3) ◽  
pp. 659-662 ◽  
Author(s):  
Mark R Coleman ◽  
James S Peloso ◽  
John W Moran
Keyword(s):  
Bovine Serum ◽  
Limit Of Detection ◽  
Agar Plate ◽  
Treated Animal ◽  
Validation Data ◽  
Method Performance ◽  
Plate Assay ◽  
Relative Standard ◽  
Limit Of Quantitation

Abstract A microbiological agar plate assay is described for determination of tilmicosin in bovine blood serum. The serum or serum dilution is added directly to wells cut in the agar plates. Tilmicosin activity is determined by measuring the zone of bacterial growth inhibition in agar medium inoculated with Micrococcus luteus, ATCC 9341. The assay was validated by evaluating the following parameters: accuracy, precision, linearity, parallelism, ruggedness, storage stability, and relative activity of isomers. Accuracy was evaluated with freshly collected bovine serum and with commercially available sera. Recoveries ranged from 93.4 to 97.5% across a fortification range of 0.08 to 1.28 μg/mL. Precision was estimated over a 6-day period with serum obtained from a tilmicosin-treated animal. Relative standard deviations were 0.63 to 3.13% within day and 5.23% across 6 days. Standard curves were linear with little variation in slope. No parallelism was observed between tilmicosin in serum and tilmicosin in buffered saline. The limit of detection was estimated to be 0.05 μg/mL, and the validated limit of quantitation was 0.08 μg/mL. Ruggedness was evaluated with different lots of antibiotic medium, different lots of sera, and different analysts. These variables did not affect method performance. Analyses of tilmicosin in frozen sera demonstrated that tilmicosin is stable for up to 16 days when stored at −20°C. A comparison of the relative microbiological activities of the purified cis and trans isomers of tilmicosin to that of the reference standard indicated no differences in microbiological activities, and showed a parallel response among the 3. The validation data demonstrate that this method is a rugged, reliable, and simple assay for tilmicosin in serum.

Simultaneous Determination of Four Herbicide and Pesticide Residues in Chinese Green Tea Using QuEChERS Purification Procedure and UPLC-MS/MS Analysis

2013 ◽  
Vol 634-638 ◽  
pp. 1586-1590
Author(s):  
Su Fang Wang ◽  
Shou Jie Zhang ◽  
Chun Hong Dong ◽  
Guo Qing Wang ◽  
Jun Feng Guo ◽  
...  
Keyword(s):  
Formic Acid ◽  
Simultaneous Determination ◽  
Green Tea ◽  
Limit Of Detection ◽  
Multiple Reaction Monitoring ◽  
Graphitized Carbon Black ◽  
Ms Analysis ◽  
Relative Standard ◽  
Limit Of Quantitation

A method for simultaneous determination of residuals of four herbicides and pesticides, simazine, carboxin, diflubenzuron and rotenone, in Chinese green tea was developed. In the proposed method, the tea powder was placed in a centrifuge tube with a plug, extracted in saturated aqueous sodium chloride solution and acetonitrile, agitated using vortex oscillator, and then centrifuged 5 min at 4000 rpm. The supernatant solution was purified by primary secondary amine (PSA) sorbent, C18 power, and graphitized carbon black powder, respectively. Then the purified extracts were dissolved with acetonitrile:0.1% formic acid aqueous solution (40:60, V/V) and agitated, filtered using a syringe with 0.22 μm nylon filter prior to UPLC-MS/MS analysis. The UPLC analysis was performed on an ACQUITY UPLC® HSS T3 column (2.1 mm×100 mm, 1.8 µm), using acetonitrile-0.1% formic acid as mobile phase with the flow rate as 0.3 mL•min-1. Injection volume was 10 µL. Positive ionization mode was applied, and the ions were monitored in the multiple reaction monitoring (MRM) mode with curtain gas 0.069 MPa, collision gas 0.052 MPa, ESI ion spray voltage 5000 V, temperature 550 °C, nebulizer gas 0.24 MPa, and turbo gas 0.28 MPa. The limit of detection (LOD) and limit of quantitation (LOQ) of the proposed method are 1 μg•kg-1and 5 μg•kg-1, respectively. The average recoveries of the four pesticides at 10, 20, and 50 µg•kg-1spiking levels range from 77.4% to 95.3%. TheSupersSuperscript textcript textrelative standard deviation (RSD) (n=6) range form 11.83% to 4.52%.

scholarly journals SENSITIVE DETERMINATION OF RELATED SUBSTANCES IN PIOGLITAZONE HYDROCHLORIDE BY HPLC

2017 ◽  
Vol 9 (2) ◽  
pp. 34
Author(s):  
N. Balaji ◽  
Sayeeda Sultana
Keyword(s):  
Mobile Phase ◽  
High Performance ◽  
Limit Of Detection ◽  
High Performance Liquid Chromatographic ◽  
Hplc Method ◽  
Internal Diameter ◽  
Related Substances ◽  
Relative Standard ◽  
Limit Of Quantitation

Objective: An efficient, high performance liquid chromatographic method has been developed and validated for the quantification of related substances in pioglitazone hydrochloride drug substance.Methods: This method includes the determination of three related substances in pioglitazone hydrochloride. The mobile phase A is 0.1% w/v triethylamine in water with pH 2.5 adjusted by dilute phosphoric acid. The mobile phase B is premixed and degassed mixtures of acetonitrile and methanol. The flow rate was 1 ml/min. The elution used was gradient mode. The HPLC column used for the analysis was symmetry C18 with a length of 250 mm, the internal diameter of 4.6 mm and particle size of 5.0 microns.Results: The developed method was found to be linear with the range of 0.006-250% with a coefficient of correlation 0.99. The precision study revealed that the percentage relative standard deviation was within the acceptable limit. The limit of detection and limit of quantitation of the impurities was less than 0.002%and 0.006% with respect to pioglitazone hydrochloride test concentration of 2000 µg/ml respectively. This method has been validated as per ICH guidelines Q2 (R1).Conclusion: A reliable, economical HPLC method was magnificently established for quantitative analysis of related substances of pioglitazone hydrochloride drug substance.

scholarly journals Liquid Chromatographic Determination of α-Solasonine in Frozen Green Peas as an Indicator of the Presence of Nightshade Berries

2003 ◽  
Vol 86 (4) ◽  
pp. 759-763 ◽  
Author(s):  
Peter Cavlovic ◽  
Mohan Mankotia ◽  
Peter Pantazopoulos ◽  
Peter M Scott
Keyword(s):  
Limit Of Detection ◽  
Chromatographic Determination ◽  
Solanum Nigrum ◽  
Expanded Uncertainty ◽  
Method Performance ◽  
Limit Of Quantitation ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic ◽  
Green Peas

Abstract Nightshade berries containing glycoalkaloids can be a contaminant in green peas. Methodology was developed to detect this contamination. The glycoalkaloid α-solasonine was extracted from frozen green peas with 1% (v/v) acetic acid, cleaned up on a C18 cartridge, and determined by liquid chromatography with UV detection at 200 nm. Method performance characteristics for the determination of α-solasonine include linearity from 140 to 1500 ng injected (r = 0.9996–0.9999); recovery ranging from 68 to 79%; limit of quantitation (LOQ) = 4.5 ppm (280 ng standard), and limit of detection = 0.64 ppm (40 ng standard). At the LOQ, the expanded uncertainty at 95% confidence was 0.38 × the reported value. The method was applied to the detection of α-solasonine in frozen green peas in a 2-year study of 60 samples of frozen green peas from Ontario, Canada. None of the samples contained α-solasonine. No unripe berries of Solanum nigrum were detected visually in the samples.

scholarly journals Determination of Tianeptine in Tablets by High-Performance Liquid Chromatography with Fluorescence Detection

2007 ◽  
Vol 90 (3) ◽  
pp. 720-724
Author(s):  
Sevgi Tatar Ulu
Keyword(s):  
Lower Limit ◽  
High Performance ◽  
Limit Of Detection ◽  
Internal Standard ◽  
Linear Calibration ◽  
Fluorescence Detector ◽  
Relative Standard ◽  
Validation Parameters ◽  
Limit Of Quantitation

Abstract A sensitive and selective high-performance liquid chromatographic method has been developed for the determination of tianeptine (Tia) in tablets. The method is based on derivatization of Tia with 4-chloro-7-nitrobenzofurazan (NBD-Cl). A mobile phase consisting of acetonitrile10 mM orthophosphoric acid (pH 2.5; 77 + 23) was used at a flow rate of 1 mL/min on a C18 column. The Tia-NBD derivative was monitored using a fluorescence detector, with emission set at 520 nm and excitation at 458 nm. Gabapentin was selected as an internal standard. Linear calibration graphs were obtained in the concentration range of 45300 ng/mL. The lower limit of detection (LOD) was 10 ng/mL at a signal-to-noise ratio of 4. The lower limit of quantitation (LOQ) was 45 ng/mL. The relative standard values for intra- and interday precision were <0.46 and <0.57%, respectively. The recovery of the drug samples ranged between 98.89 and 99.85%. No chromatographic interference from the tablet excipients was found. The proposed method was validated in terms of precision, robustness, recovery, LOD, and LOQ. All the validation parameters were within the acceptance range. The proposed method was applied for the determination of Tia in commercially available tablets. The results were compared with those obtained by an ultraviolet spectrophotometric method using t- and F-tests.

scholarly journals Determination of 7B3 Residues in Cotton Plants by Liquid Chromatography/Mass Spectrometry

2009 ◽  
Vol 92 (1) ◽  
pp. 302-306 ◽  
Author(s):  
Xiao-Jing Yan ◽  
Xiao-Mei Liang ◽  
Yan-Jun Xu ◽  
Shu-Hui Jin ◽  
Dao-Quan Wang
Keyword(s):  
Mass Spectrometry ◽  
Liquid Chromatography ◽  
Limit Of Detection ◽  
Reversed Phase ◽  
Liquid Chromatography Mass Spectrometry ◽  
Chromatography Mass Spectrometry ◽  
Relative Standard ◽  
Limit Of Quantitation ◽  
Cotton Plants

Abstract A method was developed for the determination of 7B3 (12-propyloxyimino-1,15-pentadecanlactam), a novel macrolactam fungicide, by liquid chromatography/mass spectrometry (LC/MS) with positive electrospray ionization (ESI+). The method used a reversed-phase C18 column and acetonitrilewater (60 + 40, v/v) mobile phase. The quick, easy, cheap, effective, rugged, and safe method was used for extraction of 7B3 from cotton plants, which involved the extraction of 10 g homogenized sample with 10 mL acetonitrile, followed by the addition of 4 g anhydrous MgSO4 and 1.0 g NaCl. After centrifugation, 1 mL of the buffered acetonitrile extract was transferred into a tube containing 50 mg primary secondary amine sorbent and 100 mg anhydrous MgSO4. After shaking and centrifugation, the final extract was transferred to an autosampler vial for concurrent analysis by LC/MS. The results of 7B3 determined by LC/MS in the selective ion monitoring mode were linear, and the matrix effect of the method was evaluated. The average recoveries of 7B3 fortified at different levels were within 84.1100.2, and the relative standard deviations were <7.5 for all samples analyzed. The method limit of detection and the limit of quantitation values were 0.03 and 0.1 mg/kg, respectively. The proposed method was successfully applied to determine 7B3 residues in practical samples. This method is sensitive, accurate, reliable, simple, and safe.

scholarly journals DEVELOPMENT AND VALIDATION OF ULTRAVIOLET-SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF FEBUXOSTAT FOR CONDUCTING IN-VITRO QUALITY CONTROL TESTS IN BULK AND PHARMACEUTICAL DOSAGE FORMS

2018 ◽  
Vol 11 (9) ◽  
pp. 115
Author(s):  
Jaspreet Kaur ◽  
Daljit Kaur ◽  
Sukhmeet Singh
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Dosage Forms ◽  
Pharmaceutical Dosage Forms ◽  
Relative Standard ◽  
Limit Of Quantitation ◽  
Development And Validation

Objective: A simple, accurate, and selective ultraviolet-spectrophotometric method has been developed for the estimation of febuxostat in the bulk and pharmaceutical dosage forms.Method: The method was developed and validated according to International Conference on Harmonization (ICH Q2 R1) guidelines. The developed method was validated statistically with respect to linearity, range, precision, accuracy, ruggedness, limit of detection (LOD), limit of quantitation (LOQ), and recovery. Specificity of the method was demonstrated by applying different stressed conditions to drug samples such as acid hydrolysis, alkaline hydrolysis, oxidative, photolytic, and thermal degradation.Results: The study was conducted using phosphate buffer pH 6.8 and λmax was found to be 312 nm. Standard plot having a concentration range of 1–10 μg/ml showed a good linear relationship with R2=0.999. The LOD and LOQ were found to be 0.118 μg/ml and 0.595 μg/ml, respectively. Recovery and percentage relative standard deviations were found to be 100.157±0.332% and <2%, respectively.Conclusion: Proposed method was successfully applicable to the pharmaceutical formulations containing febuxostat. Thus, the developed method is found to be simple, sensitive, accurate, precise, reproducible, and economical for the determination of febuxostat in pharmaceutical dosage forms.

scholarly journals Determination of Arsenic, Cadmium, Mercury, and Lead by Inductively Coupled Plasma/Mass Spectrometry in Foods after Pressure Digestion: NMKL Interlaboratory Study

2007 ◽  
Vol 90 (3) ◽  
pp. 844-856 ◽  
Author(s):  
Kaare Julshamn ◽  
Amund Maage ◽  
Hilde Skaar Norli ◽  
Karl H Grobecker ◽  
Lars Jorhem ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Inductively Coupled Plasma ◽  
Method Performance ◽  
Inductively Coupled ◽  
Icp Ms ◽  
Relative Standard ◽  
Limit Of Quantitation ◽  
Plasma Mass Spectrometry ◽  
Standard Deviations

Abstract Thirteen laboratories participated in an interlaboratory method performance (collaborative) study on a method for the determination of arsenic, cadmium, mercury, and lead by inductively coupled plasma/mass spectrometry (ICP/MS) after pressure digestion including the microwave heating technique. Prior to the study, the laboratories were able to practice on samples with defined element levels (pretrial test). The method was tested on a total of 7 foodstuffs: carrot puree, fish muscle, mushroom, graham flour, simulated diet, scampi, and mussel powder. The elemental concentrations in mg/kg dry matter (dm) ranged from 0.0621.4 for As, 0.0328.3 for Cd, 0.040.6 for Hg, and 0.012.4 for Pb. The materials used in the study were presented to the participants as blind duplicates, and the participants were asked to perform single determinations on each sample. The repeatability relative standard deviations (RSDr) for As ranged from 3.8 to 24%, for Cd from 2.6 to 6.9%, for Hg from 4.8 to 8.3%, and for Pb from 2.9 to 27%. The reproducibility relative standard deviations (RSDR) for As ranged from 9.0 to 28%, for Cd from 2.8 to 18%, for Hg from 9.9 to 24%, and for Pb from 8.0 to 50%. The HorRat values were less than 1.5 for all test samples, except for the determination of Pb in wheat flour at a level close to the limit of quantitation (0.01 mg/kg dm). The study showed that the ICP/MS method is satisfactory as a standard method for elemental determinations in foodstuffs.

scholarly journals Determination of carcinogenic herbicides in milk samples using green non-ionic silicone surfactant of cloud point extraction and spectrophotometry

2018 ◽  
Vol 5 (4) ◽  
pp. 171500 ◽  
Author(s):  
N. I. Mohd ◽  
N. N. M. Zain ◽  
M. Raoov ◽  
S. Mohamad
Keyword(s):  
Cloud Point ◽  
Cloud Point Extraction ◽  
Limit Of Detection ◽  
Cost Effective ◽  
Silicone Surfactant ◽  
Extraction Solvent ◽  
Milk Samples ◽  
Relative Standard ◽  
Limit Of Quantitation

A new cloud point methodology was successfully used for the extraction of carcinogenic pesticides in milk samples as a prior step to their determination by spectrophotometry. In this work, non-ionic silicone surfactant, also known as 3-(3-hydroxypropyl-heptatrimethylxyloxane), was chosen as a green extraction solvent because of its structure and properties. The effect of different parameters, such as the type of surfactant, concentration and volume of surfactant, pH, salt, temperature, incubation time and water content on the cloud point extraction of carcinogenic pesticides such as atrazine and propazine, was studied in detail and a set of optimum conditions was established. A good correlation coefficient ( R 2 ) in the range of 0.991–0.997 for all calibration curves was obtained. The limit of detection was 1.06 µg l −1 (atrazine) and 1.22 µg l −1 (propazine), and the limit of quantitation was 3.54 µg l −1 (atrazine) and 4.07 µg l −1 (propazine). Satisfactory recoveries in the range of 81–108% were determined in milk samples at 5 and 1000 µg l −1 , respectively, with low relative standard deviation, n  = 3 of 0.301–7.45% in milk matrices. The proposed method is very convenient, rapid, cost-effective and environmentally friendly for food analysis.

scholarly journals Application of Packed-nanofibers Solid-phase Extraction for Determination of Rhodamine B in Sausage

2019 ◽  
Vol 8 (1) ◽  
pp. 17-21
Author(s):  
Lanlan Wei ◽  
Jianjun Deng ◽  
Tao Kang ◽  
Xuejun Kang
Keyword(s):  
Rhodamine B ◽  
High Performance ◽  
Orthophosphoric Acid ◽  
Limit Of Detection ◽  
Solid Phase ◽  
Volume Ratio ◽  
Standard Curve ◽  
Relative Standard ◽  
Limit Of Quantitation

A method for the determination of Rhodamine B in sausage was developed and validated. After extraction of Rhodamine B with acetonitrile from foodstuffs, a novel electrospun polymer nanofibers packed micro-column was used for cleaning and concentrating of the analyte in the sample. High performance liquid chromatography with fluorescence detection (HPLC-Flu) was used for the determination of Rhodamine B in the sample. The mobile phase was composed of 3.0 g L-1 phosphate buffer and methanol (3:7, volume ratio), and the pH was adjusted to 7. 0 with orthophosphoric acid. The results showed that the standard curve was linear over the validated concentrations range of 2-500 ng g-1, and the limit of detection (LOD) and the limit of quantitation (LOQ) for Rhodamine B spiked samples was 0. 2 ng g-1 and 0. 7 ng g-1, respectively. The average recoveries of Rhodamine B were 90.4% -94.3% for sausage, and the relative standard deviation of the method was from 1.7% to 3.8%. This proposed method was applied to real sample, and there was no Rhodamine B found in sausage.

scholarly journals Development of Membrane Hollow Fiber for Determination of Maleic Anhydride in Ambient Air as a Field Sampler

2019 ◽  
Vol 63 (7) ◽  
pp. 797-805
Author(s):  
Ehsan Partovi ◽  
Abdulrahman Bahrami ◽  
Abbas AfKhami ◽  
Farshid Ghorbani Shahna ◽  
Farhad Ghamari ◽  
...  
Keyword(s):  
Maleic Anhydride ◽  
Flow Rate ◽  
Hollow Fiber ◽  
Limit Of Detection ◽  
Ambient Air ◽  
Average Concentration ◽  
Breakthrough Volume ◽  
Relative Standard ◽  
Limit Of Quantitation

Abstract This research develops a rapid method for sampling and analysis of maleic anhydride (MA) in air using a one-step hollow fiber (HF) membrane in the liquid phase followed by high-performance liquid chromatography. A sampling chamber was prepared for sampling of MA with HF-supported de-ionized water absorbency. Several important parameters, such as sampling flow rate, sampling time, and breakthrough volume (BTV), were optimized at different concentrations using a central composite design. The results showed that sampling could be performed at the maximum period of 4 h with a flow rate of 1 mL min–1 for different concentrations (in the range of 0.05–2 mg m–3). The BTV was 240 mL. The relative standard deviations for the repeatability of interday and intraday were 7–10%, 10%, respectively, and the pooled standard deviation was 0.088. The limit of detection and limit of quantitation values were 0.033 and 0.060 mg m–3, respectively. Moreover, our findings revealed that the samples could be stored in sealed HF flexible plastic tubes in a cover at refrigerator temperature (4°C) for up to 7 days. The HF method was compared with method number 3512 National Institute Occupational Safety and Health for determination of MA. There was a good correlation (R2 = 0.99) between the two methods at a concentration of 0.05 to 2 mg m–3 in the laboratory and the average concentration of MA for both methods was 0.11 mg m–3 in the ambient air at an adhesive manufacturer. Our findings indicated that the proposed HF can act as a reliable, rapid, and effective approach for sampling of MA in workplaces.

Sign in / Sign up

Export Citation Format

Share Document