Assessment of Aedes aegypti (Diptera: Culicidae) Males Flight Ability for SIT Application: Effect of Device Design, Duration of Test, and Male Age

2019 ◽  
Vol 57 (3) ◽  
pp. 824-829 ◽  
Author(s):  
Ariane Dor ◽  
Ana María Maggiani-Aguilera ◽  
Javier Valle-Mora ◽  
J Guillermo Bond ◽  
Carlos F Marina ◽  
...  
Keyword(s):  
Quality Control ◽  
Aedes Aegypti ◽  
Control Method ◽  
Flight Test ◽  
Test Time ◽  
Time Interval ◽  
Flight Ability ◽  
Young Males ◽  
Male Age ◽  
Standard Quality

Abstract The Sterile Insect Technique (SIT) is a pest control method where large numbers of sterile males are released to induce sterility in wild populations. Since a successful SIT application depends on the released sterile males being competitive with wild males, standard quality control tests are a necessary component of any SIT program. Flight ability (ability to fly out from a device) is a reliable indicator of insect quality. Based on previous studies, we developed four new tubular devices constructed with locally available materials to explore their potential as flight test devices for Aedes aegypti (L.) mass-reared males. Males were allowed to fly upwards through a vertical tube, the ones that flew out were considered successful. The effect of male age (0 to 21 d old), test time interval (30 min to 24 h), and the design of the device (40 and 80 cm height and 2 and 3.5 cm diameter) were evaluated. Our devices determined differences in the flight ability of Ae. aegypti males of different ages. During the first minutes, more old males escaped than young males in three out of four types of devices. However, young males reached higher rates of escape in all cases after 24 h. For standard quality control tests, we recommend testing 2- to 3-d-old sexually mature males in the high and narrow device (80 × 2 cm). Further observations for time intervals between 1 and 5 h might be performed to decide the shortest and more representative interval to use.

scholarly journals Male Age Influences Re-mating Incidence and Sperm Use in Females of the Dengue Vector Aedes aegypti

2021 ◽  
Vol 12 ◽  
Author(s):  
Juliana Agudelo ◽  
Catalina Alfonso-Parra ◽  
Frank W. Avila
Keyword(s):  
Aedes Aegypti ◽  
Population Control ◽  
Age Groups ◽  
Young Male ◽  
Protein Composition ◽  
Young Males ◽  
Male Age ◽  
Control Programs ◽  
Age Related ◽  
Rival Male

Diseases transmitted by female Aedes aegypti mosquitoes are public health issues in countries in the tropics and sub-tropics. As in other insects, A. aegypti females undergo behavioral and physiological changes upon mating that principally act to facilitate the production of progeny. The primary effectors of A. aegypti female post-mating responses are male-derived seminal proteins that are transferred to females during mating. Increased male age reduces ejaculate function in numerous taxa and alters seminal protein composition in Drosophila melanogaster, but the impacts of male age on female A. aegypti post-mating responses are unknown. Here, we used “old” (21–22 days old) and “young” (4–5 days old) A. aegypti males to assess the influence of male age on oviposition, fertility, and re-mating incidence in their mates. We also examined how age influenced paternity share in females initially mated to young or old males that subsequently re-mated with a transgenic male that transferred RFP-labeled sperm and whose progeny inherited a larval-expressed GFP marker. We found that increased male age had no effect on female fecundity or fertility but significantly impacted their ability to prevent re-mating in their mates—more than half (54.5%) of the females mated to an old male re-mated, compared to 24% of females initially mated to a young male. Polyandrous A. aegypti females displayed first male precedence regardless of the age of their initial mate. However, young males were better able to compete with rival male sperm, siring significantly more progeny (77%) compared to old males (64%). Young males had significantly more sperm in their seminal vesicles than old males at the time of mating, although males of both age groups transferred similar numbers of sperm to their mates. Our results suggest that male senescence differentially impacts the induction of some post-mating changes in A. aegypti females. As the effect of age may be further exacerbated in the field, age-related declines in male ability to induce sexual refractoriness have implications for A. aegypti population control programs that release adults into the environment.

Perencanaan Pengendalian Kualitas Produk Pakaian Bayi dengan Metode Six Sigma Pada CV. AGP

JEMAP ◽  
2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Albertus Reynaldo Kurniawan ◽  
Bayu Prestianto
Keyword(s):  
Quality Control ◽  
Continuous Improvement ◽  
Six Sigma ◽  
Screen Printing ◽  
Control Method ◽  
Operational Performance ◽  
Machine Maintenance ◽  
Quality Product ◽  
Break Time ◽  
And Control

Quality control becomes an important key for companies in suppressing the number of defective produced products. Six Sigma is a quality control method that aims to minimize defective products to the lowest point or achieve operational performance with a sigma value of 6 with only yielding 3.4 defective products of 1 million product. Stages of Six Sigma method starts from the DMAIC (Define, Measure, Analyze, Improve and Control) stages that help the company in improving quality and continuous improvement. Based on the results of research on baby clothes products, data in March 2018 the percentage of defective products produced reached 1.4% exceeding 1% tolerance limit, with a Sigma value of 4.14 meaning a possible defect product of 4033.39 opportunities per million products. In the pareto diagram there were 5 types of CTQ (Critical to Quality) such as oblique obras, blobor screen printing, there is a fabric / head cloth code on the final product, hollow fabric / thin fabric fiber, and dirty cloth. The factors caused quality problems such as Manpower, Materials, Environtment, and Machine. Suggestion for consideration of company improvement was continuous improvement on every existing quality problem like in Manpower factor namely improving comprehension, awareness of employees in producing quality product and improve employee's accuracy, Strength Quality Control and give break time. Materials by making the method of cutting the fabric head, the Machine by scheduling machine maintenance and the provision of needle containers at each employees desk sewing and better environtment by installing exhaust fan and renovating the production room.

Chemical Fingerprint Analysis and Simultaneous Determination of Nucleosides and Amino Acids in Kang Fu Xin Liquid by High Performance Liquid Chromatography with Diode Array Detector

2020 ◽  
Vol 16 (7) ◽  
pp. 831-843
Author(s):  
Yuwen Wang ◽  
Shuping Li ◽  
Liuhong Zhang ◽  
Shenglan Qi ◽  
Huida Guan ◽  
...  
Keyword(s):  
Amino Acids ◽  
Quality Control ◽  
Uric Acid ◽  
Control Method ◽  
Principal Component ◽  
Gradient Elution ◽  
Hplc Method ◽  
Array Detector ◽  
Fingerprint Analysis ◽  
Wavelength Switching

Background and Objective: Kang Fu Xin liquid (KFX) is an official preparation made from the ethanol extract product from P. Americana. The present quality control method cannot control the quality of the preparation well. The aim of the present study is to establish a convenient HPLC method for multicomponents determination combined with fingerprint analysis for quality control of KFX. Methods: An HPLC-DAD method with gradient elution and detective wavelength switching program was developed to establish HPLC fingerprints of KFX, and 38 batches of KFX were compared and evaluated by similarity analysis (SA), hierarchical clustering analysis (HCA), and principal component analysis (PCA). Meanwhile, six nucleosides and three amino acids, including uracil, hypoxanthine, uric acid, adenosine, xanthine, inosine, tyrosine, phenylalanine and tryptophan in KFX were determined based on the HPLC fingerprints. Results: An HPLC method assisted with gradient elution and wavelength switching program was established and validated for multicomponents determination combined with fingerprint analysis of KFX. The results demonstrated that the similarity values of the KFX samples were more than 0.845. PCA indicated that peaks 4 (hypoxanthine), 7 (xanthine), 9 (tyrosine), 11, 13 and 17 might be the characteristic contributed components. The nine constituents in KFX, uracil, hypoxanthine, uric acid, adenosine, xanthine, inosine, tyrosine, phenylalanine and tryptophan, showed good regression (R2 > 0.9997) within test ranges and the recoveries of the method for all analytes were in the range from 96.74 to 104.24%. The limits of detections and quantifications for nine constituents in DAD were less than 0.22 and 0.43 μg•mL-1, respectively. Conclusion: The qualitative analysis of chemical fingerprints and the quantitative analysis of multiple indicators provide a powerful and rational way to control the KFX quality for pharmaceutical companies.

scholarly journals Correlation of head-up tilt table test time interval with risk of recurrent syncope

2015 ◽  
Vol 67 ◽  
pp. S77
Author(s):  
R.K. Gokhroo ◽  
Kumari Priti ◽  
A. Avinash ◽  
Bhanwar Lal Ranwa ◽  
Kamal Kishor ◽  
...  
Keyword(s):  
Test Time ◽  
Time Interval ◽  
Tilt Table Test ◽  
Tilt Table ◽  
Head Up Tilt

scholarly journals Development and Validation of a GMP-Compliant High-Pressure Liquid Chromatography Method for the Determination of the Chemical and Radiochemical Purity of [18F]PSMA-1007, a PET Tracer for the Imaging of Prostate Cancer

2021 ◽  
Vol 14 (3) ◽  
pp. 188
Author(s):  
Ines Katzschmann ◽  
Heike Marx ◽  
Klaus Kopka ◽  
Ute Hennrich
Keyword(s):  
Prostate Cancer ◽  
Quality Control ◽  
Radiochemical Purity ◽  
Control Method ◽  
Solid Phase ◽  
Hplc Method ◽  
Attractive Alternative ◽  
Chromatography Method ◽  
Pet Tracer

For the PET imaging of prostate cancer, radiotracers targeting the prostate-specific membrane antigen (PSMA) are nowadays used in clinical practice. [18F]PSMA-1007, a radiopharmaceutical labeled with fluorine-18, has excellent properties for the detection of prostate cancer. Essential for the human use of a radiotracer is its production and quality control under GMP-compliance. For this purpose, all analytical methods have to be validated. [18F]PSMA-1007 is easily radiosynthesized in a one-step procedure and isolated using solid phase extraction (SPE) cartridges followed by formulation of a buffered injection solution and for the determination of its chemical and radiochemical purity a robust, fast and reliable quality control method using radio-HPLC is necessary. After development and optimizations overcoming problems in reproducibility, the here described radio-HPLC method fulfills all acceptance criteria—for e.g., specificity, linearity, and accuracy—and is therefore well suited for the routine quality control of [18F]PSMA-1007 before release of the radiopharmaceutical. Recently a European Pharmacopeia monograph for [18F]PSMA-1007 was published suggesting a different radio-HPLC method for the determination of its chemical and radiochemical purity. Since the here described method has certain advantages, not least of all easier technical implementation, it can be an attractive alternative to the monograph method. The here described method was successfully validated on several radio-HPLC systems in our lab and used for the analysis of more than 60 batches of [18F]PSMA-1007. Using this method, the chemical and radiochemical purity of [18F]PSMA-1007 can routinely be evaluated assuring patient safety.

scholarly journals A Reliable, Label Free Quality Control Method for the Production of DNA Microarrays with Clinical Applications

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 340
Author(s):  
Elisa Chiodi ◽  
Francesco Damin ◽  
Laura Sola ◽  
Lucia Ferraro ◽  
Dario Brambilla ◽  
...  
Keyword(s):  
Quality Control ◽  
Dna Microarrays ◽  
Control Method ◽  
False Negative ◽  
Label Free ◽  
Negative Results ◽  
System A ◽  
Quality Control Method ◽  
False Negative Results ◽  
Imaging Sensor

The manufacture of a very high-quality microarray support is essential for the adoption of this assay format in clinical routine. In fact, poorly surface-bound probes can affect the diagnostic sensitivity or, in worst cases, lead to false negative results. Here we report on a reliable and easy quality control method for the evaluation of spotted probe properties in a microarray test, based on the Interferometric Reflectance Imaging Sensor (IRIS) system, a high-resolution label free technique able to evaluate the variation of the mass bound to a surface. In particular, we demonstrated that the IRIS analysis of microarray chips immediately after probe immobilization can detect the absence of probes, which recognizably causes a lack of signal when performing a test, with clinical relevance, using fluorescence detection. Moreover, the use of the IRIS technique allowed also to determine the optimal concentration of the probe, that has to be immobilized on the surface, to maximize the target recognition, thus the signal, but to avoid crowding effects. Finally, through this preliminary quality inspection it is possible to highlight differences in the immobilization chemistries. In particular, we have compared NHS ester versus click chemistry reactions using two different surface coatings, demonstrating that, in the diagnostic case used as an example (colorectal cancer) a higher probe density does not reflect a higher binding signal, probably because of a crowding effect.

scholarly journals A Two-Stage Quality Control Method for 2-m Temperature Observations Using Biweight Means and a Progressive EOF Analysis

2013 ◽  
Vol 141 (2) ◽  
pp. 798-808 ◽  
Author(s):  
Zhifang Xu ◽  
Yi Wang ◽  
Guangzhou Fan
Keyword(s):  
Quality Control ◽  
Control Method ◽  
Control Process ◽  
Lapse Rate ◽  
Systematic Bias ◽  
Eof Analysis ◽  
Two Stage ◽  
Quality Control Method ◽  
Quality Control Process ◽  
The Difference

Abstract The relatively smooth terrain embedded in the numerical model creates an elevation difference against the actual terrain, which in turn makes the quality control of 2-m temperature difficult when forecast or analysis fields are utilized in the process. In this paper, a two-stage quality control method is proposed to address the quality control of 2-m temperature, using biweight means and a progressive EOF analysis. The study is made to improve the quality control of the observed 2-m temperature collected by China and its neighboring areas, based on the 6-h T639 analysis from December 2009 to February 2010. Results show that the proposed two-stage quality control method can secure the needed quality control better, compared with a regular EOF quality control process. The new method is, in particular, able to remove the data that are dotted with consecutive errors but showing small fluctuations. Meanwhile, compared with the lapse rate of temperature method, the biweight mean method is able to remove the systematic bias generated by the model. It turns out that such methods make the distributions of observation increments (the difference between observation and background) more Gaussian-like, which ensures the data quality after the quality control.

Sign in / Sign up

Export Citation Format

Share Document