scholarly journals Evidence for oxygenation of Fe-Mg oxides at mid-mantle conditions and the rise of deep oxygen

2020 ◽  
Author(s):  
Jin Liu ◽  
Chenxu Wang ◽  
Chaojia Lv ◽  
Xiaowan Su ◽  
Yijin Liu ◽  
...  
Keyword(s):  
Ex Situ ◽  
Excess Oxygen ◽  
Iron Core ◽  
Ambient Conditions ◽  
Core Mantle Boundary ◽  
Saturated Water ◽  
Transmission Electron ◽  
Oxygen Excess ◽  
Excess Phase ◽  
Hematite Fe2o3

Abstract As the reaction product of subducted water and the iron core, FeO2 with more oxygen than hematite (Fe2O3) has been recently recognized as an important component in the D” layer just above the Earth's core-mantle boundary. Here, we report a new oxygen-excess phase (Mg, Fe)2O3+δ (0 < δ < 1, denoted as ‘OE-phase’). It forms at pressures greater than 40 gigapascal when (Mg, Fe)-bearing hydrous materials are heated over 1500 kelvin. The OE-phase is fully recoverable to ambient conditions for ex situ investigation using transmission electron microscopy, which indicates that the OE-phase contains ferric iron (Fe3+) as in Fe2O3 but holds excess oxygen through interactions between oxygen atoms. The new OE-phase provides strong evidence that H2O has extraordinary oxidation power at high pressure. Unlike the formation of pyrite-type FeO2Hx which usually requires saturated water, the OE-phase can be formed with under-saturated water at mid-mantle conditions, and is expected to be more ubiquitous at depths greater than 1000 km in the Earth's mantle. The emergence of oxygen-excess reservoirs out of primordial or subducted (Mg, Fe)-bearing hydrous materials may revise our view on the deep-mantle redox chemistry.

Transmission Electron Microscopy of Epitaxial silicides grown by ultra high vacuum deposition

1989 ◽  
Vol 47 ◽  
pp. 462-463
Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Diffraction ◽  
High Vacuum ◽  
High Energy ◽  
Energy Electron ◽  
Ultra High Vacuum ◽  
Ex Situ ◽  
Transmission Electron

The silicides CoSi2 and NiSi2 are both metallic with the fee flourite structure and lattice constants which are close to silicon (1.2% and 0.6% smaller at room temperature respectively) Consequently epitaxial cobalt and nickel disilicide can be grown on silicon. If these layers are formed by ultra high vacuum (UHV) deposition (also known as molecular beam epitaxy or MBE) their thickness can be controlled to within a few monolayers. Such ultrathin metal/silicon systems have many potential applications: for example electronic devices based on ballistic transport. They also provide a model system to study the properties of heterointerfaces. In this work we will discuss results obtained using in situ and ex situ transmission electron microscopy (TEM).In situ TEM is suited to the study of MBE growth for several reasons. It offers high spatial resolution and the ability to penetrate many monolayers of material. This is in contrast to the techniques which are usually employed for in situ measurements in MBE, for example low energy electron diffraction (LEED) and reflection high energy electron diffraction (RHEED), which are both sensitive to only a few monolayers at the surface.

A New Method of Wafer Level Plan View TEM Sample Preparation by DualBeam

2008 ◽  
Author(s):  
Hyoung H. Kang ◽  
Michael A. Gribelyuk ◽  
Oliver D. Patterson ◽  
Steven B. Herschbein ◽  
Corey Senowitz
Keyword(s):  
Sample Preparation ◽  
Ex Situ ◽  
Wafer Level ◽  
Cross Sectional ◽  
Plan View ◽  
Manufacturing Line ◽  
Transmission Electron ◽  
Thin Lamella ◽  
Preparation Techniques

Abstract Cross-sectional style transmission electron microscopy (TEM) sample preparation techniques by DualBeam (SEM/FIB) systems are widely used in both laboratory and manufacturing lines with either in-situ or ex-situ lift out methods. By contrast, however, the plan view TEM sample has only been prepared in the laboratory environment, and only after breaking the wafer. This paper introduces a novel methodology for in-line, plan view TEM sample preparation at the 300mm wafer level that does not require breaking the wafer. It also presents the benefit of the technique on electrically short defects. The methodology of thin lamella TEM sample preparation for plan view work in two different tool configurations is also presented. The detailed procedure of thin lamella sample preparation is also described. In-line, full wafer plan view (S)TEM provides a quick turn around solution for defect analysis in the manufacturing line.

scholarly journals Dual Electrochemical Treatments to Improve Properties of Ti6Al4V Alloy

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2479
Author(s):  
Stefano Rossi ◽  
Luciana Volgare ◽  
Carine Perrin-Pellegrino ◽  
Carine Chassigneux ◽  
Erick Dousset ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Combined Treatment ◽  
Amorphous Film ◽  
Amorphous Layer ◽  
Good Alternative ◽  
Surface Treatments ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Fluid Environment

Surface treatments are considered as a good alternative to increase biocompatibility and the lifetime of Ti-based alloys used for implants in the human body. The present research reports the comparison of bare and modified Ti6Al4V substrates on hydrophilicity and corrosion resistance properties in body fluid environment at 37 °C. Several surface treatments were conducted separately to obtain either a porous oxide layer using nanostructuration (N) in ethylene glycol containing fluoride solution, or bulk oxide thin films through heat treatment at 450 °C for 3 h (HT), or electrochemical oxidation at 1 V for 3 h (EO), as well as combined treatments (N-HT and N-EO). In-situ X-ray diffraction and ex-situ transmission electron microscopy have shown that heat treatment gave first rise to the formation of a 30 nm thick amorphous layer which crystallized in rutile around 620 °C. Electrochemical oxidations gave rise to a 10 nm thick amorphous film on the top of the surface (EO) or below the amorphous nanotube layer (N-EO). Dual treated samples presented similar results with a more stable behavior for N-EO. Finally, for both corrosion and hydrophilicity points of view, the new combined treatment to get a total amorphous N-EO sample seems to be the best and even better than the partially crystallized N-HT sample.

scholarly journals Effects of Recycled Fe2O3 Nanofiller on the Structural, Thermal, Mechanical, Dielectric, and Magnetic Properties of PTFE Matrix

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2332
Author(s):  
Ahmad Mamoun Khamis ◽  
Zulkifly Abbas ◽  
Raba’ah Syahidah Azis ◽  
Ebenezer Ekow Mensah ◽  
Ibrahim Abubakar Alhaji
Keyword(s):  
Electron Microscopy ◽  
High Energy ◽  
Filler Loading ◽  
Complex Permeability ◽  
X Ray Diffraction ◽  
Thermal Expansion Coefficients ◽  
Transmission Electron ◽  
Energy Ball ◽  
Hematite Fe2o3 ◽  
Ptfe Composites

The purpose of this study was to improve the dielectric, magnetic, and thermal properties of polytetrafluoroethylene (PTFE) composites using recycled Fe2O3 (rFe2O3) nanofiller. Hematite (Fe2O3) was recycled from mill scale waste and the particle size was reduced to 11.3 nm after 6 h of high-energy ball milling. Different compositions (5–25 wt %) of rFe2O3 nanoparticles were incorporated as a filler in the PTFE matrix through a hydraulic pressing and sintering method in order to fabricate rFe2O3–PTFE nanocomposites. The microstructure properties of rFe2O3 nanoparticles and the nanocomposites were characterized through X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and high-resolution transmission electron microscopy (HRTEM). The thermal expansion coefficients (CTEs) of the PTFE matrix and nanocomposites were determined using a dilatometer apparatus. The complex permittivity and permeability were measured using rectangular waveguide connected to vector network analyzer (VNA) in the frequency range 8.2–12.4 GHz. The CTE of PTFE matrix decreased from 65.28×10−6/°C to 39.84×10−6/°C when the filler loading increased to 25 wt %. The real (ε′) and imaginary (ε″) parts of permittivity increased with the rFe2O3 loading and reached maximum values of 3.1 and 0.23 at 8 GHz when the filler loading was increased from 5 to 25 wt %. A maximum complex permeability of 1.1−j0.07 was also achieved by 25 wt % nanocomposite at 10 GHz.

A Comparison of in- and ex-situ Shear Bands in Metallic Glass by Transmission Electron Microsopy

2021 ◽  
Author(s):  
Harald Rösner ◽  
Christian Kübel ◽  
Stefan Ostendorp ◽  
Gerhard Wilde
Keyword(s):  
Metallic Glass ◽  
Shear Bands ◽  
Ex Situ ◽  
Transmission Electron

Initial Dynamic Susceptibility of Maghemite Nanoparticles Dispersed in Surface-Treated Polymeric Template

2021 ◽  
Vol 21 (11) ◽  
pp. 5694-5697
Author(s):  
A. F. R. Rodriguez ◽  
R. F. Lacerda ◽  
L. E. Maggi ◽  
Hory Mohammadpour ◽  
Mohammad Niyaifar ◽  
...  
Keyword(s):  
Ex Situ ◽  
Transmission Electron Microscopy Data ◽  
Dynamic Susceptibility ◽  
Maghemite Nanoparticles ◽  
X Ray Diffraction ◽  
Chemical Treatments ◽  
Dynamical Susceptibility ◽  
Transmission Electron ◽  
Microscopy Data ◽  
Polymeric Template

Magnetic nanocomposites based on maghemite nanoparticles supported (ex situ route) on styrene- divinilbenzene (Sty-DVB) copolymer templates were produced and characterized for their structure and morphology. The as-produced nanocomposites were further chemically-treated with different oxidant agents and surface-coated with stearic acid. X-ray diffraction and transmission electron microscopy data show that the incorporated nanoparticles are preserved despite the aggressive chemical treatments employed. From the dynamical susceptibility measurements performed on the nanocomposites, the values of the saturation magnetization (76 emu/g) and the effective magnetic anisotropy (1.7 × 104 J/m3) were obtained, in excellent agreement with the values reported in the literature for maghemite. This finding strongly supports the preservation of the magnetic properties of the supported nanosized maghemite throughout the entire samples’ processing.

Size dependent behavior of Fe3O4crystals during electrochemical (de)lithiation: an in situ X-ray diffraction, ex situ X-ray absorption spectroscopy, transmission electron microscopy and theoretical investigation

2017 ◽  
Vol 19 (31) ◽  
pp. 20867-20880 ◽  
Author(s):  
David C. Bock ◽  
Christopher J. Pelliccione ◽  
Wei Zhang ◽  
Janis Timoshenko ◽  
K. W. Knehr ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Structural Changes ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
X Ray ◽  
Size Dependent ◽  
Transmission Electron ◽  
Dependent Behavior ◽  
X Ray Absorption

Crystal and atomic structural changes of Fe3O4upon electrochemical (de)lithiation were determined.

Sign in / Sign up

Export Citation Format

Share Document