Effects of Temperature and Moisture on Conidia Germination, Infection and Acervulus Formation of Apple Marssonina Leaf Blotch Pathogen (Diplocarpon mali) in China

Plant Disease ◽  
2020 ◽  
Author(s):  
Sen Lian ◽  
Xiang-li Dong ◽  
Pingliang Li ◽  
Caixia Wang ◽  
shanyue zhou ◽  
...  
Keyword(s):  
Severe Disease ◽  
Infection Process ◽  
Effect Of Temperature ◽  
Leaf Wetness ◽  
Leaf Blotch ◽  
Dry Conditions ◽  
Conidium Germination ◽  
Effects Of Temperature ◽  
Epidemic Development ◽  
Diplocarpon Mali

Apple marssonina leaf blotch (Diplocarpon mali) is a severe disease of apple that mainly causes premature leaf defoliation in many apple growing areas in the word. Its epidemic development is closely related to temperature and rainfall. The effects of temperature and moisture on conidium germination, infection on leaves, and acervulus production were investigated under controlled environments. Temperature required for conidium germination and infection ranged from 5 oC to 30 oC with the optimum around 23 oC, and temperature required for acervulus formation was slightly wider with the optimum at 24.6 oC. Wetness was needed for conidia to germinate and infect; only few conidia germinated at RH=100%. However, lesions can produce acervuli in dry conditions. The minimum duration of leaf wetness required for conidia to complete the entire infection process were 14, 8, 4, and 6 hours at 10, 15, 20, and 25°C, respectively. A model describing the effect of temperature and leaf wetness duration was built. The model estimated that conidial infection has the optimum temperature at 22.6°C and the minimum wetness duration required of 4.8 hours. The model can be used to forecast the conidial infection of D. mali to assist in disease management in commercial apple production.

scholarly journals Effects of Temperature and Moisture on Sporulation and Infection by Pseudoperonospora cubensis

Plant Disease ◽  
2017 ◽  
Vol 101 (4) ◽  
pp. 562-567 ◽  
Author(s):  
Shiling Sun ◽  
Sen Lian ◽  
Shulian Feng ◽  
Xiangli Dong ◽  
Caixian Wang ◽  
...  
Keyword(s):  
Relative Humidity ◽  
Downy Mildew ◽  
Weibull Model ◽  
Infection Process ◽  
Effect Of Temperature ◽  
Effective Control ◽  
Pseudoperonospora Cubensis ◽  
Cucumber Downy Mildew ◽  
Effects Of Temperature ◽  
Modified Weibull

Cucumber downy mildew, caused by Pseudoperonospora cubensis, is a worldwide disease that causes severe damage to cucumber production. The effects of temperature and moisture on sporulation and infection by P. cubensis were investigated by inoculating cucumber (‘85F12’) cotyledons with sporangia and examining the sporangia produced on the inoculated cotyledons under artificially controlled environments. The result showed that the temperature required for sporangium infection by P. cubensis and sporulation of the downy mildew lesions occurred at 5 to 30°C. The optimal temperature estimated by the fitted model was 18.8°C for sporangium infection and 16.2°C for downy mildew lesion sporulation. The pathogen formed plenty of sporangia when disease cotyledons were wetted or in the environment with relative humidity = 100%. The downy mildew lesions produced only a few sporangia when placed in the environment with relative humidity = 90%. The inoculated cotyledons, which incubated for 5 days at about 20°C in a dry greenhouse, began to form sporangia 4 h after being wetted when incubated in darkness. The quantity of sporangia produced on the downy mildew lesions increased with extension of incubating period (within 12 h), and the relationship between produced sporangia and the incubation period at 15, 20, and 25°C can be described by three exponential models. The observed minimum wetness durations (MWD) required for sporangia to complete the infection process and cause downy mildew were 12, 4, 2.5, 1, 1, and 6 h for 5, 10, 15, 20, 25, and 30°C, respectively. The effect of temperature and wetness duration on infection by sporangia of P. cubensis can be described by the modified Weibull model. The shortest MWD was 0.45 h, about 27 min, estimated by model. The experimental data and models will be helpful in the development of forecasting models and effective control systems for cucumber downy mildew.

scholarly journals Survival, Germination, and Growth of Epichloë typhina and Significance of Leaf Wounds and Insects in Infection of Orchardgrass

Plant Disease ◽  
2013 ◽  
Vol 97 (3) ◽  
pp. 323-328 ◽  
Author(s):  
Stephen C. Alderman
Keyword(s):  
Water Potential ◽  
Infection Process ◽  
Effect Of Temperature ◽  
Ascospore Germination ◽  
Eriophyid Mites ◽  
Epichloë Typhina ◽  
Dry Conditions ◽  
Significant Yield ◽  
Germination And Growth ◽  
Germ Tubes

Epichloë typhina is an important stroma-producing endophytic ascomycete that is responsible for significant yield loss in orchardgrass (Dactylis glomerata) seed production fields. Infection is presumed to occur through leaves or stems, although details of the infection process and conditions that favor leaf infection are not well understood. The primary objectives of this study were to investigate the early stages of infection, including the effect of temperature or water potential on ascospore germination and subsequent growth of E. typhina, the tolerance of ascospores to desiccation, the requirement of leaf wounds for infection of orchardgrass by E. typhina, and the potential for insects to facilitate infection. Ascospores tolerated dry conditions, with at least 40% surviving 12 days under desiccation. Germination and growth of E. typhina was greatest at 25°C, with little to no growth at 5 and 35°C. Mycelial growth decreased with decreasing water potential from –0.3 to –10 MPa. Ascospore germination on leaves was predominantly hyphal at wound sites and iterative (conidiogenous) at sites without wounds. E. typhina typically entered leaves through wounds. Direct penetration was rarely observed and appeared to be associated with ascospore clusters. Germ tubes were significantly longer at sites with honeydew deposits from the bird cherry–oat aphid than at sites without honeydew. Growth of E. typhina was also observed at feeding sites of eriophyid mites, suggesting that leaf-wounding or sap-excreting insects support epiphyllous growth of E. typhina on leaves.

Effect of temperature during the synthesis process of CdSe nanoparticles using the colloidal technique

MRS Advances ◽  
2020 ◽  
Vol 5 (63) ◽  
pp. 3389-3395
Author(s):  
R. González-Díaz ◽  
D. Fernández-Sánchez ◽  
P. Rosendo-Francisco ◽  
G. Sánchez-Legorreta
Keyword(s):  
Scanning Tunneling Microscope ◽  
Electron Cloud ◽  
Cdse Nanoparticles ◽  
Effect Of Temperature ◽  
Synthesis Process ◽  
Scanning Tunneling ◽  
Tunneling Microscope ◽  
First Results ◽  
Effects Of Temperature ◽  
Scanning Electron

AbstractIn this work, the first results of the effects of temperature during the production of Se2- ions and the effect during the interaction of Cd2+ and Se2- ions in the synthesis process of CdSe nanoparticles are presented. The synthesis of CdSe was carried out by the colloidal technique, in the first one we used a temperature of 63 °C to produce Se2- ions and in the second one an interaction temperature of 49 °C. The samples were characterized using a Scanning Electron Microscope (SEM) and a Scanning Tunneling Microscope (STM). From the SEM micrographs it was possible to identify the thorns formation and irregular islands. STM micrographs reveal elliptical shapes with a regular electron cloud profile.

scholarly journals The Effect of Temperature and Humidity May Reduce the Growth Rate of the Coronavirus Disease 2019 Epidemic

2020 ◽  
Author(s):  
Lei Qin ◽  
Qiang Sun ◽  
Jiani Shao ◽  
Yang Chen ◽  
Xiaomei Zhang ◽  
...  
Keyword(s):  
Growth Rate ◽  
Relative Humidity ◽  
Effect Of Temperature ◽  
Average Temperature ◽  
Temperature And Humidity ◽  
Scatter Plots ◽  
Low Humidity ◽  
Average Relative Humidity ◽  
Effects Of Temperature ◽  
The Relationship

Abstract Background: The effects of temperature and humidity on the epidemic growth of coronavirus disease 2019 (COVID-19)remains unclear.Methods: Daily scatter plots between the epidemic growth rate (GR) and average temperature (AT) or average relative humidity (ARH) were presented with curve fitting through the “loess” method. The heterogeneity across days and provinces were calculated to assess the necessity of using a longitudinal model. Fixed effect models with polynomial terms were developed to quantify the relationship between variations in the GR and AT or ARH.Results: An increased AT dramatically reduced the GR when the AT was lower than −5°C, the GR was moderately reduced when the AT ranged from −5°C to 15°C, and the GR increased when the AT exceeded 15°C. An increasedARH increased theGR when the ARH was lower than 72% and reduced theGR when the ARH exceeded 72%.Conclusions: High temperatures and low humidity may reduce the GR of the COVID-19 epidemic. The temperature and humidity curves were not linearly associated with the COVID-19 GR.

Enhanced thermoelectric performance of layered SnS crystals: the synergetic effect of temperature and carrier concentration

RSC Advances ◽  
2015 ◽  
Vol 5 (69) ◽  
pp. 56382-56390 ◽  
Author(s):  
Bao-Zhen Sun ◽  
Zuju Ma ◽  
Chao He ◽  
Kechen Wu
Keyword(s):  
Carrier Concentration ◽  
Synergetic Effect ◽  
Thermoelectric Performance ◽  
Effect Of Temperature ◽  
Effects Of Temperature

The synergistic deployment of the effects of temperature and carrier concentration raises the ZT of SnS to a high value (1.61 ± 0.02).

scholarly journals Studies in the geotropism of the pteridophyta V—Some effects of temperature on growth and geotropism in Asplenium bulbiferium

1935 ◽  
Vol 116 (800) ◽  
pp. 479-493 ◽  
Keyword(s):  
Growth Rate ◽  
Effect Of Temperature ◽  
Horizontal Position ◽  
Present Position ◽  
Minimum Period ◽  
Plant Life ◽  
Latent Time ◽  
Presentation Time ◽  
Effects Of Temperature ◽  
The Given

Although temperature and gravity both influence plant life, and although both factors have been studied for many decades, there is surprisingly little literature decades, there is surprisingly little literature dealing with the relation between the two; and none, so far as I can discover, on the effect in any Pteridophyte. Navez (1929) who criticized the work of some investigators on the effect of temperature on the geotropism of a few seedlings, sums up the present position in his remark that the conclusions of workers are very different and often in opposition. The present paper gives the results of 1100 experiments carried out mainly between the years 1922 and 1927, and though it is realized that much remains to be done on the question, it is believed that the results which have been obtained are of some value. For general methods, reference may be made to previous “Studies” in this series. Geotropic sensitivity, as measured by presentation time at different stages in development of the frond, was fully worked out by Waight (1923) for 20°C, and is adopted here as a standard of reference. The growth rate recorded in the tables is that for the particular frond under investigation, or is the average of the fronds examined during the day of the experiment. Nearly all the experiments included in the tables were conducted during the months of April-October, as I have since been able to show that there is an annual rhythm in geotropic irritability. A decrease in sensitivity occurs in winter, and hence experiments performed in November-March are not strictly comparable with those carried out in the summer. The following abbreviations are used:- P.S. = period of stimulation. P.T. = presentation time, i. e ., the minimum period of stimulation in a horizontal position, which, under the given conditions, will cause a movement of approximately 5° in about 80% of the fronds. L.T. = latent time (Prankerd, 1925) in hours. N = “normal time,” i. e ., the P.T. For different stages of the frond at 20°C (see Waight, 1923).

scholarly journals Effect of Temperature and Moisture Period on Infection of Rhododendron ‘Cunningham's White’ by Phytophthora ramorum

2009 ◽  
Vol 99 (9) ◽  
pp. 1045-1052 ◽  
Author(s):  
Paul W. Tooley ◽  
Marsha Browning ◽  
Kerrie L. Kyde ◽  
Dana Berner
Keyword(s):  
The United States ◽  
Phytophthora Ramorum ◽  
Effect Of Temperature ◽  
Optimum Temperature ◽  
Detached Leaf ◽  
Wide Range ◽  
Effects Of Temperature ◽  
Gradient Plate ◽  
Whole Plants ◽  
Moisture Conditions

We investigated the temperature and moisture conditions that allow Phytophthora ramorum to infect Rhododendron ‘Cunningham's White’. Most experiments were performed with a single P. ramorum isolate from the NA1 clonal lineage. For whole plants incubated in dew chambers at 10 to 31°C, the greatest proportion of diseased leaves, 77.5%, occurred at the optimum temperature of 20.5°C. Disease occurred over the entire range of temperatures tested, although amounts of disease were minor at the temperature extremes. For whole plants exposed to varying dew periods at 20°C and then incubated at 20°C for 7 days, a dew period as short as 1 h resulted in a small amount of disease; however, at least 4 h of dew were required for >10% of the leaves to become diseased. Moisture periods of 24 and 48 h resulted in the greatest number of diseased leaves. In detached-leaf, temperature-gradient-plate experiments, incubation at 22°C resulted in the greatest disease severity, followed by 18°C and then 14°C. In detached-leaf, moisture-tent experiments, a 1-h moisture period was sufficient to cause disease on 67 to 73% of leaves incubated for 7 days at 20°C. A statistical model for disease development that combined the effects of temperature and moisture period was generated using nonlinear regression. Our results define temperature and moisture conditions which allow infection by P. ramorum on Cunningham's White rhododendron, and show that P. ramorum is able to infect this host over a wide range of temperatures and moisture levels. The results indicate that P. ramorum has the potential to become established in parts of the United States that are outside its current range.

scholarly journals Effects of Temperature and Moisture on the Infection and Development of Apple Fruit Rot Caused by Phytophthora cactorum

Plant Disease ◽  
2018 ◽  
Vol 102 (9) ◽  
pp. 1811-1819 ◽  
Author(s):  
Fang Liu ◽  
Bao-hua Li ◽  
Sen Lian ◽  
Xiang-li Dong ◽  
Cai-xia Wang ◽  
...  
Keyword(s):  
Free Water ◽  
Weibull Model ◽  
Apple Fruit ◽  
Infection Process ◽  
Fruit Rot ◽  
Phytophthora Cactorum ◽  
Optimal Temperature ◽  
Zoospore Release ◽  
Effects Of Temperature

Phytophthora fruit rot, caused by Phytophthora cactorum, is an important disease of apple in China, often causing more than 50% fruit rot in rainy years. We examined the effects of temperature and moisture on the development of the disease and effects of the variables on zoospore release and germination, infection, and lesion development. In vitro, a temperature range of 5 to 20°C had no significant effects on zoospore release dynamics but did significantly affect the quantities of released zoospores. The largest quantity of zoospores was released at 9.9°C according to a fitted model. Zoosporangia released zoospores within 15 min at the test temperatures (0 to 20°C), which peaked at the fourth hour. Zoospores germinated in vitro, requiring free water, at temperatures from 5 to 35°C. The optimum germination temperature was 25.1°C according to a fitted model. The minimum wetness duration required for zoospores to complete the infection process and induce visible lesions on Fuji fruit was 0.40 h at the optimal temperature of 23.0°C according to the fitted model, whereas observed values were 4.5, 1.5, 0.5, 1.5 and 8.5 h at 10, 15, 20, 25, and 30°C, respectively. The number of zoospore infections on fruit at various temperatures and wetness durations were well fitted by the modified Weibull model; based on the model, the optimal temperature for zoospore infections was 23.0°C. Young apple fruit infected by zoospores developed visible lesions from 10 to 30°C, with a predicted optimum of 23.5°C; no lesions developed at 5 or 35°C. The shortest incubation period of the disease was 4 days. These results can be used to develop disease forecasting models for improved fungicide control.

Sign in / Sign up

Export Citation Format

Share Document