scholarly journals A fluid–structure interaction model to characterize bone cell stimulation in parallel-plate flow chamber systems

2013 ◽  
Vol 10 (81) ◽  
pp. 20120900 ◽  
Author(s):  
T. J. Vaughan ◽  
M. G. Haugh ◽  
L. M. McNamara
Keyword(s):  
Shear Stress ◽  
Fluid Flow ◽  
Parallel Plate ◽  
Bone Cells ◽  
Mechanical Stimulus ◽  
Flow Chamber ◽  
Parallel Plate Flow Chamber ◽  
Structure Interaction

Bone continuously adapts its internal structure to accommodate the functional demands of its mechanical environment and strain-induced flow of interstitial fluid is believed to be the primary mediator of mechanical stimuli to bone cells in vivo. In vitro investigations have shown that bone cells produce important biochemical signals in response to fluid flow applied using parallel-plate flow chamber (PPFC) systems. However, the exact mechanical stimulus experienced by the cells within these systems remains unclear. To fully understand this behaviour represents a most challenging multi-physics problem involving the interaction between deformable cellular structures and adjacent fluid flows. In this study, we use a fluid–structure interaction computational approach to investigate the nature of the mechanical stimulus being applied to a single osteoblast cell under fluid flow within a PPFC system. The analysis decouples the contribution of pressure and shear stress on cellular deformation and for the first time highlights that cell strain under flow is dominated by the pressure in the PPFC system rather than the applied shear stress. Furthermore, it was found that strains imparted on the cell membrane were relatively low whereas significant strain amplification occurred at the cell–substrate interface. These results suggest that strain transfer through focal attachments at the base of the cell are the primary mediators of mechanical signals to the cell under flow in a PPFC system. Such information is vital in order to correctly interpret biological responses of bone cells under in vitro stimulation and elucidate the mechanisms associated with mechanotransduction in vivo .

VCAM-1 is more effective than MAdCAM-1 in supporting eosinophil rolling under conditions of shear flow

Blood ◽  
2000 ◽  
Vol 95 (2) ◽  
pp. 592-601 ◽  
Author(s):  
P. Sriramarao ◽  
Richard G. DiScipio ◽  
Ronald R. Cobb ◽  
Myron Cybulsky ◽  
Greg Stachnick ◽  
...  
Keyword(s):  
Monoclonal Antibody ◽  
Parallel Plate ◽  
Cell Adhesion Molecule ◽  
Flow Chamber ◽  
Β1 Integrin ◽  
Vascular Cell Adhesion ◽  
Parallel Plate Flow Chamber ◽  
Vascular Cell

The ability of the 4 integrin counterligands vascular cell adhesion molecule (VCAM)-1 or mucosal addressin (MAd)CAM-1 to support eosinophil rolling or firm adhesion under conditions of physiologic flow has not been delineated. Using a parallel plate flow chamber in vitro and intravital microscopy in vivo, we demonstrate that eosinophil rolling and adhesion on VCAM-1 is mediated by both 4β1 and 4β7 integrins. Eosinophils rolled equally efficiently on both VCAM-1 2 domain and VCAM-1 7 domain, suggesting that the N-terminal 2 domains of VCAM-1 are sufficient to support eosinophil rolling under conditions of flow. Furthermore, activation of the eosinophil β1 integrin with monoclonal antibody (mAb) 8A2 resulted in both resistance to shear stress–induced detachment from VCAM-1 in vitro and in stable arrest of rolling eosinophils on interleukin (IL)-1β–stimulated venules in vivo. Eosinophils rolled less efficiently on MAdCAM-1– than on VCAM-1–coated coverslips under conditions of flow. However, eosinophils firmly adhered as efficiently to MAdCAM-1 as to VCAM-1. Overall, these results demonstrate that both VCAM-1 and MAdCAM-1 can support eosinophil firm adhesion under conditions of flow. In contrast, VCAM-1 is significantly more efficient than MAdCAM-1 in supporting eosinophil rolling under conditions of flow.

Fluid-Structure Interaction Modelling Predicts That Strain Transfer Through Focal Attachments of Osteoblast Cells are the Primary Mediators of Mechanical Stimulation Under Fluid Flow

2013 ◽  
Author(s):  
T. J. Vaughan ◽  
M. G. Haugh ◽  
L. M. McNamara
Keyword(s):  
Fluid Flow ◽  
Mechanical Stimulation ◽  
Interstitial Fluid ◽  
Bone Cells ◽  
Mechanical Stimulus ◽  
Mechanical Stimuli ◽  
Interstitial Fluid Flow ◽  
Interaction Modelling

Bone continuously adapts its internal structure to accommodate the functional demands of its mechanical environment. It has been proposed that indirect strain-induced flow of interstitial fluid surrounding bone cells may be the primary mediator of mechanical stimuli in-vivo [1]. Due to the practical difficulties in ascertaining whether interstitial fluid flow is indeed the primary mediator of mechanical stimuli in the in vivo environment, much of the evidence supporting this theory has been established through in vitro investigations that have observed cellular activity in response to fluid flow imposed by perfusion chambers [2]. While such in vitro experiments have identified key mechanisms involved in the mechanotransduction process, the exact mechanical stimulus being imparted to cells within a monolayer is unknown [3]. Furthermoreit is not clear whether the mechanical stimulation is comparable between different experimental systems or, more importantly, is representative of physiological loading conditions experienced by bone cells in vivo.

Wall Shear Stress Determination in a Small-Scale Parallel Plate Flow Chamber Using Laser Doppler Velocimetry Under Laminar, Pulsatile and Low-Reynolds Number Turbulent Flows

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Hamed Avari ◽  
Kem A. Rogers ◽  
Eric Savory
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Laser Doppler Velocimetry ◽  
Parallel Plate ◽  
Flow Chamber ◽  
Laser Doppler ◽  
Small Scale ◽  
Doppler Velocimetry ◽  
Flow Conditions ◽  
Parallel Plate Flow Chamber

The parallel plate flow chamber (PPFC) has gained popularity due to its applications in fields such as biological tissue engineering. However, most of the studies using PPFC refer to theoretical relations for estimating the wall shear stress (WSS) and, hence, the accuracy of such quantifications remains elusive for anything other than steady laminar flow. In the current study, a laser Doppler velocimetry (LDV) method was used to quantify the flow in a PPFC (H = 1.8 mm × W = 17.5 mm, Dh = 3.26 mm, aspect ratio = 9.72) under steady Re = 990, laminar pulsatile (carotid Re0-mean = 282 as well as a non-zero-mean sinusoidal Re0-mean = 45 pulse) and low-Re turbulent Re = 2750 flow conditions. A mini-LDV probe was applied, and the absolute location of the LDV measuring volume with the respect to the wall was determined using a signal monitoring technique with uncertainties being around ±27 μm. The uniformity of the flow across the span of the channel, as well as the WSS assessment for all the flow conditions, was measured with the uncertainties all being less than 16%. At least two points within the viscous sublayer of the low-Re turbulent flow were measured (with the y+ for the first point < 3) and the WSS was determined using two methods with the differences between the two methods being within 5%. This paper for the first time presents the experimental determination of WSS using LDV in a small-scale PPFC under various flow conditions, the challenges associated with each condition, and a comparison between the cases. The present data will be useful for those conducting biological or numerical modeling studies using such devices.

scholarly journals A Parallel-Plate Flow Chamber for Mechanical Characterization of Endothelial Cells Exposed to Laminar Shear Stress

2015 ◽  
Vol 9 (1) ◽  
pp. 127-138 ◽  
Author(s):  
Andrew K. Wong ◽  
Pierre LLanos ◽  
Nickolas Boroda ◽  
Seth R. Rosenberg ◽  
Sina Y. Rabbany
Keyword(s):  
Endothelial Cells ◽  
Shear Stress ◽  
Parallel Plate ◽  
Mechanical Characterization ◽  
Flow Chamber ◽  
Laminar Shear Stress ◽  
Parallel Plate Flow Chamber ◽  
Laminar Shear

scholarly journals Dimethylsulfoxide exposure modulates HL-60 cell rolling interactions

2012 ◽  
Vol 32 (4) ◽  
pp. 375-382 ◽  
Author(s):  
David J. Gee ◽  
L. Kate Wright ◽  
Jonathan Zimmermann ◽  
Kayla Cole ◽  
Karen Soule ◽  
...  
Keyword(s):  
Shear Stress ◽  
Cell Surface ◽  
Morphological Changes ◽  
Flow Cytometric Analysis ◽  
Fold Increase ◽  
Flow Chamber ◽  
Granulocytic Differentiation ◽  
Rolling Velocity

Human leukaemic HL-60 cells are widely used for studying interactions involving adhesion molecules [e.g. P-selectin and PSGL-1 (P-selectin glycoprotein ligand-1)] since their rolling behaviour has been shown to mimic the dynamics of leucocyte rolling in vitro. HL-60 cells are neutrophilic promyelocytes that can undergo granulocytic differentiation upon exposure to compounds such as DMSO (dimethylsulfoxide). Using a parallel plate flow chamber functionalized with recombinant P-selectin–Fc chimaera, undifferentiated and DMSO-induced (48, 72 and 96 h) HL-60 cells were assayed for rolling behaviour. We found that depending on P-selectin incubation concentration, undifferentiated cells incurred up to a 6-fold increase in rolling velocity while subjected to an approximately 10-fold increase in biologically relevant shear stress. HL-60 cells exposed to DMSO for up to 72 h incurred up to a 3-fold increase in rolling velocity over the same shear stress range. Significantly, cells exposed for up to 96 h incurred up to a 9-fold decrease in rolling velocity, compared with undifferentiated HL-60 cells. Although cell surface and nuclear morphological changes were evident upon exposure to DMSO, flow cytometric analysis revealed that PSGL-1 expression was unchanged, irrespective of treatment duration. The results suggest that DMSO-treated HL-60 cells may be problematic as a substitute for neutrophils for trafficking studies during advanced stages of the LAC (leucocyte adhesion cascade). We suggest that remodelling of the cell surface during differentiation may affect rolling behaviour and that DMSO-treated HL-60 cells would behave differently from the normal leucocytes during inflammatory response in vivo.

scholarly journals MicroRNA-128 Confers Anti-Endothelial Adhesion and Anti-Migration Properties to Counteract Highly Metastatic Cervical Cancer Cells’ Migration in a Parallel-Plate Flow Chamber

2020 ◽  
Vol 22 (1) ◽  
pp. 215
Author(s):  
Pei-Chin Chuang ◽  
Chun-Wun Lu ◽  
Ching-Chin Tsai ◽  
Shun-Hung Tseng ◽  
Wen-Hong Su
Keyword(s):  
Cervical Cancer ◽  
Endothelial Cells ◽  
Cancer Cells ◽  
Parallel Plate ◽  
Flow Chamber ◽  
Caski Cell ◽  
Parallel Plate Flow Chamber ◽  
Cervical Cancer Cells ◽  
Vascular Adhesion

Despite the distant metastasis of cervical cancer cells being a prominent cause of mortality, neither the metastasis capacity nor the in vitro conditions mimicking adhesion of cervical cancer cells to endothelial cells have been fully elucidated. Circulating metastatic cancer cells undergo transendothelial migration and invade normal organs in distant metastasis; however, the putative molecular mechanism remains largely uncertain. In this study, we describe the use of an in vitro parallel-plate flow chamber to simulate the dynamic circulation stress on cervical cancer cells and elucidate their vascular adhesion and metastasis. We isolate the viable and shear stress-resistant (SSR) cervical cancer cells for mechanistic studies. Remarkably, the identified SSR-HeLa and SSR-CaSki exhibited high in vitro adhesive and metastatic activities. Hence, a consistently suppressed miR-128 level was revealed in SSR cell clones compared to those of parental wild-type (WT) cells. Overexpressed miR-128 attenuated SSR-HeLa cells’ adherence to human umbilical cord vein endothelial cells (HUVECs); in contrast, suppressed miR-128 efficiently augmented the static adhesion capacity in WT-HeLa and WT-CaSki cells. Hence, amplified miR-128 modestly abolished in vitro SSR-augmented HeLa and CaSki cell movement, whereas reduced miR-128 aggravated the migration speed in a time-lapse recording assay in WT groups. Consistently, the force expression of miR-128 alleviated the SSR-enhanced HeLa and CaSki cell mobility in a wound healing assay. Notably, miR-128 mediated SSR-enhanced HeLa and CaSki cells’ adhesion and metastasis through suppressed ITGA5, ITGB5, sLex, CEACAM-6, MMP9, and MMP23 transcript levels. Our data provide evidence suggesting that miR-128 is a promising microRNA that prevented endothelial cells’ adhesion and transendothelial migration to contribute to the SSR-enhanced adhesion and metastasis progression under a parallel-plate flow chamber system. This indicates that the nucleoid-based miR-128 strategy may be an attractive therapeutic strategy to eliminate tumor cells resistant to circulation shear flow, prevent vascular adhesion, and preclude subsequent transendothelial metastasis.

Sign in / Sign up

Export Citation Format

Share Document